jos wrote: > Hello, > > Being new here I have to say sorry for my English! > > My question is: > > I have been trying to flash the bootloader on my new FR, this is what I > did: > > debian:/home/jos/neo# ./dfu-util -a u-boot -R -D > qi-s3c2442-master_2ad3ce6ff57753e3.udfu > dfu-util - (C) 2007 by OpenMoko Inc. > This program is Free Software and has ABSOLUTELY NO WARRANTY > > Opening USB Device 0x0000:0x0000... > Claiming USB DFU Runtime Interface... > Determining device status: state = appIDLE, status = 0 > Device really in Runtime Mode, send DFU detach request... > Resetting USB... > Opening USB Device... > Found Runtime: [0x1d50:0x5119] devnum=34, cfg=0, intf=0, alt=1, > name="u-boot" > Claiming USB DFU Interface... > Setting Alternate Setting ... > Determining device status: state = dfuIDLE, status = 0 > dfuIDLE, continuing > Transfer Size = 0x1000 > bytes_per_hash=540 > Starting download: [##################################################] > finished! > state(2) = dfuIDLE, status(0) = No error condition is present > Done! > Resetting USB to switch back to runtime mode > debian:/home/jos/neo# > > Looks good !? > > After power down (battery taken out) restarting with aux and power > button I get the same screen with menu as before, is this correct? > How can I see that Qi now is beeing used (and not uboot?)
i flashed exactly the same bootloader and it works fine (faster) when you want to flash press aux and power on (bahviour is as before) RTFM J _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community