On Wed, Aug 12, 2009 at 12:56:26PM +0400, Paul Fertser wrote: > Bernhard Reiter <ock...@raz.or.at> writes: > > Am Dienstag, den 11.08.2009, 10:41 +0400 schrieb Paul Fertser: > >> Please try wpa_supplicant method as described on FSO_Resources > >> wikipage and report the results. > > > > ok, using fsoraw it seems to connect to the router (only the important > > part given here): > > > > CTRL-EVENT-SCAN-RESULTS > > Trying to associate with <mac address> (SSID='<SSID>' freq=2437 MHz) > > Associated with <mac address> > > WPA: Key negotiation completed with <mac address> [PTK=CCMP GTK=TKIP] > > CTRL-EVENT-CONNECTED - Connection to <mac address> completed (auth) > > [id=0 id_str=] > > > > But unfortunately, I still can't ping my router, nor can I ping the > > FreeRunner from my laptop either. > > You're supposed to somehow set IP for eth0 after that (usually with > the help of DHCP client). I really wonder why it's not obvious :S
You're also supposed to have an SSID setup before using a DHCP client. At least for me that NEVER happens :| > Also some APs require "wmiconfig -ieth0 --power=maxperf" trick to > work. I always run that. Rui -- _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community