Jin,

Remove the FXS, configure Transcoding for 2 sessions, see if it works then
shutdown and plug the fxs back in.  Always insert the VIC's from right to
left.

On Sun, Mar 29, 2009 at 10:32 PM, CCIE OSL <ccie...@gmail.com> wrote:

>
> I have purchased a 1760 router with PVDM-12 and CME.and FXS
> Just so that I can play with it at home.
>  I normally use Proctorslab.
>
> Now I am trying to configure Transcoder,
> But it will not work,
>
> Accouring to the Cisco DOC, 1760 only support PVDM-256k-4,8,12..NOT PVDM2.
> However, when I call from my FXS port to local CME phone it work fine with
> DSP farm showing trancording.
>
> SPMM  DSPRM  State   Image     D-sig  D-sig     A-sig  A-sig  Mips
> Voice/Xcode
>   Dsp   Dsp                  allocate   free  allocate   free  Free
> Chan
>   0/0     0      UP   FIXHC         0      0         2      0    50
> 1
>   0/1     1      UP   FLEX6         0      6         0      0   100
> 0
>   0/2     2      UP   FLEX6         0      6         0      0   100
> 0
>
> So, Is the PVDM2 working on 1760?? or is not??
>
> In any case, somehow I got it to register sdspfarm for CME, but now my FXZ
> phone stops working.
> I guess I took the DSP resource away from FXS,
> So I change sdspfarm max-session from 4 to 2 and reload the router, Now, mu
> FXS phone works but sdspfarm is no longer registered.
>
> mtp-1 Device:mtp0014a8202e0f TCP socket:[-1]  UNREGISTERED
> actual_stream:0 max_stream 0 IP:0.0.0.0  0  Unknown 0 keepalive 0
>
>  max-mtps:1, max-streams:4, alloc-streams:0, act-streams::0
>
> Can someone help????????????
>
> /Jin Jung..
>
>  Cisco 1751 and Cisco 1760 Routers
>
> Cisco 1751 and Cisco 1760 routers use the following PVDMs:
>
> •PVDM-256K-4 (1 DSP)
>
> •PVDM-256K-8 (2 DSPs)
>
> •PVDM-256K-12 (3 DSPs)
>
> •PVDM-256K-16HD (4 DSPs)
>
> •PVDM-256K-20HD (5 DSPs)
>
>  DSP Farms for NM-HDVs: Example
>
> The following example sets up a DSP farm of 4 DSPs to handle up to 16
> sessions (4 sessions per DSP) on a router with an IP address of 10.5.49.160
> and a priority of 1 among other servers.
>
> voice-card 1
>  dsp services dspfarm
>
>  exit
>
> sccp local FastEthernet 0/0
>
> sccp
>
> sccp ccm 10.5.49.160 priority 1
>
> dspfarm transcoder maximum sessions 16
>
> dspfarm
>
> telephony-service
>
>  ip source-address 10.5.49.200 port 2000
>
>  sdspfarm units 4
>
>  sdspfarm transcode sessions 40
>
>  sdspfarm tag 1 mtp000a8eaca80
>
>
>
>
>
>
>
>

<<blank.gif>>

Reply via email to