For the adder, have you clicked the icon at the top marked with a pair of binoculars to auto-scale the axes?
For the counter, are your control signal and slicing definitely correct -- i.e., is the reset of the counter 0, and the enable of the counter 1? Cheers Jack On Tue, 14 Jun 2016 at 11:00 Christopher Barnes <barnc...@umich.edu> wrote: > Jack, > > I'm not able to reproduce the counter output ( > https://casper.berkeley.edu/wiki/File:Counter_sim.png) or the Adder > Output (https://casper.berkeley.edu/wiki/File:Adder_sim.png). Instead of > those two, I get a line at 0 for the counter output and then just an empty > set of axes for the adder output. > > On Tue, Jun 14, 2016 at 1:56 PM, Jack Hickish <jackhick...@gmail.com> > wrote: > >> Hi Christopher, >> >> Which scope outputs are you not able to reproduce from the wiki? What >> outputs did you see? >> >> Cheers >> Jack >> >> On Tue, 14 Jun 2016 at 10:21 Christopher Barnes <barnc...@umich.edu> >> wrote: >> >>> Hello, >>> >>> My name is Christopher Barnes, and I'm a graduate student at the >>> University of Michigan. I'm working through the first four tutorials on >>> the Casper website (located at >>> https://casper.berkeley.edu/wiki/Tutorials) to program a ROACH2 as a >>> wideband pocket correlator. I've finished building the .mdl file from the >>> first tutorial, and my output from the scopes did not match what is >>> displayed on the webpage, so I'm requesting some help with this. I'm a >>> beginner, so I'm not sure what the problem could be aside from the cookbook >>> instructions on the website. >>> >>> If you're willing to help me, then please email me back and I can show >>> you my file. My suspicion is that the discrepancy between my output and >>> the output on the webpage is caused by an outdated release of the tools in >>> Simulink. >>> >>> >>> > > > -- > Physics Graduate Student Symposium > University of Michigan > sympphysg...@umich.edu > Website <http://logan.physics.lsa.umich.edu/gss/> > >
