-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Guillaume Cottenceau wanted us to know:

>fried:
>CRD-8400B (machine: IBM PC 300 PL)
>CRD-8482B (machine: Dell Optiplex GX1)
>CRD-8322B
>GCR-8523B
>
>work:
>HL-DT-ST CD-ROM GCR-8520B
>HL-DT-ST RW/DVD GCC-4480B (motherboard: ASUS A7N8X-Deluxe)
>
>That's not many, under the "work" label. And I'm a bit surprised.
>No one else has a working 9.2 with an LG drive?

I do.  Just burned another set of 9.2 isos under 9.2 to make sure that
the upgrade from 9.1 -> 9.2 was good.  Even though it says I'm using
DMA, I can only burn at about a maximum of 8X (drive is capable of
burning at 24X).  Under the 9.1 update kernel (25mdk), I was able to
burn at 16X.  Under some older kernels it was burning at 32X even
though the drives says it's only capable of 24X.  Go figure.

Here's what I have:

[EMAIL PROTECTED] ~]# cat /proc/ide/hdc/{model,settings}
HL-DT-ST CD-RW GCE-8240B
name                    value           min             max             mode
- ----                    -----           ---             ---             ----
bios_cyl                0               0               1023            rw
bios_head               0               0               255             rw
bios_sect               0               0               63              rw
current_speed           34              0               70              rw
init_speed              34              0               70              rw
io_32bit                0               0               3               rw
keepsettings            0               0               1               rw
log                     0               0               1               rw
nice1                   1               0               1               rw
number                  2               0               3               rw
pio_mode                write-only      0               255             w
slow                    0               0               1               rw
transform               1               0               3               rw
unmaskirq               0               0               1               rw
using_dma               1               0               1               rw

And from dmesg:
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 961B MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG SV4002H, ATA DISK drive
blk: queue c0180d20, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST CD-RW GCE-8240B, ATAPI CD/DVD-ROM drive
hdd: Maxtor 52049H3, ATA DISK drive
blk: queue c01812b0, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=4870/255/63, UDMA(100)
hdd: attached ide-disk driver.
hdd: host protected area => 1
hdd: 40021632 sectors (20491 MB) w/2048KiB Cache, CHS=39704/16/63, UDMA(33)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
 /dev/ide/host0/bus1/target1/lun0: [PTBL] [2491/255/63] p1 p2 p3 < p5 p6 p7 >
ide: late registration of driver.

And the hardware:
[EMAIL PROTECTED] ~]# lspcidrake -v
unknown         : Silicon Integrated System|SiS 650 Host-to-PCI Bridge [BRIDGE_H
OST] (vendor:1039 device:0650)
unknown         : Silicon Integrated Systems [SiS]|5591/5592 AGP [BRIDGE_PCI] (v
endor:1039 device:0001)
unknown         : Silicon Integrated Systems [SiS]|85C503/5513 [BRIDGE_ISA] (ven
dor:1039 device:0008)
usb-ohci        : Silicon Integrated Systems [SiS]|7001 USB [SERIAL_USB] (vendor
:1039 device:7001)
usb-ohci        : Silicon Integrated Systems [SiS]|7001 USB [SERIAL_USB] (vendor
:1039 device:7001)
unknown         : Silicon Integrated Systems [SiS]|5513 [IDE] [STORAGE_IDE] (ven
dor:1039 device:5513)
snd-intel8x0    : Silicon Integrated Systems [SiS]|SiS7012 PCI Audio Accelerator
 [MULTIMEDIA_AUDIO] (vendor:1039 device:7012 subv:1458 subd:a001)
unknown         : unknown (151f/0000/ffff/ffff) [COMMUNICATION_OTHER]
8139too         : Realtek|RTL-8139 [NETWORK_ETHERNET] (vendor:10ec device:8139)
Card:SiS 650    : Silicon Integrated System|SiS650/651/740 GUI 2D/3D Accelerator
 [DISPLAY_VGA] (vendor:1039 device:6325)
unknown         : Unknown|USB OHCI Root Hub [Hub|Root Hub] (vendor:0000 device:0
000)
unknown         : Unknown|USB OHCI Root Hub [Hub|Root Hub] (vendor:0000 device:0
000)
unknown         : NEC Corporation|USB2.0 Hub Controller [Hub|Root Hub] (vendor:0
50d device:0224)

Success story here.  No burnt hardware.
- -- 
Blue skies...           Todd
| Get a bigger hammer!   |  Two things prevent you from having    |
| http://www.mrball.net  |  sex with women:  sunlight & sobriety  |
| http://faq.mrball.net  |                          --Tom Leykis  |
Linux kernel 2.4.22-10mdk   load average: 2.18, 2.24, 1.84
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
Comment: http://www.mrball.net/todd.asc

iD4DBQE/mPuDIBT1264ScBURAjNTAJ9zTfUlr7u0zDKkHpRFXnn9903UCwCY0n58
ROOjeD+BdCVzNVgJfQtoiQ==
=fGft
-----END PGP SIGNATURE-----

Reply via email to