Hi, I got into this on trying to boot a cat 6500 sup1/msfc2. I was working ok (testing fortunatly) and after a period of time beeing turned off when I turn it on it goes into rommon. The boot fails with this error.
Is it anything that can be done with it? tx, gheorghe *** Bus Error (Load) Exception *** Access address = 0xeefb4004 PC = 0x80005f60, Cause = 0x8000401c, Status Reg = 0x3041c003 ROM Monitor Can Not Recover From Exception A Board Reset Is Issued System Bootstrap, Version 12.1(3r)E2, RELEASE SOFTWARE (fc1) Copyright (c) 2000 by cisco Systems, Inc. Warning: Rommon NVRAM area is corrupted. Initialize the area to default environment checksum in NVRAM failed environment checksum in NVRAM failed ____________________________________________________________________________________ Get the Yahoo! toolbar and be alerted to new email wherever you're surfing. http://new.toolbar.yahoo.com/toolbar/features/mail/index.php _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/