Thanks Kim.
I had read figured out what I needed to do after a few trial and errors. I appreciate you and all who replied to my post. Happy 4th. Mario -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kim Graham Sent: Friday, July 04, 2003 6:35 PM To: [EMAIL PROTECTED] Subject: RE: Priviledge Level Commands [7:71694] Mario, The following may help you out. I found them by searching Cisco with "privilege level configuration" http://www.cisco.com/en/US/customer/tech/tk583/tk547/technologies_tech_n ote09186a008009465c.shtml Remember if you do not give them the privilege level to the configuration command then they will not see the command output in the configuration. http://www.cisco.com/en/US/customer/tech/tk583/tk642/technologies_tech_n ote09186a00800949d5.shtml Kim Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71927&t=71694 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]