On 9/26/18 2:51 PM, Mauricio Tavares wrote:
On Wed, Sep 26, 2018 at 3:37 PM, lejeczek via CentOS <centos@centos.org> wrote:
On 26/09/18 20:19, Mauricio Tavares wrote:
If ti makes you feel any better, I am not having stellar service from
WD's support. In fact, they act like they never received the HD I sent
for RMA whose tracking number says they did 10 days ago.
On Wed, Sep 26, 2018 at 2:16 PM, lejeczek via CentOS <centos@centos.org>
wrote:
hi guys
I have rather a large set of Seagate's SAS ST32000444SS, over a hundred -
experience I'm having from those in conjunction with their tech support
is
abysmal.
I'm trying to update firmware of these drives and nothing works,
including
tech support.
... and I cannot help but wonder - is just me who is so unlucky and
getting
very, very poor support(taking naturally only of Linux) or in fact
Seagate
are rubbish!
Care to share your say?
thanks, L.
_______________________________________________
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
what seems really really bad, is that none of the tools their tech support
suggest works, at least for me.
You would think that simple thing such as firmware update should be really a
piece of cake, but it seems that Seagate too, is rubbish when it come to
Linux.
One would think Seagate should not that mistake but, yet again, yet another
business which does not like Linux customers.
I do not think it is malice but just plain ignorance or the
famous "if it works, don't fix it" principle. Remember that even today
you can buy cars with without rear disk brakes. With that said, I
thought Seagate had a .iso to deploy the firmware. I could be wrong
though.
What I am saying is not intended to advocate for Seagate, they are not
even my first choice as hard drive manufacturer.
I for one am very conservative about updating/upgrading firmware of
trivial devices such as hard drive or system board ("motherboard"). What
specifically are you planning to achieve by doing that? Note that
firmware is extremely small hence very simple program which can be
easily debugged and for mass manufactured devices can be virtually clean
of bugs including ones with security implications.
That said, if firmware upgrade is necessary to fix real potential
trouble, I'd rather stop using that manufacturer in a future (no matter
whether their support is outstanding of doesn't exist). Other reasons
may be: performance improvement (but it's doubtful to achiever
significant improvement that way), or changing specs, like converting
500 byre to 4 kilobyte sector, which as far as I know is impossible.
Just a side note about quality of support:
I said once the following about one hardware manufacturer whose hardware
I recommended when was asked how good their support is: I use their
devices for over decade and a half, never had to contact their support.
Their devices keep working, during warranty and after that ends, some of
them as old as 15 years old...
Valeri
_______________________________________________
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
--
++++++++++++++++++++++++++++++++++++++++
Valeri Galtsev
Sr System Administrator
Department of Astronomy and Astrophysics
Kavli Institute for Cosmological Physics
University of Chicago
Phone: 773-702-4247
++++++++++++++++++++++++++++++++++++++++
_______________________________________________
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
