What version of CMake are you using? All the modern pre-built CMake
installations should support https without extra effort on your part. Are
you using a pre-built version from somewhere or are you building CMake
yourself?


On Saturday, April 18, 2015, Cedric Doucet <cedric.dou...@inria.fr> wrote:

>
> Ok it seems the answer to my problem is here:
> http://www.cmake.org/pipermail/cmake/2010-December/041295.html
> I will try it.
>
> ----- Mail original -----
> > De: "Cedric Doucet" <cedric.dou...@inria.fr <javascript:;>>
> > À: cmake@cmake.org <javascript:;>
> > Envoyé: Samedi 18 Avril 2015 13:38:31
> > Objet: Re: [CMake] Don't download external projects again after calling
> "make clean"
> >
> >
> > I have just tried to install curl to get https support.
> > To do that, I have followed the steps below:
> >
> > 1. Installation of openssl:
> >   1.a. ./config --prefix=/my/openssl/path
> >   1.b. make
> >   1.c. make test
> >   1.d. make install
> > 2. Installation of curl
> >   2.a. ./configure --prefix=/my/curl/path --with-ssl=/my/openssl/path/lib
> >   2.b. make
> >   2.c. make install
> >
> > I have also prepend PATH with /my/curl/path/bin.
> > However, the error remains.
> > It seems that my version of curl (7.41.0) is not taken into acount
> because I
> > have still this line in the error message:
> > User-Agent: curl/7.38.0
> > I tried to remove all previous of curl and libcurl but it does not change
> > anything.
> >
> > Could you help me?
> >
> > Cédric
> >
> >
> > ----- Mail original -----
> > > De: "Cedric Doucet" <cedric.dou...@inria.fr <javascript:;>>
> > > À: "David Cole" <dlrd...@aol.com <javascript:;>>
> > > Cc: cmake@cmake.org <javascript:;>
> > > Envoyé: Samedi 18 Avril 2015 13:00:28
> > > Objet: Re: [CMake] Don't download external projects again after calling
> > > "make clean"
> > >
> > >
> > > Hello David,
> > >
> > > thank you very much.
> > > Unfortunately, I get the following error message if I remove my
> download
> > > command:
> > >
> > > -- downloading...
> > >      src='http://bitbucket.org/eigen/eigen/get/3.2.4.tar.gz'
> > >      dst='/home/cdoucet/Downloads/eigen/download/3.2.4.tar.gz'
> > >      timeout='none'
> > > -- [download 100% complete]
> > > CMake Error at src/eigen-stamp/download-eigen.cmake:27 (message):
> > >   error: downloading '
> http://bitbucket.org/eigen/eigen/get/3.2.4.tar.gz'
> > >   failed
> > >
> > >     status_code: 1
> > >     status_string: "Unsupported protocol"
> > >     log: Hostname was NOT found in DNS cache
> > >     Trying 131.103.20.167...
> > >
> > >   Connected to bitbucket.org (131.103.20.167) port 80 (#0)
> > >
> > >   GET /eigen/eigen/get/3.2.4.tar.gz HTTP/1.1
> > >
> > >   User-Agent: curl/7.38.0
> > >
> > >   Host: bitbucket.org
> > >
> > >   Accept: */*
> > >
> > >
> > >
> > >   HTTP/1.1 301 Moved Permanently
> > >
> > >   Server nginx/1.6.2 is not blacklisted
> > >
> > >   Server: nginx/1.6.2
> > >
> > >   Date: Sat, 18 Apr 2015 10:55:20 GMT
> > >
> > >   Content-Type: text/html
> > >
> > >   Content-Length: 184
> > >
> > >   Location: https://bitbucket.org/eigen/eigen/get/3.2.4.tar.gz
> > >
> > >
> > >
> > >   Ignoring the response-body
> > >
> > >   <html>
> > >
> > >   <head><title>301 Moved Permanently</title></head>
> > >
> > >   <body bgcolor="white">
> > >
> > >   <center><h1>301 Moved Permanently</h1></center>
> > >
> > >   <hr><center>nginx/1.6.2</center>
> > >
> > >   </body>
> > >
> > >   </html>
> > >
> > >   Connection #0 to host bitbucket.org left intact
> > >
> > >   Issue another request to this URL:
> > >   'https://bitbucket.org/eigen/eigen/get/3.2.4.tar.gz'
> > >
> > >   Protocol "https" not supported or disabled in libcurl
> > >
> > >   Closing connection -1
> > >
> > >
> > >
> > >
> > > ----- Mail original -----
> > > > De: "David Cole" <dlrd...@aol.com <javascript:;>>
> > > > À: "Cedric Doucet" <cedric.dou...@inria.fr <javascript:;>>
> > > > Cc: cmake@cmake.org <javascript:;>
> > > > Envoyé: Vendredi 17 Avril 2015 13:21:08
> > > > Objet: Re: [CMake] Don't download external projects again after
> calling
> > > > "make clean"
> > > >
> > > > Eliminate your DOWNLOAD_COMMAND. CMake knows how to do it with just
> > > > the URL_MD5, DOWNLOAD_DIR and SOURCE_DIR information....
> > > >
> > > > HTH,
> > > > David
> > > >
> > > >
> > > > On Fri, Apr 17, 2015 at 1:32 AM, Cedric Doucet <
> cedric.dou...@inria.fr <javascript:;>>
> > > > wrote:
> > > > >
> > > > > Hello David,
> > > > >
> > > > > thank you very much for your help.
> > > > >
> > > > > Unfortunately I may do something wrong because it does not work.
> > > > > After cleaning, the library is downloaded again.
> > > > >
> > > > > I guess my mistake comes from the fact I do not understand the
> role of
> > > > > URL_MD5.
> > > > > Below is a simple example where downloading and installing is very
> > > > > fast.
> > > > > You just have to replace the value of EXTERNAL_DIR by the path to
> your
> > > > > own
> > > > > "Downloads" repository.
> > > > > I tried to put URL in my DOWNLOAD_COMMAND but the call "wget <URL>"
> > > > > does
> > > > > not seem to be understood by the wget command.
> > > > >
> > > > > Thanks again!
> > > > >
> > > > > Cédric
> > > > >
> > > > >
> --------------------------------------------------------------------------
> > > > > cmake_minimum_required (VERSION 2.6)
> > > > >
> > > > > project (example CXX)
> > > > >
> > > > > set(CMAKE_VERBOSE_MAKEFILE ON)
> > > > >
> > > > > include(ProcessorCount)
> > > > > ProcessorCount(N)
> > > > > if(NOT N EQUAL 0)
> > > > >   set(CMAKE_BUILD_FLAGS -j${N})
> > > > > endif()
> > > > >
> > > > > include(ExternalProject)
> > > > > set(EXTERNAL_DIR /home/cdoucet/Downloads)
> > > > > ExternalProject_Add(eigen
> > > > >                     PREFIX ${EXTERNAL_DIR}/eigen
> > > > >                     DOWNLOAD_DIR ${EXTERNAL_DIR}/eigen/download
> > > > >                     SOURCE_DIR ${EXTERNAL_DIR}/eigen/src
> > > > >                     BINARY_DIR ${EXTERNAL_DIR}/eigen/build
> > > > >                     INSTALL_DIR ${EXTERNAL_DIR}/eigen/install
> > > > >                     URL
> > > > >
> http://bitbucket.org/eigen/eigen/get/3.2.4.tar.gz
> > > > >                     URL_MD5 ccb18a771f678b38a3d33c321a8e7daf
> > > > >                     DOWNLOAD_COMMAND wget
> > > > >
> http://bitbucket.org/eigen/eigen/get/3.2.4.tar.gz
> > > > >                     &&
> > > > >                     tar xvzf 3.2.4.tar.gz -C <SOURCE_DIR>
> > > > >                     --strip-components=1
> > > > >                     CONFIGURE_COMMAND cd <BINARY_DIR> && cmake -D
> > > > >                     CMAKE_INSTALL_PREFIX=$<INSTALL_DIR>
> <SOURCE_DIR>
> > > > >                    )
> > > > >
> ------------------------------------------------------------------------------
> > > > >
> > > > >
> > > > >
> > > > > ----- Mail original -----
> > > > >> De: "David Cole" <dlrd...@aol.com <javascript:;>>
> > > > >> À: "Cedric Doucet" <cedric.dou...@inria.fr <javascript:;>>
> > > > >> Cc: cmake@cmake.org <javascript:;>
> > > > >> Envoyé: Lundi 13 Avril 2015 12:40:34
> > > > >> Objet: Re: [CMake] Don't download external projects again after
> > > > >> calling
> > > > >> "make clean"
> > > > >>
> > > > >> Use the URL_MD5 and DOWNLOAD_DIR arguments to ExternalProject_Add
> to
> > > > >> put the downloaded files into a location outside the build tree
> > > > >> (perhaps ~/Downloads on Mac/Linux or $ENV{USERPROFILE}/Downloads
> on
> > > > >> Windows).
> > > > >>
> > > > >> With DOWNLOAD_DIR outside the build tree, and the checksums of the
> > > > >> downloaded files being the same as you've specified via URL_MD5,
> the
> > > > >> download portion will be avoided once there is a local copy of a
> file
> > > > >> available.
> > > > >>
> > > > >>
> > > > >> HTH,
> > > > >> David C.
> > > > >>
> > > > >>
> > > > >> On Mon, Apr 13, 2015 at 5:04 AM, Cedric Doucet
> > > > >> <cedric.dou...@inria.fr <javascript:;>>
> > > > >> wrote:
> > > > >> >
> > > > >> > Hello!
> > > > >> >
> > > > >> > I use the ExternalProject_Add function to download third-party
> > > > >> > libraries
> > > > >> > of
> > > > >> > a code.
> > > > >> >
> > > > >> > Once a library has been downloaded, I can call "make" as many
> times
> > > > >> > as
> > > > >> > I
> > > > >> > want without downloading this library again.
> > > > >> > It seems that CMake detects that the library has already been
> > > > >> > downloaded.
> > > > >> >
> > > > >> > However, calling "make clean" seems to destroy this feature.
> > > > >> > Even if my library is not uninstalled during cleaning, calling
> > > > >> > "make"
> > > > >> > after
> > > > >> > "make clean" will lead CMake to try download the library again.
> > > > >> >
> > > > >> > How could I tell CMake not to download the library again?
> > > > >> >
> > > > >> > Thank you very much for your help!
> > > > >> >
> > > > >> > Cédric
> > > > >> >
> > > > >> > --
> > > > >> >
> > > > >> > Powered by www.kitware.com
> > > > >> >
> > > > >> > Please keep messages on-topic and check the CMake FAQ at:
> > > > >> > http://www.cmake.org/Wiki/CMake_FAQ
> > > > >> >
> > > > >> > Kitware offers various services to support the CMake community.
> For
> > > > >> > more
> > > > >> > information on each offering, please visit:
> > > > >> >
> > > > >> > CMake Support: http://cmake.org/cmake/help/support.html
> > > > >> > CMake Consulting: http://cmake.org/cmake/help/consulting.html
> > > > >> > CMake Training Courses:
> http://cmake.org/cmake/help/training.html
> > > > >> >
> > > > >> > Visit other Kitware open-source projects at
> > > > >> > http://www.kitware.com/opensource/opensource.html
> > > > >> >
> > > > >> > Follow this link to subscribe/unsubscribe:
> > > > >> > http://public.kitware.com/mailman/listinfo/cmake
> > > > >>
> > > >
> > > --
> > >
> > > Powered by www.kitware.com
> > >
> > > Please keep messages on-topic and check the CMake FAQ at:
> > > http://www.cmake.org/Wiki/CMake_FAQ
> > >
> > > Kitware offers various services to support the CMake community. For
> more
> > > information on each offering, please visit:
> > >
> > > CMake Support: http://cmake.org/cmake/help/support.html
> > > CMake Consulting: http://cmake.org/cmake/help/consulting.html
> > > CMake Training Courses: http://cmake.org/cmake/help/training.html
> > >
> > > Visit other Kitware open-source projects at
> > > http://www.kitware.com/opensource/opensource.html
> > >
> > > Follow this link to subscribe/unsubscribe:
> > > http://public.kitware.com/mailman/listinfo/cmake
> > >
> > --
> >
> > Powered by www.kitware.com
> >
> > Please keep messages on-topic and check the CMake FAQ at:
> > http://www.cmake.org/Wiki/CMake_FAQ
> >
> > Kitware offers various services to support the CMake community. For more
> > information on each offering, please visit:
> >
> > CMake Support: http://cmake.org/cmake/help/support.html
> > CMake Consulting: http://cmake.org/cmake/help/consulting.html
> > CMake Training Courses: http://cmake.org/cmake/help/training.html
> >
> > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> >
> > Follow this link to subscribe/unsubscribe:
> > http://public.kitware.com/mailman/listinfo/cmake
> >
> --
>
> Powered by www.kitware.com
>
> Please keep messages on-topic and check the CMake FAQ at:
> http://www.cmake.org/Wiki/CMake_FAQ
>
> Kitware offers various services to support the CMake community. For more
> information on each offering, please visit:
>
> CMake Support: http://cmake.org/cmake/help/support.html
> CMake Consulting: http://cmake.org/cmake/help/consulting.html
> CMake Training Courses: http://cmake.org/cmake/help/training.html
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Follow this link to subscribe/unsubscribe:
> http://public.kitware.com/mailman/listinfo/cmake
>
-- 

Powered by www.kitware.com

Please keep messages on-topic and check the CMake FAQ at: 
http://www.cmake.org/Wiki/CMake_FAQ

Kitware offers various services to support the CMake community. For more 
information on each offering, please visit:

CMake Support: http://cmake.org/cmake/help/support.html
CMake Consulting: http://cmake.org/cmake/help/consulting.html
CMake Training Courses: http://cmake.org/cmake/help/training.html

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/cmake

Reply via email to