Hi, Since I made my system I get errors : Mar 6 09:31:27 eco-panel kernel: hda: status timeout: status=0xd0 { Busy } Mar 6 09:31:27 eco-panel kernel: ide: failed opcode was: unknown Mar 6 09:31:27 eco-panel kernel: hda: no DRQ after issuing MULTWRITE Mar 6 09:31:27 eco-panel kernel: ide0: reset: success
It seems not to harm the system, but I wanted to ask if it can be solved. This I get when the ssytem starts : Mar 5 13:52:23 eco-panel kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Mar 5 13:52:23 eco-panel kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Mar 5 13:52:23 eco-panel kernel: Probing IDE interface ide0... Mar 5 13:52:23 eco-panel kernel: hda: ST650211CFA1, CFA DISK drive Mar 5 13:52:23 eco-panel kernel: Probing IDE interface ide1... Mar 5 13:52:23 eco-panel kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Mar 5 13:52:23 eco-panel kernel: hda: max request size: 128KiB Mar 5 13:52:23 eco-panel kernel: hda: 9767520 sectors (5000 MB) w/128KiB Cache, CHS=9690/16/63 Mar 5 13:52:23 eco-panel kernel: hda: cache flushes supported Mar 5 13:52:23 eco-panel kernel: hda: hda1 hda2 The disk is a CF microdrive from Hitachi. Regards, Koenraad Lelong. -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page