Register the tvp514x decoder devices directly in board platform
data instead of letting the vpif capture driver register them at
their run-time. This uses the V4L2 asynchronous subdevice probing capability.
Signed-off-by: Lad, Prabhakar <prabhakar....@ti.com>
Cc: Sekhar Nori <nsek...@ti.com>
---
arch/arm/mach-davinci/board-da850-evm.c | 57 +++++++++++++++++++++++++++----
1 files changed, 50 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c
b/arch/arm/mach-davinci/board-da850-evm.c
index 0299915..089c127 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -49,6 +49,7 @@
#include <media/tvp514x.h>
#include <media/adv7343.h>
+#include <media/v4l2-async.h>
#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
@@ -732,6 +733,12 @@ static struct pca953x_platform_data
da850_evm_bb_expander_info = {
.names = da850_evm_bb_exp,
};
+static struct tvp514x_platform_data tvp5146_pdata = {
+ .clk_polarity = 0,
+ .hs_polarity = 1,
+ .vs_polarity = 1,
+};
+
static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
@@ -744,6 +751,14 @@ static struct i2c_board_info __initdata
da850_evm_i2c_devices[] = {
I2C_BOARD_INFO("tca6416", 0x21),
.platform_data = &da850_evm_bb_expander_info,
},
+ {
+ I2C_BOARD_INFO("tvp5146", 0x5c),
+ .platform_data = &tvp5146_pdata,
+ }, {
+ I2C_BOARD_INFO("tvp5146", 0x5d),
+ .platform_data = &tvp5146_pdata,
+ },
+
};
static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
@@ -1170,15 +1185,10 @@ static __init int da850_evm_init_cpufreq(void) { return
0; }
#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT)
-#define TVP5147_CH0 "tvp514x-0"
-#define TVP5147_CH1 "tvp514x-1"
+#define TVP5147_CH0 "tvp514x 1-005d"
+#define TVP5147_CH1 "tvp514x 1-005c"
/* VPIF capture configuration */
-static struct tvp514x_platform_data tvp5146_pdata = {
- .clk_polarity = 0,
- .hs_polarity = 1,
- .vs_polarity = 1,
-};
#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
@@ -1229,6 +1239,37 @@ static struct vpif_subdev_info
da850_vpif_capture_sdev_info[] = {
},
};
+static struct v4l2_async_subdev tvp1_sd = {
+ .hw = {
+ .bus_type = V4L2_ASYNC_BUS_I2C,
+ .match.i2c = {
+ .adapter_id = 1,
+ .address = 0x5c,
+ },
+ },
+};
+
+static struct v4l2_async_subdev tvp2_sd = {
+ .hw = {
+ .bus_type = V4L2_ASYNC_BUS_I2C,
+ .match.i2c = {
+ .adapter_id = 1,
+ .address = 0x5d,
+ },
+ },
+};
+
+static struct v4l2_async_subdev *vpif_capture_async_subdevs[] = {
+ /* Single 2-element group */
+ &tvp1_sd,
+ &tvp2_sd,
+};
+
+static int vpif_capture_async_subdev_sizes[] = {
+ ARRAY_SIZE(vpif_capture_async_subdevs),
+ 0,
+};
+
static struct vpif_capture_config da850_vpif_capture_config = {
.subdev_info = da850_vpif_capture_sdev_info,
.subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
@@ -1253,6 +1294,8 @@ static struct vpif_capture_config
da850_vpif_capture_config = {
},
},
.card_name = "DA850/OMAP-L138 Video Capture",
+ .asd = vpif_capture_async_subdevs,
+ .asd_sizes = vpif_capture_async_subdev_sizes,
};
/* VPIF display configuration */
--
1.7.4.1
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
