we have DELL R900 with CENTOS 5.3 in it. This DELL R900 come with one
integrate PERC6/I and two PERC6/E card. DELL 6/I control 5 internal disks.
The original disk sequence are:
/dev/sda1 /boot
/dev/sda2 /
/dev/sdb1 swap
...
after I configured PERC6/E disks and reboot, /dev/sda change to RAID disk and
original /boot and / change to /dev/sde1 and /dev/sde2.
My modprobe.conf is:
alias scsi_hostadapter megaraid_sas
alias scsi_hostadapter1 ata_piix
alias eth0 bnx2
alias eth0.1998 bnx2
alias eth1 bnx2
how to change sequence back?
Thanks.
______________________________________________________________________________________________________
付費才容量無上限？Yahoo!奇摩電子信箱2.0免費給你，信件永遠不必刪！ http://tw.mg0.mail.yahoo.com/dc/landing
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
