these links would be helpfull to u: http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca774.html
http://www.cisco.com/en/US/tech/tk713/tk507/technologies_tech_note09186a0080094862.shtml http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087ae8.html as for ur first question about the lines, i'm not sure i got what u mean ""H T"" a icrit dans le message de news:[EMAIL PROTECTED] > Hi all, > > To bring back the physical interface to it is default we use " default > interface type number " global config mode.... > > The question is how we bring back the default sting for the > > Router#sho line > yp Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int > * 0 CTY - - - - - 0 0 > 0 - > 65 AUX 9600/9600 - - - - - 0 0 > 0 - > * 66 VTY - - - - - 1 0 > 0 - > * 67 VTY - - - - - 1 0 > 0 - > 68 VTY - - - - - 0 0 > 0 - > 69 VTY - - - - - 0 0 > 0 - > 70 VTY - - - - - 0 0 > 0 - > > > > How to make use of the following virtual interfaces? > Virtual-Access > Virtual-FrameRelay > Virtual-Template > Virtual-TokenRing > > > > > Good luck :) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72117&t=72095 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]