ChangeSet 1.1537.6.7, 2005/02/17 20:45:52-05:00, [EMAIL PROTECTED]
[PATCH] sata_qstor: new basic driver for Pacific Digital
This is a new basic libata SATA driver
for the Pacific Digital QStor SATA/RAID card.
It features ordinary per-drive SATA with single-request DMA
for R/W commands, and PIO for everything else.
It currently does not implement any of the hardware RAID support,
nor hot-plug, nor the tagged/native command-queuing features.
On the other hand, it is small and simple as a result.
Signed-off-by: Mark Lord <[EMAIL PROTECTED]>
Signed-off-by: Jeff Garzik <[EMAIL PROTECTED]>
Documentation/Configure.help | 5
drivers/scsi/Config.in | 1
drivers/scsi/Makefile | 1
drivers/scsi/sata_qstor.c | 699 ++++++++++++++++++++++++++++++++++++++++++
include/linux/libata-compat.h | 10
5 files changed, 716 insertions(+)
diff -Nru a/Documentation/Configure.help b/Documentation/Configure.help
--- a/Documentation/Configure.help 2005-03-04 12:02:24 -08:00
+++ b/Documentation/Configure.help 2005-03-04 12:02:24 -08:00
@@ -9345,6 +9345,11 @@
If unsure, say N.
+CONFIG_SCSI_SATA_QSTOR
+ This option enables support for Pacific Digital Serial ATA QStor.
+
+ If unsure, say N.
+
CONFIG_SCSI_SATA_SX4
This option enables support for Promise Serial ATA SX4.
diff -Nru a/drivers/scsi/Config.in b/drivers/scsi/Config.in
--- a/drivers/scsi/Config.in 2005-03-04 12:02:24 -08:00
+++ b/drivers/scsi/Config.in 2005-03-04 12:02:24 -08:00
@@ -73,6 +73,7 @@
dep_tristate ' ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)'
CONFIG_SCSI_SATA_SVW $CONFIG_SCSI_SATA $CONFIG_PCI $CONFIG_EXPERIMENTAL
dep_tristate ' Intel PIIX/ICH SATA support' CONFIG_SCSI_ATA_PIIX
$CONFIG_SCSI_SATA $CONFIG_PCI
dep_tristate ' NVIDIA SATA support (EXPERIMENTAL)' CONFIG_SCSI_SATA_NV
$CONFIG_SCSI_SATA $CONFIG_PCI $CONFIG_EXPERIMENTAL
+dep_tristate ' Pacific Digital SATA QStor support' CONFIG_SCSI_SATA_QSTOR
$CONFIG_SCSI_SATA $CONFIG_PCI
dep_tristate ' Promise SATA TX2/TX4 support (EXPERIMENTAL)'
CONFIG_SCSI_SATA_PROMISE $CONFIG_SCSI_SATA $CONFIG_PCI $CONFIG_EXPERIMENTAL
dep_tristate ' Promise SATA SX4 support (EXPERIMENTAL)' CONFIG_SCSI_SATA_SX4
$CONFIG_SCSI_SATA $CONFIG_PCI $CONFIG_EXPERIMENTAL
dep_tristate ' Silicon Image SATA support (EXPERIMENTAL)'
CONFIG_SCSI_SATA_SIL $CONFIG_SCSI_SATA $CONFIG_PCI $CONFIG_EXPERIMENTAL
diff -Nru a/drivers/scsi/Makefile b/drivers/scsi/Makefile
--- a/drivers/scsi/Makefile 2005-03-04 12:02:24 -08:00
+++ b/drivers/scsi/Makefile 2005-03-04 12:02:24 -08:00
@@ -134,6 +134,7 @@
obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o
obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o
obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
+obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o
obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
diff -Nru a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/drivers/scsi/sata_qstor.c 2005-03-04 12:02:24 -08:00
@@ -0,0 +1,699 @@
+/*
+ * sata_qstor.c - Pacific Digital Corporation QStor SATA
+ *
+ * Maintained by: Mark Lord <[EMAIL PROTECTED]>
+ *
+ * Copyright 2005 Pacific Digital Corporation.
+ * (OSL/GPL code release authorized by Jalil Fadavi).
+ *
+ * The contents of this file are subject to the Open
+ * Software License version 1.1 that can be found at
+ * http://www.opensource.org/licenses/osl-1.1.txt and is included herein
+ * by reference.
+ *
+ * Alternatively, the contents of this file may be used under the terms
+ * of the GNU General Public License version 2 (the "GPL") as distributed
+ * in the kernel source COPYING file, in which case the provisions of
+ * the GPL are applicable instead of the above. If you wish to allow
+ * the use of your version of this file only under the terms of the
+ * GPL and not to allow others to use your version of this file under
+ * the OSL, indicate your decision by deleting the provisions above and
+ * replace them with the notice and other provisions required by the GPL.
+ * If you do not delete the provisions above, a recipient may use your
+ * version of this file under either the OSL or the GPL.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include <asm/io.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "sata_qstor"
+#define DRV_VERSION "0.03"
+
+enum {
+ QS_PORTS = 4,
+ QS_MAX_PRD = LIBATA_MAX_PRD,
+ QS_CPB_ORDER = 6,
+ QS_CPB_BYTES = (1 << QS_CPB_ORDER),
+ QS_PRD_BYTES = QS_MAX_PRD * 16,
+ QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES,
+
+ QS_DMA_BOUNDARY = ~0UL,
+
+ /* global register offsets */
+ QS_HCF_CNFG3 = 0x0003, /* host configuration offset */
+ QS_HID_HPHY = 0x0004, /* host physical interface info */
+ QS_HCT_CTRL = 0x00e4, /* global interrupt mask offset */
+ QS_HST_SFF = 0x0100, /* host status fifo offset */
+ QS_HVS_SERD3 = 0x0393, /* PHY enable offset */
+
+ /* global control bits */
+ QS_HPHY_64BIT = (1 << 1), /* 64-bit bus detected */
+ QS_CNFG3_GSRST = 0x01, /* global chip reset */
+ QS_SERD3_PHY_ENA = 0xf0, /* PHY detection ENAble*/
+
+ /* per-channel register offsets */
+ QS_CCF_CPBA = 0x0710, /* chan CPB base address */
+ QS_CCF_CSEP = 0x0718, /* chan CPB separation factor */
+ QS_CFC_HUFT = 0x0800, /* host upstream fifo threshold */
+ QS_CFC_HDFT = 0x0804, /* host downstream fifo threshold */
+ QS_CFC_DUFT = 0x0808, /* dev upstream fifo threshold */
+ QS_CFC_DDFT = 0x080c, /* dev downstream fifo threshold */
+ QS_CCT_CTR0 = 0x0900, /* chan control-0 offset */
+ QS_CCT_CTR1 = 0x0901, /* chan control-1 offset */
+ QS_CCT_CFF = 0x0a00, /* chan command fifo offset */
+
+ /* channel control bits */
+ QS_CTR0_REG = (1 << 1), /* register mode (vs. pkt mode) */
+ QS_CTR0_CLER = (1 << 2), /* clear channel errors */
+ QS_CTR1_RDEV = (1 << 1), /* sata phy/comms reset */
+ QS_CTR1_RCHN = (1 << 4), /* reset channel logic */
+ QS_CCF_RUN_PKT = 0x107, /* RUN a new dma PKT */
+
+ /* pkt sub-field headers */
+ QS_HCB_HDR = 0x01, /* Host Control Block header */
+ QS_DCB_HDR = 0x02, /* Device Control Block header */
+
+ /* pkt HCB flag bits */
+ QS_HF_DIRO = (1 << 0), /* data DIRection Out */
+ QS_HF_DAT = (1 << 3), /* DATa pkt */
+ QS_HF_IEN = (1 << 4), /* Interrupt ENable */
+ QS_HF_VLD = (1 << 5), /* VaLiD pkt */
+
+ /* pkt DCB flag bits */
+ QS_DF_PORD = (1 << 2), /* Pio OR Dma */
+ QS_DF_ELBA = (1 << 3), /* Extended LBA (lba48) */
+
+ /* PCI device IDs */
+ board_2068_idx = 0, /* QStor 4-port SATA/RAID */
+};
+
+typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t;
+
+struct qs_port_priv {
+ u8 *pkt;
+ dma_addr_t pkt_dma;
+ qs_state_t state;
+};
+
+static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg);
+static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id
*ent);
+static irqreturn_t qs_intr (int irq, void *dev_instance, struct pt_regs *regs);
+static int qs_port_start(struct ata_port *ap);
+static void qs_host_stop(struct ata_host_set *host_set);
+static void qs_port_stop(struct ata_port *ap);
+static void qs_phy_reset(struct ata_port *ap);
+static void qs_qc_prep(struct ata_queued_cmd *qc);
+static int qs_qc_issue(struct ata_queued_cmd *qc);
+static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
+static void qs_bmdma_stop(struct ata_port *ap);
+static u8 qs_bmdma_status(struct ata_port *ap);
+static void qs_irq_clear(struct ata_port *ap);
+
+static Scsi_Host_Template qs_ata_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .detect = ata_scsi_detect,
+ .release = ata_scsi_release,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .eh_strategy_handler = ata_scsi_error,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = QS_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .use_new_eh_code = ATA_SHT_NEW_EH_CODE,
+ .emulated = ATA_SHT_EMULATED,
+ //FIXME .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .use_clustering = ENABLE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations qs_ata_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .check_atapi_dma = qs_check_atapi_dma,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+ .phy_reset = qs_phy_reset,
+ .qc_prep = qs_qc_prep,
+ .qc_issue = qs_qc_issue,
+ .eng_timeout = ata_eng_timeout,
+ .irq_handler = qs_intr,
+ .irq_clear = qs_irq_clear,
+ .scr_read = qs_scr_read,
+ .scr_write = qs_scr_write,
+ .port_start = qs_port_start,
+ .port_stop = qs_port_stop,
+ .host_stop = qs_host_stop,
+ .bmdma_stop = qs_bmdma_stop,
+ .bmdma_status = qs_bmdma_status,
+};
+
+static struct ata_port_info qs_port_info[] = {
+ /* board_2068_idx */
+ {
+ .sht = &qs_ata_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SATA_RESET |
+ //FIXME ATA_FLAG_SRST |
+ ATA_FLAG_MMIO,
+ .pio_mask = 0x10, /* pio4 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &qs_ata_ops,
+ },
+};
+
+static struct pci_device_id qs_ata_pci_tbl[] = {
+ { PCI_VENDOR_ID_PDC, 0x2068, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2068_idx },
+
+ { } /* terminate list */
+};
+
+static struct pci_driver qs_ata_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = qs_ata_pci_tbl,
+ .probe = qs_ata_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+static int qs_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ return 1; /* ATAPI DMA not supported */
+}
+
+static void qs_bmdma_stop(struct ata_port *ap)
+{
+ /* nothing */
+}
+
+static u8 qs_bmdma_status(struct ata_port *ap)
+{
+ return 0;
+}
+
+static void qs_irq_clear(struct ata_port *ap)
+{
+ /* nothing */
+}
+
+static void qs_enter_reg_mode(struct ata_port *ap)
+{
+ u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
+
+ writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
+ readb(chan + QS_CCT_CTR0); /* flush */
+}
+
+static void qs_phy_reset(struct ata_port *ap)
+{
+ u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
+ struct qs_port_priv *pp = ap->private_data;
+
+ pp->state = qs_state_idle;
+ writeb(QS_CTR1_RCHN, chan + QS_CCT_CTR1);
+ qs_enter_reg_mode(ap);
+ sata_phy_reset(ap);
+}
+
+static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg)
+{
+ if (sc_reg > SCR_CONTROL)
+ return ~0U;
+ return readl((void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8)));
+}
+
+static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
+{
+ if (sc_reg > SCR_CONTROL)
+ return;
+ writel(val, (void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8)));
+}
+
+static void qs_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct scatterlist *sg = qc->sg;
+ struct ata_port *ap = qc->ap;
+ struct qs_port_priv *pp = ap->private_data;
+ unsigned int nelem;
+ u8 *prd = pp->pkt + QS_CPB_BYTES;
+
+ assert(sg != NULL);
+ assert(qc->n_elem > 0);
+
+ for (nelem = 0; nelem < qc->n_elem; nelem++,sg++) {
+ u64 addr;
+ u32 len;
+
+ addr = sg_dma_address(sg);
+ *(u64 *)prd = cpu_to_le64(addr);
+ prd += sizeof(u64);
+
+ len = sg_dma_len(sg);
+ *(u32 *)prd = cpu_to_le32(len);
+ prd += sizeof(u64);
+
+ VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem,
+ (unsigned long long)addr, len);
+ }
+}
+
+static void qs_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct qs_port_priv *pp = qc->ap->private_data;
+ u8 dflags = QS_DF_PORD, *buf = pp->pkt;
+ u8 hflags = QS_HF_DAT | QS_HF_IEN | QS_HF_VLD;
+ u64 addr;
+
+ VPRINTK("ENTER\n");
+
+ qs_enter_reg_mode(qc->ap);
+ if (qc->tf.protocol != ATA_PROT_DMA) {
+ ata_qc_prep(qc);
+ return;
+ }
+
+ qs_fill_sg(qc);
+
+ if ((qc->tf.flags & ATA_TFLAG_WRITE))
+ hflags |= QS_HF_DIRO;
+ if ((qc->tf.flags & ATA_TFLAG_LBA48))
+ dflags |= QS_DF_ELBA;
+
+ /* host control block (HCB) */
+ buf[ 0] = QS_HCB_HDR;
+ buf[ 1] = hflags;
+ *(u32 *)(&buf[ 4]) = cpu_to_le32(qc->nsect * ATA_SECT_SIZE);
+ *(u32 *)(&buf[ 8]) = cpu_to_le32(qc->n_elem);
+ addr = ((u64)pp->pkt_dma) + QS_CPB_BYTES;
+ *(u64 *)(&buf[16]) = cpu_to_le64(addr);
+
+ /* device control block (DCB) */
+ buf[24] = QS_DCB_HDR;
+ buf[28] = dflags;
+
+ /* frame information structure (FIS) */
+ ata_tf_to_fis(&qc->tf, &buf[32], 0);
+}
+
+static inline void qs_packet_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
+
+ VPRINTK("ENTER, ap %p\n", ap);
+
+ writeb(QS_CTR0_CLER, chan + QS_CCT_CTR0);
+ wmb(); /* flush PRDs and pkt to memory */
+ writel(QS_CCF_RUN_PKT, chan + QS_CCT_CFF);
+ readl(chan + QS_CCT_CFF); /* flush */
+}
+
+static int qs_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct qs_port_priv *pp = qc->ap->private_data;
+
+ switch (qc->tf.protocol) {
+ case ATA_PROT_DMA:
+
+ pp->state = qs_state_pkt;
+ qs_packet_start(qc);
+ return 0;
+
+ case ATA_PROT_ATAPI_DMA:
+ BUG();
+ break;
+
+ default:
+ break;
+ }
+
+ pp->state = qs_state_mmio;
+ return ata_qc_issue_prot(qc);
+}
+
+static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set)
+{
+ unsigned int handled = 0;
+ u8 sFFE;
+ u8 __iomem *mmio_base = host_set->mmio_base;
+
+ do {
+ u32 sff0 = readl(mmio_base + QS_HST_SFF);
+ u32 sff1 = readl(mmio_base + QS_HST_SFF + 4);
+ u8 sEVLD = (sff1 >> 30) & 0x01; /* valid flag */
+ sFFE = sff1 >> 31; /* empty flag */
+
+ if (sEVLD) {
+ u8 sDST = sff0 >> 16; /* dev status */
+ u8 sHST = sff1 & 0x3f; /* host status */
+ unsigned int port_no = (sff1 >> 8) & 0x03;
+ struct ata_port *ap = host_set->ports[port_no];
+
+ DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n",
+ sff1, sff0, port_no, sHST, sDST);
+ handled = 1;
+ if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
+ struct ata_queued_cmd *qc;
+ struct qs_port_priv *pp = ap->private_data;
+ if (!pp || pp->state != qs_state_pkt)
+ continue;
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+ switch (sHST) {
+ case 0: /* sucessful CPB */
+ case 3: /* device error */
+ pp->state = qs_state_idle;
+ qs_enter_reg_mode(qc->ap);
+ ata_qc_complete(qc, sDST);
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ }
+ } while (!sFFE);
+ return handled;
+}
+
+static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set)
+{
+ unsigned int handled = 0, port_no;
+
+ for (port_no = 0; port_no < host_set->n_ports; ++port_no) {
+ struct ata_port *ap;
+ ap = host_set->ports[port_no];
+ if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
+ struct ata_queued_cmd *qc;
+ struct qs_port_priv *pp = ap->private_data;
+ if (!pp || pp->state != qs_state_mmio)
+ continue;
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+
+ /* check main status, clearing INTRQ */
+ u8 status = ata_chk_status(ap);
+ if ((status & ATA_BUSY))
+ continue;
+ DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
+ ap->id, qc->tf.protocol, status);
+
+ /* complete taskfile transaction */
+ pp->state = qs_state_idle;
+ ata_qc_complete(qc, status);
+ handled = 1;
+ }
+ }
+ }
+ return handled;
+}
+
+static irqreturn_t qs_intr(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ata_host_set *host_set = dev_instance;
+ unsigned int handled = 0;
+
+ VPRINTK("ENTER\n");
+
+ spin_lock(&host_set->lock);
+ handled = qs_intr_pkt(host_set) | qs_intr_mmio(host_set);
+ spin_unlock(&host_set->lock);
+
+ VPRINTK("EXIT\n");
+
+ return IRQ_RETVAL(handled);
+}
+
+static void qs_ata_setup_port(struct ata_ioports *port, unsigned long base)
+{
+ port->cmd_addr =
+ port->data_addr = base + 0x400;
+ port->error_addr =
+ port->feature_addr = base + 0x408; /* hob_feature = 0x409 */
+ port->nsect_addr = base + 0x410; /* hob_nsect = 0x411 */
+ port->lbal_addr = base + 0x418; /* hob_lbal = 0x419 */
+ port->lbam_addr = base + 0x420; /* hob_lbam = 0x421 */
+ port->lbah_addr = base + 0x428; /* hob_lbah = 0x429 */
+ port->device_addr = base + 0x430;
+ port->status_addr =
+ port->command_addr = base + 0x438;
+ port->altstatus_addr =
+ port->ctl_addr = base + 0x440;
+ port->scr_addr = base + 0xc00;
+}
+
+static int qs_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct qs_port_priv *pp;
+ void __iomem *mmio_base = ap->host_set->mmio_base;
+ void __iomem *chan = mmio_base + (ap->port_no * 0x4000);
+ u64 addr;
+ int rc;
+
+ rc = ata_port_start(ap);
+ if (rc)
+ return rc;
+ qs_enter_reg_mode(ap);
+ pp = kcalloc(1, sizeof(*pp), GFP_KERNEL);
+ if (!pp) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ pp->pkt = dma_alloc_coherent(dev, QS_PKT_BYTES, &pp->pkt_dma,
+ GFP_KERNEL);
+ if (!pp->pkt) {
+ rc = -ENOMEM;
+ goto err_out_kfree;
+ }
+ memset(pp->pkt, 0, QS_PKT_BYTES);
+ ap->private_data = pp;
+
+ addr = (u64)pp->pkt_dma;
+ writel((u32) addr, chan + QS_CCF_CPBA);
+ writel((u32)(addr >> 32), chan + QS_CCF_CPBA + 4);
+ return 0;
+
+err_out_kfree:
+ kfree(pp);
+err_out:
+ ata_port_stop(ap);
+ return rc;
+}
+
+static void qs_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct qs_port_priv *pp = ap->private_data;
+
+ if (pp != NULL) {
+ ap->private_data = NULL;
+ if (pp->pkt != NULL)
+ dma_free_coherent(dev, QS_PKT_BYTES, pp->pkt,
+ pp->pkt_dma);
+ kfree(pp);
+ }
+ ata_port_stop(ap);
+}
+
+static void qs_host_stop(struct ata_host_set *host_set)
+{
+ void __iomem *mmio_base = host_set->mmio_base;
+
+ writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
+ writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
+}
+
+static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
+{
+ void __iomem *mmio_base = pe->mmio_base;
+ unsigned int port_no;
+
+ writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
+ writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
+
+ /* reset each channel in turn */
+ for (port_no = 0; port_no < pe->n_ports; ++port_no) {
+ u8 __iomem *chan = mmio_base + (port_no * 0x4000);
+ writeb(QS_CTR1_RDEV|QS_CTR1_RCHN, chan + QS_CCT_CTR1);
+ writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
+ readb(chan + QS_CCT_CTR0); /* flush */
+ }
+ writeb(QS_SERD3_PHY_ENA, mmio_base + QS_HVS_SERD3); /* enable phy */
+
+ for (port_no = 0; port_no < pe->n_ports; ++port_no) {
+ u8 __iomem *chan = mmio_base + (port_no * 0x4000);
+ /* set FIFO depths to same settings as Windows driver */
+ writew(32, chan + QS_CFC_HUFT);
+ writew(32, chan + QS_CFC_HDFT);
+ writew(10, chan + QS_CFC_DUFT);
+ writew( 8, chan + QS_CFC_DDFT);
+ /* set CPB size in bytes, as a power of two */
+ writeb(QS_CPB_ORDER, chan + QS_CCF_CSEP);
+ }
+ writeb(1, mmio_base + QS_HCT_CTRL); /* enable host interrupts */
+}
+
+/*
+ * The QStor understands 64-bit buses, and uses 64-bit fields
+ * for DMA pointers regardless of bus width. We just have to
+ * make sure our DMA masks are set appropriately for whatever
+ * bridge lies between us and the QStor, and then the DMA mapping
+ * code will ensure we only ever "see" appropriate buffer addresses.
+ * If we're 32-bit limited somewhere, then our 64-bit fields will
+ * just end up with zeros in the upper 32-bits, without any special
+ * logic required outside of this routine (below).
+ */
+static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
+{
+ u32 bus_info = readl(mmio_base + QS_HID_HPHY);
+ int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT);
+
+ if (have_64bit_bus &&
+ !pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
+ /* do nothing */
+ } else {
+ rc = pci_set_dma_mask(pdev, 0xffffffffULL);
+ if (rc) {
+ printk(KERN_ERR DRV_NAME
+ "(%s): 32-bit DMA enable failed\n",
+ pci_name(pdev));
+ return rc;
+ }
+ }
+ return 0;
+}
+
+static int qs_ata_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int printed_version;
+ struct ata_probe_ent *probe_ent = NULL;
+ void __iomem *mmio_base;
+ unsigned int board_idx = (unsigned int) ent->driver_data;
+ int rc, port_no;
+
+ if (!printed_version++)
+ printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out;
+
+ if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) {
+ rc = -ENODEV;
+ goto err_out_regions;
+ }
+
+ mmio_base = ioremap(pci_resource_start(pdev, 4),
+ pci_resource_len(pdev, 4));
+ if (mmio_base == NULL) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ rc = qs_set_dma_masks(pdev, mmio_base);
+ if (rc)
+ goto err_out_iounmap;
+
+ probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ if (probe_ent == NULL) {
+ rc = -ENOMEM;
+ goto err_out_iounmap;
+ }
+
+ memset(probe_ent, 0, sizeof(*probe_ent));
+ probe_ent->dev = pci_dev_to_dev(pdev);
+ INIT_LIST_HEAD(&probe_ent->node);
+
+ probe_ent->sht = qs_port_info[board_idx].sht;
+ probe_ent->host_flags = qs_port_info[board_idx].host_flags;
+ probe_ent->pio_mask = qs_port_info[board_idx].pio_mask;
+ probe_ent->mwdma_mask = qs_port_info[board_idx].mwdma_mask;
+ probe_ent->udma_mask = qs_port_info[board_idx].udma_mask;
+ probe_ent->port_ops = qs_port_info[board_idx].port_ops;
+
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->mmio_base = mmio_base;
+ probe_ent->n_ports = QS_PORTS;
+
+ for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
+ unsigned long chan = (unsigned long)mmio_base +
+ (port_no * 0x4000);
+ qs_ata_setup_port(&probe_ent->port[port_no], chan);
+ }
+
+ pci_set_master(pdev);
+
+ /* initialize adapter */
+ qs_host_init(board_idx, probe_ent);
+
+ ata_add_to_probe_list(probe_ent);
+ return 0;
+
+err_out_iounmap:
+ iounmap(mmio_base);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out:
+ pci_disable_device(pdev);
+ return rc;
+}
+
+static int __init qs_ata_init(void)
+{
+ int rc;
+
+ rc = pci_module_init(&qs_ata_pci_driver);
+ if (rc)
+ return rc;
+
+ rc = scsi_register_module(MODULE_SCSI_HA, &qs_ata_sht);
+ if (rc) {
+ rc = -ENODEV;
+ goto err_out;
+ }
+
+ return 0;
+
+err_out:
+ pci_unregister_driver(&qs_ata_pci_driver);
+ return rc;
+}
+
+static void __exit qs_ata_exit(void)
+{
+ scsi_unregister_module(MODULE_SCSI_HA, &qs_ata_sht);
+ pci_unregister_driver(&qs_ata_pci_driver);
+}
+
+MODULE_AUTHOR("Mark Lord");
+MODULE_DESCRIPTION("Pacific Digital Corporation QStor SATA low-level driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, qs_ata_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(qs_ata_init);
+module_exit(qs_ata_exit);
diff -Nru a/include/linux/libata-compat.h b/include/linux/libata-compat.h
--- a/include/linux/libata-compat.h 2005-03-04 12:02:24 -08:00
+++ b/include/linux/libata-compat.h 2005-03-04 12:02:24 -08:00
@@ -3,6 +3,7 @@
#include <linux/delay.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#define MODULE_VERSION(ver_str)
@@ -41,5 +42,14 @@
pci_get_drvdata(to_pci_dev(dev))
#define dev_set_drvdata(dev,ptr) \
pci_set_drvdata(to_pci_dev(dev),(ptr))
+
+static inline void *kcalloc(size_t nmemb, size_t size, int flags)
+{
+ size_t total = nmemb * size;
+ void *mem = kmalloc(total, flags);
+ if (mem)
+ memset(mem, 0, total);
+ return mem;
+}
#endif /* __LIBATA_COMPAT_H__ */
-
To unsubscribe from this list: send the line "unsubscribe bk-commits-24" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
