Morning James
I've added some more debugging to the script, so check out the latest
version.
Have you used the debug logging before? Try setting:
casper_log_groups={'all'}
And rerunning your scripts.
Cheers
Paul
On 1 June 2015 at 15:24, James Smith <jsm...@ska.ac.za> wrote:
> Hi Paul,
>
> I wasn't sure what debug information I'd be able to get from this script
> directly, but I found that it gets called by write_info_table.m in the same
> folder.
>
> So at around line 16 in the script I added a "try .. catch" around the
> call to the sblock_to_info function, with e.stack and error(['Error
> occurred when processing ', tag, '.'])
>
> Should that tell me a little more info about where the problem occurs? Or
> is there another more elegant way to get that information?
>
> Regards,
> James
>
>
> On Mon, Jun 1, 2015 at 10:54 AM, Paul Prozesky <paul.proze...@gmail.com>
> wrote:
>
>> Hi James
>>
>> You can see that your error is happening in this section of that script:
>>
>> if isempty(strtrim(value)) == 1,
>> error('Empty value?');
>> end
>>
>>
>> So add some debug logging there and rerun the gen_xps_add_design_info
>> part of the build.
>>
>> Cheers
>> Paul
>>
>>
>>
>>
>>
>> On 1 June 2015 at 10:39, James Smith <jsm...@ska.ac.za> wrote:
>>
>>> Hi Paul,
>>>
>>> Thanks, I have found that script. I can't think of a way to go about
>>> finding out which part it has a problem with though, except possibly
>>> starting several different compiles, removing a component from each, and
>>> seeing which ones pass / fail.
>>>
>>> Is this a sound approach?
>>>
>>> James
>>>
>>>
>>> On Mon, Jun 1, 2015 at 10:34 AM, Paul Prozesky <paul.proze...@gmail.com>
>>> wrote:
>>>
>>>> Hi James
>>>>
>>>> Check the sblock_to_info script in the +design_info (no, the plus isn't
>>>> a mistake, it's a matlab thing) folder in your xps_library folder.
>>>> Something is that script is not happy with one of the blocks in your model
>>>> file.
>>>>
>>>> Cheers
>>>> Paul
>>>>
>>>>
>>>> On 1 June 2015 at 10:27, James Smith <jsm...@ska.ac.za> wrote:
>>>>
>>>>> Hi all,
>>>>>
>>>>> I'm working on a simple design for a two-stage high-resolution
>>>>> spectrometer, which almost gets finished compiling, sysgen seems to
>>>>> finish,
>>>>> and then at the end fails with a most uninformative error message:
>>>>>
>>>>> ##########################
>>>>> ## Creating EDK files ##
>>>>> ##########################
>>>>> Error using design_info.sblock_to_info (line 18)
>>>>> Empty value?
>>>>>
>>>>> Anyone else seen this problem before? The sysgen*.log files contain
>>>>> basically zero information, and I've grepped for as many combinations of
>>>>> the "design_info.sblock_to_info" string as I can think of, to no avail.
>>>>>
>>>>> If anyone has some insight that can point me in the right direction,
>>>>> I'd appreciate it. I can send the .slx file to anyone who would like to
>>>>> look at it, I didn't think the mailing list would be an appropriate place
>>>>> to attach it (about 7 MB).
>>>>>
>>>>> Regards,
>>>>> James
>>>>>
>>>>>
>>>>
>>>
>>
>
