2010/1/12 Piotr Piwko <piotr.pi...@gmail.com>: > I attached the first log of coreboot-v3 booting process for > adl/msm800sev board. As we can see there are the same errors with SMB. > I suppose they are related as previously with the references to DIMM1 > which are not present in this board.
OK, I fixed it by assigning the DIMM0 device address to the DIMM1 definition in mainboard/adl/msm800sev/initram.c file: //#define DIMM1 ((u8) 0xA2) #define DIMM1 DIMM0 > LAR: Run file fallback/initram/segment0 failed: No such file. > Fallback failed. Try normal boot It seems that my coreboot image was built in normal boot mode while it tries use fallback boot. How can I enable the fallback mode in building process or enforce the use of the normal mode in booting process? Thanks in advance, -- Piotr Piwko http://www.embedded-engineering.pl/ -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot