Hi George,

I think that part can be made from an aluminum or a steel tube with proper OD. 
The ID seems only need to be large enough to allow the glass tube to fit in - 
depending what is allowed by the two black end adaptors. You can check your 
engineering department or some machine shops to find some one to cut the tubes, 
ground the ends and machine the threads for you. Of course you won't be able to 
see through the wall now, but it will be a very strong column. The expense I 
think would mainly be labor.

Zhijie


From: George Kontopidis 
Sent: Wednesday, March 20, 2013 3:27 PM
To: 'Zhijie Li' 
Subject: RE: [ccp4bb] column tube


Dear Zhijie, 

 

 

I am looking for the external clear plastic tube of       

Bio-rad UNO Q1 Column  720-0001

 

Column information:

http://www.bio-rad.com/prd/en/GR/LSR/PDP/d825a6ab-49cf-4140-91c3-ea131c886b74/UNO-Monolith-Anion-Exchange-Columns

 

 

see also attached the broken plastic tube.

 

Unfortunately the company does not provide me with additional information 
regarding plastic type. Although we know that the plastic should stand 700 psi 
pressure.

 

thanks

 

George

 

 

From: CCP4 bulletin board [mailto:CCP4BB@JISCMAIL.AC.UK] On Behalf Of Zhijie Li
Sent: Wednesday, March 20, 2013 9:13 PM
To: CCP4BB@JISCMAIL.AC.UK
Subject: Re: [ccp4bb] column tube

 

Hi George,

 

What is the plastic tube? Is it part of the end adaptors or it is part of the 
tubing? What type of plastic it is? If you can provide a photograph of the 
broken part maybe someone can give you more useful suggestions. 

 

Zhijie

 

From: George Kontopidis 

Sent: Wednesday, March 20, 2013 2:28 PM

To: CCP4BB@JISCMAIL.AC.UK 

Subject: [ccp4bb] column tube

 

Dear Colleagues,

 

Apologies for the non-crystallographic question but it very likely that someone 
out there may have the answer.

I have a  chromatography column. Unfortunately the company does not provide a 
replacement for the plastic tube, which should not cost more than 100 €. The 
cost for a new column is more than 1500 €!

Does anybody know if there is a company that could provide custom-made plastic 
tubing for chromatography columns?

 

Thanks in advance for your answers,

 

 

George Kontopidis

 

 

Assοciate Professor of Biochemistry

Veterinary School, University of Thessaly

Karditsa 43100, Greece

Tel: +30 24410 66017

Mob: +30 69 342 643 75

e-mail: gkontopi...@vet.uth.gr

web site: http://www.vet.uth.gr/english/

 

Reply via email to