hello, hello,
i tried to upgrade a 1710 box and i got the "SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!" message. no wi'm trying to go back to the old version which was loaded on the box but i keep getting the same message. here you have some output info from the box - maybe you can come with a new idea - i tried tftpdnld, xmodem ... and so on... thx. rommon 1 > rommon 1 > rommon 1 > rommon 1 > dir flash: File size Checksum File name 6484004 bytes (0x62f024) 0x3014 c1710-k9o3sy-mz.122-4.YA2.bin rommon 2 > rommon 2 > rommon 2 > rommon 2 > rommon 2 > confreg Configuration Summary (Virtual Configuration Register: 0x2142) enabled are: load rom after netboot fails ignore system config info console baud: 9600 boot: image specified by the boot system commands or default to: cisco2-C1700 do you wish to change the configuration? y/n [n]: y enable "diagnostic mode"? y/n [n]: y enable "use net in IP bcast address"? y/n [n]: n disable "load rom after netboot fails"? y/n [n]: y enable "use all zero broadcast"? y/n [n]: y enable "break/abort has effect"? y/n [n]: y disable "ignore system config info"? y/n [n]: y change console baud rate? y/n [n]: y enter rate: 0 = 9600, 1 = 4800, 2 = 1200, 3 = 2400 4 = 19200, 5 = 38400, 6 = 57600, 7 = 115200 [0]: 7 change the boot characteristics? y/n [n]: y enter to boot: 0 = ROM Monitor 1 = the boot helper image 2-15 = boot system [2]: Configuration Summary (Virtual Configuration Register: 0x9c22) enabled are: diagnostic mode use all zero broadcast break/abort has effect console baud: 115200 boot: image specified by the boot system commands or default to: cisco2-C1700 do you wish to change the configuration? y/n [n]: y disable "diagnostic mode"? y/n [n]: C1700 platform with 32768 Kbytes of main m emory program load complete, entry point: 0x80008000, size: 0x62ef08 Self decompressing the image : ################################################# ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ########################################################################## [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1710-K9O3SY-M), Version 12.2(4)YA2, EARLY DEPLOYMENT R ELEASE SOFTWARE (fc1) Synched to technology version 12.2(5.4)T TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Thu 11-Apr-02 22:18 by ealyon Image text-base: 0x80008124, data-base: 0x80BED550 SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE! System Bootstrap, Version 12.2(1r)XE1, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support Copyright (c) 2001 by cisco Systems, Inc. C1700 platform with 32768 K *** Reserved LVL 7 Interrupt *** PC = 0xfff0bc98, Vector = 0x500, SP = 0x80004ce4 bytes of main memory monitor: command "boot" aborted due to user interrupt rommon 1 > *** Reserved LVL 7 Interrupt *** PC = 0xfff0bcb4, Vector = 0x500, SP = 0x80004de4 rommon 1 > rommon 1 > *** Reserved LVL 7 Interrupt *** PC = 0xfff0bcb4, Vector = 0x500, SP = 0x80004de4 *** Reserved LVL 7 Interrupt *** PC = 0xfff0bcb4, Vector = 0x500, SP = 0x80004de4 rommon 1 > rommon 1 > rommon 1 > rommon 1 > rommon 1 > rommon 1 > rommon 1 > rommon 1 > confreg Configuration Summary (Virtual Configuration Register: 0x2142) enabled are: load rom after netboot fails ignore system config info console baud: 9600 boot: image specified by the boot system commands or default to: cisco2-C1700 do you wish to change the configuration? y/n [n]: y enable "diagnostic mode"? y/n [n]: y enable "use net in IP bcast address"? y/n [n]: y disable "load rom after netboot fails"? y/n [n]: y enable "use all zero broadcast"? y/n [n]: y enable "break/abort has effect"? y/n [n]: y disable "ignore system config info"? y/n [n]: y change console baud rate? y/n [n]: y enter rate: 0 = 9600, 1 = 4800, 2 = 1200, 3 = 2400 4 = 19200, 5 = 38400, 6 = 57600, 7 = 115200 [0]: 7 change the boot characteristics? y/n [n]: y enter to boot: 0 = ROM Monitor 1 = the boot helper image 2-15 = boot system [2]: 0 Configuration Summary (Virtual Configuration Register: 0xdc20) enabled are: diagnostic mode use net in IP bcast address use all zero broadcast break/abort has effect console baud: 115200 boot: the ROM Monitor do you wish to change the configuration? y/n [n]: n You must reset or power cycle for new config to take effect rommon 2 > reset l D|wE| rommon 1 > rommon 1 > rommon 1 > rommon 1 > rommon 1 > rommon 1 > rommon 1 > rommon 1 > xmodem usage: xmodem [-cyrx] -c CRC-16 -y ymodem-batch protocol -r copy image to dram for launch -x do not launch on download completion rommon 2 > BB0BB0xmodem monitor: command "BB0BB0xmodem" not found rommon 3 > rommon 3 > rommon 3 > rommon 3 > rommon 3 > xmodem c1710-k9o3sy-mz.122-4.YA2.bin Do not start the sending program yet... File size Checksum File name 6484004 bytes (0x62f024) 0x3014 c1710-k9o3sy-mz.122-4.YA2.bin WARNING: All existing data in bootflash will be lost! Invoke this application only for disaster recovery. Do you wish to continue? y/n [n]: y Ready to receive file c1710-k9o3sy-mz.122-4.YA2.bin ... Erasing flash at 0x60fe0000 Programming location 60620000 Download Complete! program load complete, entry point: 0x80008000, size: 0x62ef08 Stack pointer : 0x02000000 monstack : 0x800063EC monra : 0x00000000 edata : 0x8000C0D0 magic : 0xFEEDFACE memsize : 0x02000000 uncomp_size : 0x010C1440 comp_size : 0x0062AE22 comp_checksum : 0xDAFC8EC9 uncomp_checksum : 0x78D1F2EE Self decompressing the image : ################################################# ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ########################################################################## [OK] Source elf_hdr->e_shnum = 0x0000000A Setting up to copy ELF section 0x00000001 to image_info section 0x00000000 sh_name = 0x0000001B sh_type = 0x00000001 sh_flags = 0x00000006 sh_addr = 0x80008000 sh_offset = 0x00000060 sh_size = 0x00BE5550 sh_link = 0x00000000 sh_info = 0x00000000 sh_addralign = 0x00000020 sh_entsize = 0x00000000 Setting up to copy ELF section 0x00000002 to image_info section 0x00000001 sh_name = 0x00000021 sh_type = 0x00000001 sh_flags = 0x00000002 sh_addr = 0x80BED550 sh_offset = 0x00BE55B0 sh_size = 0x003599E0 sh_link = 0x00000000 sh_info = 0x00000000 sh_addralign = 0x00000008 sh_entsize = 0x00000000 Setting up to copy ELF section 0x00000004 to image_info section 0x00000002 sh_name = 0x00000031 sh_type = 0x00000001 sh_flags = 0x00000003 sh_addr = 0x80F46F30 sh_offset = 0x00F3EF90 sh_size = 0x00181FF0 sh_link = 0x00000000 sh_info = 0x00000000 sh_addralign = 0x00000008 sh_entsize = 0x00000000 Setting up to copy ELF section 0x00000005 to image_info section 0x00000003 sh_name = 0x00000037 sh_type = 0x00000001 sh_flags = 0x00000003 sh_addr = 0x810C8F20 sh_offset = 0x010C0F80 sh_size = 0x00000010 sh_link = 0x00000000 sh_info = 0x00000000 sh_addralign = 0x00000004 sh_entsize = 0x00000004 Setting up to copy ELF section 0x00000006 to image_info section 0x00000004 sh_name = 0x0000003C sh_type = 0x00000001 sh_flags = 0x00000003 sh_addr = 0x810C8F30 sh_offset = 0x010C0F90 sh_size = 0x000002CC sh_link = 0x00000000 sh_info = 0x00000000 sh_addralign = 0x00000004 sh_entsize = 0x00000000 cpu type : 0x00000033 uncomp_size : 0x010C1440 monstack : 0x800063EC image_info.entry_point = 0x80008000 image_info.section_count = 0x00000005 image_info.monstack = 0x800063EC image_info.monra = 0x00000000 image_info.param0 = 0x00000002 image_info.param1 = 0x00000000 image_info.param2 = 0x00000000 image_info.param3 = 0x00000000 Section Index = 0x00000000 source = 0x800346BC dest = 0x80008000 bytes = 0x00BE5550 Section Index = 0x00000001 source = 0x80C19C0C dest = 0x80BED550 bytes = 0x003599E0 Section Index = 0x00000002 source = 0x80F735EC dest = 0x80F46F30 bytes = 0x00181FF0 Section Index = 0x00000003 source = 0x810F55DC dest = 0x810C8F20 bytes = 0x00000010 Section Index = 0x00000004 source = 0x810F55EC dest = 0x810C8F30 bytes = 0x000002CC Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1710-K9O3SY-M), Version 12.2(4)YA2, EARLY DEPLOYMENT R ELEASE SOFTWARE (fc1) Synched to technology version 12.2(5.4)T TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Thu 11-Apr-02 22:18 by ealyon Image text-base: 0x80008124, data-base: 0x80BED550 SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE! System Bootstrap, Version 12.2(1r)XE1, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support Copyright (c) 2001 by cisco Systems, Inc. Testing lower main memory - data equals address Testing lower main memory - checkerboard Testing lower main memory - inverse checkerboard Clearing lower 4K memory for cache initialization Clearing bss Reading monitor variables from NVRAM Enabling interrupts Enabling instruction cache Reading cookie Initializing main memory Sizing NVRAM Sizing flash Exiting init C1700 platform with 32768 Kbytes of main memory ---------------------------------------------------------------------------- --------- rommon 1 > dir flash: File size Checksum File name 6484004 bytes (0x62f024) 0x3014 c1710-k9o3sy-mz.122-4.YA2.bin rommon 2 > boot flash:c1710-k9o3sy-mz.122-4.YA2.bin program load complete, entry point: 0x80008000, size: 0x62ef08 Stack pointer : 0x02000000 monstack : 0x800063EC monra : 0x00000000 edata : 0x8000C0D0 magic : 0xFEEDFACE memsize : 0x02000000 uncomp_size : 0x010C1440 comp_size : 0x0062AE22 comp_checksum : 0xDAFC8EC9 uncomp_checksum : 0x78D1F2EE Self decompressing the image : ################################################# ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ############################################################################ #### ########################################################################## [OK] Source elf_hdr->e_shnum = 0x0000000A Setting up to copy ELF section 0x00000001 to image_info section 0x00000000 sh_name = 0x0000001B sh_type = 0x00000001 sh_flags = 0x00000006 sh_addr = 0x80008000 sh_offset = 0x00000060 sh_size = 0x00BE5550 sh_link = 0x00000000 sh_info = 0x00000000 sh_addralign = 0x00000020 sh_entsize = 0x00000000 Setting up to copy ELF section 0x00000002 to image_info section 0x00000001 sh_name = 0x00000021 sh_type = 0x00000001 sh_flags = 0x00000002 sh_addr = 0x80BED550 sh_offset = 0x00BE55B0 sh_size = 0x003599E0 sh_link = 0x00000000 sh_info = 0x00000000 sh_addralign = 0x00000008 sh_entsize = 0x00000000 Setting up to copy ELF section 0x00000004 to image_info section 0x00000002 sh_name = 0x00000031 sh_type = 0x00000001 sh_flags = 0x00000003 sh_addr = 0x80F46F30 sh_offset = 0x00F3EF90 sh_size = 0x00181FF0 sh_link = 0x00000000 sh_info = 0x00000000 sh_addralign = 0x00000008 sh_entsize = 0x00000000 Setting up to copy ELF section 0x00000005 to image_info section 0x00000003 sh_name = 0x00000037 sh_type = 0x00000001 sh_flags = 0x00000003 sh_addr = 0x810C8F20 sh_offset = 0x010C0F80 sh_size = 0x00000010 sh_link = 0x00000000 sh_info = 0x00000000 sh_addralign = 0x00000004 sh_entsize = 0x00000004 Setting up to copy ELF section 0x00000006 to image_info section 0x00000004 sh_name = 0x0000003C sh_type = 0x00000001 sh_flags = 0x00000003 sh_addr = 0x810C8F30 sh_offset = 0x010C0F90 sh_size = 0x000002CC sh_link = 0x00000000 sh_info = 0x00000000 sh_addralign = 0x00000004 sh_entsize = 0x00000000 cpu type : 0x00000033 uncomp_size : 0x010C1440 monstack : 0x800063EC image_info.entry_point = 0x80008000 image_info.section_count = 0x00000005 image_info.monstack = 0x800063EC image_info.monra = 0x00000000 image_info.param0 = 0x00000002 image_info.param1 = 0x00000000 image_info.param2 = 0x00000000 image_info.param3 = 0x00000000 Section Index = 0x00000000 source = 0x800346BC dest = 0x80008000 bytes = 0x00BE5550 Section Index = 0x00000001 source = 0x80C19C0C dest = 0x80BED550 bytes = 0x003599E0 Section Index = 0x00000002 source = 0x80F735EC dest = 0x80F46F30 bytes = 0x00181FF0 Section Index = 0x00000003 source = 0x810F55DC dest = 0x810C8F20 bytes = 0x00000010 Section Index = 0x00000004 source = 0x810F55EC dest = 0x810C8F30 bytes = 0x000002CC Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1710-K9O3SY-M), Version 12.2(4)YA2, EARLY DEPLOYMENT R ELEASE SOFTWARE (fc1) Synched to technology version 12.2(5.4)T TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Thu 11-Apr-02 22:18 by ealyon Image text-base: 0x80008124, data-base: 0x80BED550 SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE! System Bootstrap, Version 12.2(1r)XE1, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support Copyright (c) 2001 by cisco Systems, Inc. Testing lower main memory - data equals address Testing lower main memory - checkerboard Testing lower main memory - inverse checkerboard Clearing lower 4K memory for cache initialization Clearing bss Reading monitor variables from NVRAM Enabling interrupts Enabling instruction cache Reading cookie Initializing main memory Sizing NVRAM Sizing flash Exiting init C1700 platform with 32768 Kbytes of main memory rommon 1 > rommon 1 > meminfo Main memory size: 32 MB. Available main memory starts at 0x10000, size 32704KB IO (packet) memory size: 5 percent of main memory. NVRAM size: 32KB rommon 2 > set Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52677&t=52677 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
