Jim Tarvid <[EMAIL PROTECTED]> writes: > On Monday 09 September 2002 05:56 am, you wrote: > > Jim Tarvid <[EMAIL PROTECTED]> writes: > > > A network.img from cooker 2002-05-09 works on a box where a network.img > > > from rc2 fails. > > > > > > Network card is a Netgear LC82C169C > > > > What's the problem? Please report useful information from > > consoles #3 and #4. > Console #3 > PCI: device 11ad 0002 is "Lite-On|LNETx" tulip > have to insmod tulip > succeeded tulip > NET: alias eth0 tulip > have to insmod af-packet > succeeded af-packet > guessing netmask > configuring device eth0 ip:12.43.222.7 nm: 255.255.254.0 nw: 12.43.222.0 bc > 12.43.223.255 > reverse name lookup on self failed > reverse name lookup on DNS failed (this succeeds on the 2002-05-09 cooker > version) > Console #4 > Linux Tulip driver version 0.9.15-pre11 (May 11, 2002) (pre10 March 8, 2002 > on the version that works) > PCI: Found IRQ 11 for device 00:0c.0 > tulip0: MII transceiver #1 config 3000 status 7829 advertising 01e1 > eth0: Lite-On 82C168 PNIC rev 32 at 0xe0000 00:A0:CC:DC:27:63:28:01 > Setting full duplex based on MII #1 link partner capability of 41e1 > > The differences are noted above but they are > reverse name lookup on DNS succeeds on the old version > the old version is pre10 instead of pre11
what difference? what are you talking about? the logs you show are from a successful installation of the tulip driver, I see no problem. what's your problem? please be descriptive.. -- Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
