Hola, Le 20/03/2013 09:24, Antonio Manogué Saiz a écrit : > > Buenos días. > > Tengo un problema que nunca me había pasado y con el que llevo un tiempo > bloqueado. > > En un sistema (virtualizado con VMWare) CentOS6.3 tengo 1 tarjeta de red > funcionando correctamente. Ahora necesito añadirle una segunda tarjeta de > red. La tarjeta se instala correctamente según los registros que quedan en > messages . La puedo configurar sin problemas desde system-config-network-tui > . Cuando la activo con ifup ethX no me da ningún problema ni veo entradas en > los logs que indiquen error, pero a los pocos segundos (2-3 seg) se pierde la > conexión con la otra IP. Si hago un ifdown ethX y reinicio network vuelve a > funcionar todo correctamente. De hw no parece ya que he probado con tarjetas > diferentes y el comportamiento es el mismo. Las vmtools están actualizadas. > > Este es un tail del messages cuando he activado-desactivado-reiniciado y los > ficheros de configuración de las tarjetas. La que está operativa es la eth1 y > la que no me deja configurar es la eth3 > > [root@lorentz log]# tail -n 40 messages > Mar 20 07:55:11 lorentz ntpd[1765]: Listening on interface #15 eth3, > 10.1.10.68#123 Enabled > Mar 20 07:55:28 lorentz ntpd[1765]: Deleting interface #14 eth3, > fe80::250:56ff:fe8a:45de#123, interface stats: received=0, sent=0, dropped=0, > active_time=17 secs > Mar 20 07:55:28 lorentz ntpd[1765]: Deleting interface #15 eth3, > 10.1.10.68#123, interface stats: received=0, sent=0, dropped=0, > active_time=17 secs > Mar 20 07:58:48 lorentz ntpd[1765]: synchronized to 10.1.2.54, stratum 3 > Mar 20 08:00:22 lorentz ntpd[1765]: time reset -34.361615 s > Mar 20 08:09:26 lorentz system-config-network[4381]: chmod 0644 > //etc/sysconfig/networking/devices/ifcfg-eth1 > Mar 20 08:09:26 lorentz system-config-network[4381]: chmod 0644 > //etc/sysconfig/networking/devices/ifcfg-eth3 > Mar 20 08:09:46 lorentz ntpd[1765]: synchronized to 10.1.2.54, stratum 3 > Mar 20 09:16:39 lorentz system-config-network[4594]: chmod 0644 > //etc/sysconfig/networking/devices/ifcfg-eth1 > Mar 20 09:16:39 lorentz system-config-network[4594]: chmod 0644 > //etc/sysconfig/networking/devices/ifcfg-eth3 > Mar 20 09:17:07 lorentz kernel: lo: Disabled Privacy Extensions > Mar 20 09:17:07 lorentz kernel: e1000: eth1 NIC Link is Up 1000 Mbps Full > Duplex, Flow Control: None > Mar 20 09:17:07 lorentz kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready > Mar 20 09:17:07 lorentz kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes > ready > Mar 20 09:17:08 lorentz kernel: eth3: intr type 3, mode 0, 2 vectors allocated > Mar 20 09:17:08 lorentz kernel: eth3: NIC Link is Up 10000 Mbps > Mar 20 09:17:09 lorentz NET[4971]: /etc/sysconfig/network-scripts/ifup-post : > updated /etc/resolv.conf > Mar 20 09:17:12 lorentz ntpd[1765]: Listening on interface #16 eth3, > fe80::250:56ff:fe8a:45de#123 Enabled > Mar 20 09:17:12 lorentz ntpd[1765]: Listening on interface #17 eth3, > 10.1.10.68#123 Enabled > Mar 20 09:17:47 lorentz NET[5040]: /etc/sysconfig/network-scripts/ifdown-post > : updated /etc/resolv.conf > Mar 20 09:17:49 lorentz ntpd[1765]: Deleting interface #16 eth3, > fe80::250:56ff:fe8a:45de#123, interface stats: received=0, sent=0, dropped=0, > active_time=37 secs > Mar 20 09:17:49 lorentz ntpd[1765]: Deleting interface #17 eth3, > 10.1.10.68#123, interface stats: received=0, sent=0, dropped=0, > active_time=37 secs > Mar 20 09:18:12 lorentz kernel: lo: Disabled Privacy Extensions > Mar 20 09:18:12 lorentz kernel: e1000: eth1 NIC Link is Up 1000 Mbps Full > Duplex, Flow Control: None > Mar 20 09:18:12 lorentz kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready > Mar 20 09:18:12 lorentz kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes > ready > Mar 20 09:18:14 lorentz kernel: eth3: intr type 3, mode 0, 2 vectors allocated > Mar 20 09:18:14 lorentz kernel: eth3: NIC Link is Up 10000 Mbps > Mar 20 09:18:15 lorentz NET[5416]: /etc/sysconfig/network-scripts/ifup-post : > updated /etc/resolv.conf > Mar 20 09:18:17 lorentz ntpd[1765]: Listening on interface #18 eth3, > fe80::250:56ff:fe8a:45de#123 Enabled > Mar 20 09:18:17 lorentz ntpd[1765]: Listening on interface #19 eth3, > 10.1.10.68#123 Enabled > Mar 20 09:18:20 lorentz NET[5484]: /etc/sysconfig/network-scripts/ifdown-post > : updated /etc/resolv.conf > Mar 20 09:18:22 lorentz ntpd[1765]: Deleting interface #18 eth3, > fe80::250:56ff:fe8a:45de#123, interface stats: received=0, sent=0, dropped=0, > active_time=5 secs > Mar 20 09:18:22 lorentz ntpd[1765]: Deleting interface #19 eth3, > 10.1.10.68#123, interface stats: received=0, sent=0, dropped=0, active_time=5 > secs > Mar 20 09:18:44 lorentz kernel: lo: Disabled Privacy Extensions > Mar 20 09:18:44 lorentz kernel: e1000: eth1 NIC Link is Up 1000 Mbps Full > Duplex, Flow Control: None > Mar 20 09:18:45 lorentz ntpd[1765]: Deleting interface #12 eth1, > fe80::250:56ff:fe8a:d03c#123, interface stats: received=0, sent=0, dropped=0, > active_time=5096 secs > Mar 20 09:18:45 lorentz ntpd[1765]: Deleting interface #13 eth1, > 10.20.2.24#123, interface stats: received=57, sent=57, dropped=0, > active_time=5096 secs > Mar 20 09:18:47 lorentz ntpd[1765]: Listening on interface #20 eth1, > fe80::250:56ff:fe8a:d03c#123 Enabled > Mar 20 09:18:47 lorentz ntpd[1765]: Listening on interface #21 eth1, > 10.20.2.24#123 Enabled > > D EVICE= eth1 > HWADDR=00:50:56:8a:d0:3c > NM_CONTROLLED=no > ONBOOT=yes > IPADDR=10.20.2.24 > BOOTPROTO=none > NETMASK=255.255.0.0 > DNS2=10.1.2.54 > TYPE=Ethernet > GATEWAY=10.20.1.12 > DNS1=10.20.1.12 > IPV6INIT=no > USERCTL=no > ~ > > DNS1=10.1.1.1 > DEVICE=eth3 > BOOTPROTO=none > TYPE=Ethernet > HWADDR=00:50:56:8a:45:de > NM_CONTROLLED=no > ONBOOT=no > IPV6INIT=no > USERCTL=no > IPADDR=10.1.10.68 > NETMASK=255.255.0.0 > GATEWAY=10.1.1.1 > ~
No sera un problema de enrutamiento? Puedes mandar la salida de netstat -rn antes y después de configurar eth3? Y iptables? no creo ya que en principio no añadir otra ethernet no debería desconectar la primera, pero... Manda la salida de iptables -L -n antes y después de configurar eth3. Y ya de paso, manda también la salida de ifconfig -a antes y después de configurar eth3. > > Gracias por adelantado. > De nada. -- Francesc Guitart _______________________________________________ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es