On 10/20/2010 02:13 PM, cen...@crighton.me.uk wrote:
On Wed, 20 Oct 2010 14:04:51 -0400, you wrote:
To get mine to work under fedora I had to run ethtool and turn on the
wol option.
Also it seemed to get reset after used wol to start it up so in my
rc.local I put
/sbin/ethtool -s eth1 wol g
/sbin/ethtool -s eth0 wol g
ethtool -s eth0 wol g results in a message "Cannot get current
wake-on-lan settings: Operation not supported" even though both the
motherboard and NIC do support WOL.
Hmm...
[r...@centostest ~]# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
[r...@centostest ~]# ethtool -s eth0 wol g
[r...@centostest ~]# uname -a
Linux centostest 2.6.18-164.6.1.el5 #1 SMP Tue Nov 3 16:18:27 EST 2009
i686 athlon i386 GNU/Linux
[r...@centostest ~]# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
Link detected: yes
[r...@centostest ~]#
--
Stephen Clark
*NetWolves*
Sr. Software Engineer III
Phone: 813-579-3200
Fax: 813-882-0209
Email: steve.cl...@netwolves.com
http://www.netwolves.com
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
