Couldn't you use a VLAN? Maybe that's too much work since you're just testing though.... But VLANs divide broadcast/multicast domains...
Priscilla TP wrote: > > Dear Group, > > I need help about multiscast. > This is a simple topology... I've to test some video streamer > devices so I > must generate multicast traffic. > All video devices are connected to a catalyst 3550xl. > We can reach the office LAN through the same catalyst, in > particular from/by > fastethernet0/1. > > I must avoid that multicast traffic genereted locally floods > the LAN creating > excessive traffic. > Can I achieve this? > > This is the configuration runnig...it doesn't work. I mean > when I generate > multicast traffic it crosses fe0/1 and reachs the rest of the > LAN > degrading network performance. > > Any help will be appreciated. > Thank you. > Teresa > > > interface FastEthernet0/1 > switchport protected > switchport block multicast > no ip address > storm-control multicast level 20.00 > > System image file is > "flash:c3550-i9q3l2-mz.121-11.EA1/c3550-i9q3l2-mz.121-11.EA > 1.bin" > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71877&t=71820 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]