http://qa.mandrakesoft.com/show_bug.cgi?id=5835
------- Additional Comments From [EMAIL PROTECTED] 2003-23-09 12:30 ------- There is also an update for 9.1 for the drakxtools package, which fixes some of these issues. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Error: No connection could be made in the InterNet! With use of “net_monitor”. Short description of the error: Conditions: 1.Analoge modem with 56 K at the interface ttyS1 (COM2) 2.Analoge modem in the Handy 9.6 K at the interface ttyS1 (COM2) After that start from ”drakconnect” we register all important data. Parameters in German: Expertenmodus = ON Autoerkennung = OFF Normale Modem Verbindung = OK ttyS1 (COM2) = OK Einwahl Parameter = OK Einwahl Versuch = nein Assistent end ! Call of “net_monitor” over the console. GUI is called, start with connects #>SIOCDELRT: No such process #>Failed to activate ppp0 with error 2 Result no connection! HP: No further error messages also not in the log files! I MHO the file: “ifcfg-ppp0” has a lot of missing parameters! Original generated File: ifcfg-ppp0 ---------------------------------- DEVICE=ppp0 BOOTPROTO=none ONBOOT=no ----------------------------------- I completed the “ifcfg-ppp0” file. The file is worked on! See example 56k modem. new corrected file “ifcfg-ppp0” : Example 56k modem. ---------------------------------------- DEVICE="ppp0" BOOTPROTO="none" ONBOOT="no" NAME="test" USEWVDIAL="no" WVDIALSECT="" USERCTL="no" PEERDNS="yes" MODEMPORT="/dev/ttyS1" LINESPEED="115200" PERSIST="no" DEFABORT="no" DEBUG="no" PPP_FIREWALL="no" INITSTRING="" DEFROUTE="yes" HARDFLOWCTL="no" ESCAPECHARS="no" PPPOPTIONS="" PAPNAME="freenet" REMIP="" NETMASK="" IPADDR="" MRU="1500" MTU="1500" DISCONNECTTIMEOUT="" RETRYTIMEOUT="0" ------------------------------------------------------