Workaround to add a delay: setup another fake device and choose it in
"Setup Watch TV" where you need delay.
It's clear, delay duration depends of device you choose...
Demetrio
2013/7/23 Scott Talbert <s...@techie.net>
> On Mon, 22 Jul 2013, Sancho wrote:
>
> > There are a few specialties about my currently configured devices, which
> I
> > should explain:
> > - the Sony TV (KDL-40L4000 is programmed twice, once on the TV button and
> > once on the AUX button. Prupose of this was to have the Sat Receiver be
> > powered on before the TV, and the AUX button was available for that, as I
> > have only 3 distinct devices to control (TV, Sat and DVD)
> > - I have already called Logitech support to ask for help with my problem
> of
> > getting a delay of about 5 seconds between the PowerToggle commands of
> Sat
> > and TV (as programmed on AUX). They have changed the "WatchTV" activity
> on
> > their server and I was supposed to get theit changes when I sync my
> remote
> > with the profile. However their changes did not solve my problem and
> there
> > was still no large enough delay between the PowerToggle commands. My
> current
> > suspicion is that they have increase the PowerOnDelay, but I thing what
> > would have been realy needed to achieve wat I want would have been to
> > incrase the InterDeviceDelay.
> > What do you think?
>
> OK, I pushed a change (to the harmony_link branch) that should fix the
> exception that you were getting when you clicked the "Setup Watch TV"
> button.
>
> As to your other issue of wanting to add a delay between PowerToggle
> commands - that is very similar to what Demetrio is looking to do. At
> this point, I am not sure how to do it, but I will keep investigating. It
> is possible it might be the InterDeviceDelay, but I am not sure how to set
> those values - those seem to be fixed, as far as I can tell, based on what
> devices you have, and I haven't seen the Logitech SW change them.
>
> Scott
>
>
> ------------------------------------------------------------------------------
> See everything from the browser to the database with AppDynamics
> Get end-to-end visibility with application monitoring from AppDynamics
> Isolate bottlenecks and diagnose root cause in seconds.
> Start your free trial of AppDynamics Pro today!
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
> _______________________________________________
> concordance-devel mailing list
> concordance-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/concordance-devel
>
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
