Hello James,
Same cable , same ROACH board with same SD card but I changed the
machine(Ubuntu 14.04) in which I initially set the boot sequences. I
could able to interrupt and select the boot order (mmcboot).
The data acquisition machine is Ubuntu 18.04 which has advanced version
of gtkterm and extra baud-rates functionality and etc... Might be some
bug in that..
thanks and regards
Indrajit
On Wednesday 13 February 2019 05:18 PM, James Smith wrote:
Hello Indrajit,
Check the settings on your serial connection - did you turn off Flow
Control?
Regards,
James
On Wed, Feb 13, 2019 at 1:47 PM indrajit <indra...@iiap.res.in
<mailto:indra...@iiap.res.in>> wrote:
Hello James,
I am also doing the same. I am able to see the booting sequences
via the serial terminal counting down from 10 and I am trying to
interrupt but the keystrokes are not interrupting the boot menu.
Even I changed the SD card which is logically nothing to do with
the booting sequence.
Thanks and regards
Indrajit
On Wednesday 13 February 2019 05:07 PM, James Smith wrote:
Hello Indrajit,
Why were you not able to interrupt the process? Connect to the
ROACH via the serial port then reset it - you should be able then
to see the place to interrupt and set netboot (or whatever else
you need) quite easily.
Regards,
James
On Wed, Feb 13, 2019 at 1:31 PM indrajit <indra...@iiap.res.in
<mailto:indra...@iiap.res.in>> wrote:
Hello all,
A new ROACH1 while taking measurements stopped responding.
Then via
serial communication, found that it got booted using the flash.
Restarted and trying to interrupt using the serial terminal
and boot via
MMC-BOOT. I couldn't interrupt using the keyboard. I
inserted another
working SD card and tried the same. Failed to boot via the
memory card.
Thanks and regards
indrajit
--
You received this message because you are subscribed to the
Google Groups "casper@lists.berkeley.edu
<mailto:casper@lists.berkeley.edu>" group.
To unsubscribe from this group and stop receiving emails from
it, send an email to casper+unsubscr...@lists.berkeley.edu
<mailto:casper%2bunsubscr...@lists.berkeley.edu>.
To post to this group, send email to
casper@lists.berkeley.edu <mailto:casper@lists.berkeley.edu>.
--
You received this message because you are subscribed to the
Google Groups "casper@lists.berkeley.edu"
<mailto:casper@lists.berkeley.edu> group.
To unsubscribe from this group and stop receiving emails from it,
send an email to casper+unsubscr...@lists.berkeley.edu
<mailto:casper+unsubscr...@lists.berkeley.edu>.
To post to this group, send email to casper@lists.berkeley.edu
<mailto:casper@lists.berkeley.edu>.
--
You received this message because you are subscribed to the Google
Groups "casper@lists.berkeley.edu
<mailto:casper@lists.berkeley.edu>" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to casper+unsubscr...@lists.berkeley.edu
<mailto:casper+unsubscr...@lists.berkeley.edu>.
To post to this group, send email to casper@lists.berkeley.edu
<mailto:casper@lists.berkeley.edu>.
--
You received this message because you are subscribed to the Google
Groups "casper@lists.berkeley.edu" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to casper+unsubscr...@lists.berkeley.edu
<mailto:casper+unsubscr...@lists.berkeley.edu>.
To post to this group, send email to casper@lists.berkeley.edu
<mailto:casper@lists.berkeley.edu>.
--
You received this message because you are subscribed to the Google Groups
"casper@lists.berkeley.edu" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to casper+unsubscr...@lists.berkeley.edu.
To post to this group, send email to casper@lists.berkeley.edu.