Can you recompile libconcord with debug enabled and provide the output?
(Add "CPPFLAGS=-D_DEBUG" to your ./configure)
On Wed, 30 Dec 2015, Parker Reed wrote:
Doesn't hit the reset cycle. Immediately dies after verifying.
Manual reset worked. So might be an issue with the verification.
On Wed, Dec 30, 2015 at 12:34 AM, Scott Talbert <s...@techie.net> wrote:
Interesting. So it appears that the failure is happening when
we are
trying to reset the remote or reconnect to it after the reset.
When using
the USB 2.0 port, do you see the remote resetting (ie, the
screen goes
blank, starts booting up, etc)?
Also, when using the USB 2.0 port, can you reset the remote
successfully
using 'concordance -r'?
Scott
On Tue, 29 Dec 2015, Parker Reed wrote:
> Well that's interesting. Tried in a USB 3.0 port instead of
2.0 and it
> worked!
>
> On Tue, Dec 29, 2015 at 11:37 PM, Parker Reed
<parker.l.r...@gmail.com>
> wrote:
> Here's the info from the remote
>
> [parker@rcvrd ~]$ concordance -iv
> Concordance 1.2
> Copyright 2007 Kevin Timmerman and Phil Dibowitz
> This software is distributed under the GPLv3.
>
> Requesting identity: 100% done
> Model: Logitech Harmony 880 (Espresso)
> Skin: 15
> Firmware Version: 4.4
> Firmware Type: 0
> Hardware Version: 1.8.0
> External Flash: 2 MiB - 01:49 AMD Am29LV160BB
> Architecture: 8
> Protocol: 8
> Manufacturer: Harmony Remote 0-4.4.2
> Product: Harmony Remote 0-4.4.2
> IRL, ORL, FRL: 0, 0, 0
> USB VID: 046D
> USB PID: C110
> USB Ver: 080F
> Serial Number: {EEEEEEEE-EEEE-EEEE-EEEE-EEEEEEEEEEEE}
> {2819984D-F05A-4EE5-9FA9-C815851DFA4E}
> {863D7E6E-17B4-4D95-A794-84207A436408}
> Config Flash Used: 19% (372 of 1920 KiB)
>
> Success!
>
>
>
> On Tue, Dec 29, 2015 at 11:34 PM, Parker Reed
> <parker.l.r...@gmail.com> wrote:
> I registered on the old site, it gave me a
> Connectivity.EZHex file, flashed it successfully, setup
a
> TV on the website, gave me another Connectivity.EZHex,
> flashed successfully, but now when I try to flash the
> Update.EZHex it gives me it errors out after verifying
> every time.
>
> Remote is sitting in the dock and connected to computer. Tried
> out of dock with same results. Libconcord and Concordance from
> git.
>
> [parker@rcvrd ~]$ concordance -v Downloads/Update.EZHex
> Concordance 1.2
> Copyright 2007 Kevin Timmerman and Phil Dibowitz
> This software is distributed under the GPLv3.
>
> Requesting identity: 100% done
> Contacting website: 100% done
> Initializing update: 100% done
> Invalidating flash: 100% done
> Erasing flash: 100% done
> Writing config: 100% 371 KiB done
> Verifying config: 100% 371 KiB done
> Failed to upload config: Unknown error
> Failed with error -1
>
> -Parker Reed
>
>
>
>
>
---------------------------------------------------------------------------
---
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
------------------------------------------------------------------------------
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
