On Apr 21, 2011, at 4:28 PM, Adam Wead <amsterda...@gmail.com> wrote:
> Hi all, > > I have a Dell server running cent 5.6, new install, connecting to an IBM > DS3500. I have configured iscsi connections using iscsid and can log into > the targets on the IBM. I can also mount the LUNs when accessing them from > their active controller path. When I throw multipath into the mix, it fails > completely. Multipath is working, when I run multipath -ll it shows me the > correct active path and it is mapped to a device under /dev/mapper. However, > if I try to access the device from that path, no luck. A mount request just > hangs and eventually there's a kernel error message. > > I'm using the native rdac drivers that came with the OS. Anyone using > something similar? My guess is that it's either bad drivers, or a bad > multipath config. I started with the default, but after tweaking different > parameters, it's still not working. > > Any advice is greatly appreciated. Check the archives, there was someone who posted their multipathd config for an MD3000i a month ago which should be applicable (with a vendor/model name change). -Ross _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos