Here's a doc that covers the config register by bit. Keep in mind that the bits are numbered right to left starting with zero at the rightmost. Watch the wrap. http://cco-rtp-1.cisco.com/en/US/products/hw/routers/ps282/products_installa tion_guide_chapter09186a008007dfd0.html
So 0x2132. The "3" covers bits number 4 and 5. Four is not significant. If "5" is set then the console speed is 19200. See also (watch the wrap) http://www.cisco.com/en/US/products/hw/routers/ps259/products_installation_g uide_chapter09186a008007e02e.html Tells how to change console speed settings from the rommon prompt. > -----Original Message----- > From: Munit Singla [mailto:[EMAIL PROTECTED]] > Sent: Thursday, December 19, 2002 3:07 PM > To: [EMAIL PROTECTED] > Subject: Re: confreg 0x2132 instead of confreg 0x2142 [7:59549] > > > Ted great, > can u refer me doc for this settings and speed regarding this > I couldn't find > Regards, > Munit. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59562&t=59549 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
