Niki Kovacs wrote:
------------------------------------------------------------------------
Subject:
Re: [CentOS] Getting started with NFS
From:
Niki Kovacs <cont...@kikinovak.net>
Date:
Sat, 04 Jul 2009 10:33:31 +0200
To:
Frank Cox <thea...@sasktel.net>
To:
Frank Cox <thea...@sasktel.net>
Frank Cox a écrit :
There isn't much to setting up a simple NFS fileserver and client
mount. Set
up /etc/exports on the server (this assumes your client is 192.168.0.3)
/whatever/where-ever/ 192.168.0.3(rw)
Start the nfs service. Create a mount point on the client
"mkdir /mnt/fileserver"
then mount the fileserver there.
"mount fileserver:/whatever/where-ever/ /mnt/fileserver"
That's about exactly what I did. I setup the NFS server on machine
'raymonde' (192.168.1.4) on my local network. Then when I do this from
another machine:
[r...@lifebook ~]# mount raymonde:/data /home/shares
Nothing happens for about a minute or so, and then I get the following
error:
mount.nfs: Input/output error
Which leaves me clueless.
Any idea what might go wrong here?
------------------------------------------------------------------------
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Niki,
nfs v2 and v3 are fairly simple, however I have not yet managed v4 as it
seem to need kerberos and individual user authentication rather than
machine authentication as do v2 & v3.
If you use a firewall on your server, you will need to set up permanent
ports for the various services that nfs uses. check out /etc/sysconfig/nfs
rpcinfo -p will show you what is running and what version and ports -
very useful!!
HTH
Rob
begin:vcard
fn:Rob Kampen
n:Kampen;Rob
email;internet:rkam...@kampensonline.com
tel;work:407-896-9556 x6344
tel;fax:407-896-7607
tel;home:407-876-4854
tel;cell:407-341-3815
version:2.1
end:vcard
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
