http://qa.mandrakesoft.com/show_bug.cgi?id=5635
------- Additional Comments From [EMAIL PROTECTED] 2003-16-09 03:04 ------- I updated the kernel 2.4.22.9mdk but still no scanner detected devices: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=a800 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=a400 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms lsmod: Module Size Used by Not tainted sg 35068 0 (autoclean) scanner 12096 0 lp 8160 0 parport_pc 25544 1 parport 34472 1 [lp parport_pc] radeon 108512 13 agpgart 48292 3 (autoclean) ipt_TOS 1592 12 (autoclean) ipt_MASQUERADE 2200 1 (autoclean) ipt_REJECT 3960 4 (autoclean) ipt_LOG 4184 6 (autoclean) ipt_state 1080 32 (autoclean) ipt_multiport 1176 10 (autoclean) ipt_conntrack 1560 0 (autoclean) iptable_filter 2316 1 (autoclean) iptable_mangle 2712 1 (autoclean) iptable_nat 20814 1 (autoclean) [ipt_MASQUERADE] ip_conntrack 26468 3 (autoclean) [ipt_MASQUERADE ipt_state ipt_conntrack iptable_nat] ip_tables 15072 12 [ipt_TOS ipt_MASQUERADE ipt_REJECT ipt_LOG ipt_state ipt_multiport ipt_conntrack iptable_filter iptable_mangle iptable_nat] snd-seq-oss 32000 0 (unused) snd-seq-midi-event 6080 0 [snd-seq-oss] snd-seq 42544 2 [snd-seq-oss snd-seq-midi-event] snd-pcm-oss 43652 0 snd-mixer-oss 14200 0 [snd-pcm-oss] snd-via82xx 15360 0 snd-pcm 79588 0 [snd-pcm-oss snd-via82xx] snd-timer 18436 0 [snd-seq snd-pcm] snd-ac97-codec 45720 0 [snd-via82xx] snd-mpu401-uart 4704 0 [snd-via82xx] snd-rawmidi 17760 0 [snd-mpu401-uart] snd-seq-device 5832 0 [snd-seq-oss snd-seq snd-rawmidi] snd-page-alloc 9044 0 [snd-via82xx snd-pcm] snd 41348 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-via82xx snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 6308 0 [snd] nfsd 75280 8 (autoclean) af_packet 14824 2 (autoclean) floppy 55932 0 tulip 43968 1 (autoclean) ne2k-pci 6720 1 (autoclean) 8390 7752 0 (autoclean) [ne2k-pci] supermount 84032 4 (autoclean) ext3 65284 2 (autoclean) jbd 48888 2 (autoclean) [ext3] ide-cd 33956 0 ide-scsi 11376 0 sr_mod 19384 0 cdrom 32608 0 [ide-cd sr_mod] scsimon 9312 0 (unused) mod_quickcam 102912 0 usb-storage 91616 0 videodev 7936 0 [mod_quickcam] usb-uhci 25136 0 (unused) usbcore 74956 1 [scanner mod_quickcam usb-storage usb-uhci] rtc 9004 0 (autoclean) reiserfs 198004 2 sd_mod 12188 0 aic7xxx 162160 0 scsi_mod 93344 7 [sg ide-scsi sr_mod scsimon usb-storage sd_mod aic7xxx] scsi: Attached devices: Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: YAMAHA Model: CRW4416S Rev: 1.0j Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: IBM Model: DFHSS2F Rev: 4141 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: IOMEGA Model: ZIP 100 Rev: D.09 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: eUSB Model: Compact Flash Rev: Type: Direct-Access ANSI SCSI revision: 02 Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: RW/DVD GCC-4120B Rev: 2.02 Type: CD-ROM ANSI SCSI revision: 02 sane-find-scanner: # No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. # No USB scanners found. If you expected something different, make sure that # you have loaded a driver for your USB host controller and have installed a # kernel scanner module. # Scanners connected to the parallel port or other proprietary ports can't be # detected by this program. scanimage: No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: HP5200C scanner isn't detected by scannerdrake.
