http://qa.mandrakesoft.com/show_bug.cgi?id=5175
------- Additional Comments From [EMAIL PROTECTED] 2003-23-09 19:35 ------- These are what was showing up among the top 10 or so that never used more CPU than top: part.script init keventd kapmd ksoftirqd_CPU0 kswapd bdflush kupdated kinoded These used more CPU than top: devfsd (up to 50%, but usually less than top) drakeupdat_fsta (up to 97.7%, dropping sometimes to only about 60%) The last pretty steadily stayed above top at very high CPU. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: mc startup has actually been fubar since at least 9.0, possibly before that, but I can't remember. I haven't stopwatched it, but if started immediately upon 1st login after boot, it must be taking at least one minute, a seeming eternity, both in 9.1 and 9.2rc1. Upon entering mc at shell prompt, the screen is blanked, cursor goes to bottom left, and nothing happens for a while. Eventually, some liblow error messages quickly scroll up the screen too fast to read, and mc becomes ready to use. Hardware is rather old, P200 for rc1, with 128 MB RAM & PCI graphics card, but immaterially better on K6/2-500 with 256 MB RAM and same graphics adapter for 9.1, and on a P3-450 with 768 MB RAM and G450 graphics adapter..
