On 08/18/2011 11:10 AM, Helmut Drodofsky wrote:
To route a subnet in ipv6 there are two possibilities:
-add route commands for the subnet in each computer
-or use neighbor proxy in the router server
I prefer neighbor proxy.
So I have to activate neighbor proxy in the router:
sysctl -w net.ipv6.conf.all.proxy_ndp=1
and I have to add entries for each client in the subnet like
ip -6 neigh add proxy 2001:0:0:1:211:d8ff:fe97:3273 dev eth0
This works well but is lost on reboot.
For the sysctl command there is /etc/sysctl.conf for permanent configuration.
If I create a file route-eth0 in the directory /etc/sysconfig/network-scripts/
with the above ip neighbor command, the interface eth0 is immediately down.
Restart of network brings:
Bringing up interface eth0: Error: Unknown connection:
5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03.
[FAILED]
All Interfaces are NetworkManager controlled.
Ask for help:
-where can I store the command for a permanent configuration?
-Shall I not further use NetworkManager?
Thank you for help in advance
Helmut
I would never use NetworkManager on a server. It has never caused me anything
but problems.
My $.02
--
Stephen Clark
*NetWolves*
Sr. Software Engineer III
Phone: 813-579-3200
Fax: 813-882-0209
Email: steve.cl...@netwolves.com
http://www.netwolves.com
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
