Changed all pr_warning() calls to pr_warn(), as advised by checkpatch.pl.
Also, while modifying those pr_warning() calls I changed hardcoded
function names to use '"%s:", __func__' instead, and converted acronym
usage to upper case
Signed-off-by: Robert Tivy <rt...@ti.com>
---
Clean up files that will be otherwise modified in subsequent patch.
arch/arm/mach-davinci/board-da850-evm.c | 102 +++++++++++----------------
arch/arm/mach-davinci/board-omapl138-hawk.c | 30 +++-----
2 files changed, 54 insertions(+), 78 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c
b/arch/arm/mach-davinci/board-da850-evm.c
index 0299915..fae66e3 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -349,13 +349,13 @@ static inline void da850_evm_setup_nor_nand(void)
if (!HAS_MMC) {
ret = davinci_cfg_reg_list(da850_evm_nand_pins);
if (ret)
- pr_warning("da850_evm_init: nand mux setup failed: "
- "%d\n", ret);
+ pr_warn("%s: NAND mux setup failed: %d\n",
+ __func__, ret);
ret = davinci_cfg_reg_list(da850_evm_nor_pins);
if (ret)
- pr_warning("da850_evm_init: nor mux setup failed: %d\n",
- ret);
+ pr_warn("%s: NOR mux setup failed: %d\n",
+ __func__, ret);
da850_evm_init_nor();
@@ -477,19 +477,19 @@ static int da850_evm_ui_expander_setup(struct i2c_client
*client, unsigned gpio,
ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
if (ret) {
- pr_warning("Cannot open UI expander pin %d\n", sel_a);
+ pr_warn("Cannot open UI expander pin %d\n", sel_a);
goto exp_setup_sela_fail;
}
ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
if (ret) {
- pr_warning("Cannot open UI expander pin %d\n", sel_b);
+ pr_warn("Cannot open UI expander pin %d\n", sel_b);
goto exp_setup_selb_fail;
}
ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
if (ret) {
- pr_warning("Cannot open UI expander pin %d\n", sel_c);
+ pr_warn("Cannot open UI expander pin %d\n", sel_c);
goto exp_setup_selc_fail;
}
@@ -501,7 +501,7 @@ static int da850_evm_ui_expander_setup(struct i2c_client
*client, unsigned gpio,
da850_evm_ui_keys_init(gpio);
ret = platform_device_register(&da850_evm_ui_keys_device);
if (ret) {
- pr_warning("Could not register UI GPIO expander push-buttons");
+ pr_warn("Could not register UI GPIO expander push-buttons");
goto exp_setup_keys_fail;
}
@@ -690,14 +690,14 @@ static int da850_evm_bb_expander_setup(struct i2c_client
*client,
da850_evm_bb_keys_init(gpio);
ret = platform_device_register(&da850_evm_bb_keys_device);
if (ret) {
- pr_warning("Could not register baseboard GPIO expander keys");
+ pr_warn("Could not register baseboard GPIO expander keys");
goto io_exp_setup_sw_fail;
}
da850_evm_bb_leds_init(gpio);
ret = platform_device_register(&da850_evm_bb_leds_device);
if (ret) {
- pr_warning("Could not register baseboard GPIO expander LEDS");
+ pr_warn("Could not register baseboard GPIO expander LEDs");
goto io_exp_setup_leds_fail;
}
@@ -1065,21 +1065,19 @@ static int __init da850_evm_config_emac(void)
}
if (ret)
- pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
- ret);
+ pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n",
+ __func__, ret);
/* configure the CFGCHIP3 register for RMII or MII */
__raw_writel(val, cfg_chip3_base);
ret = davinci_cfg_reg(DA850_GPIO2_6);
if (ret)
- pr_warning("da850_evm_init:GPIO(2,6) mux setup "
- "failed\n");
+ pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
if (ret) {
- pr_warning("Cannot open GPIO %d\n",
- DA850_MII_MDIO_CLKEN_PIN);
+ pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN);
return ret;
}
@@ -1090,8 +1088,7 @@ static int __init da850_evm_config_emac(void)
ret = da8xx_register_emac();
if (ret)
- pr_warning("da850_evm_init: emac registration failed: %d\n",
- ret);
+ pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
return 0;
}
@@ -1443,57 +1440,53 @@ static __init void da850_evm_init(void)
ret = pmic_tps65070_init();
if (ret)
- pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
- ret);
+ pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
ret = da850_register_edma(da850_edma_rsv);
if (ret)
- pr_warning("da850_evm_init: edma registration failed: %d\n",
- ret);
+ pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
ret = davinci_cfg_reg_list(da850_i2c0_pins);
if (ret)
- pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
- ret);
+ pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret);
ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
if (ret)
- pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
- ret);
+ pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret);
ret = da8xx_register_watchdog();
if (ret)
- pr_warning("da830_evm_init: watchdog registration failed: %d\n",
- ret);
+ pr_warn("%s: watchdog registration failed: %d\n",
+ __func__, ret);
if (HAS_MMC) {
ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
if (ret)
- pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
- " %d\n", ret);
+ pr_warn("%s: MMCSD0 mux setup failed: %d\n",
+ __func__, ret);
ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
if (ret)
- pr_warning("da850_evm_init: can not open GPIO %d\n",
- DA850_MMCSD_CD_PIN);
+ pr_warn("%s: can not open GPIO %d\n",
+ __func__, DA850_MMCSD_CD_PIN);
gpio_direction_input(DA850_MMCSD_CD_PIN);
ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
if (ret)
- pr_warning("da850_evm_init: can not open GPIO %d\n",
- DA850_MMCSD_WP_PIN);
+ pr_warn("%s: can not open GPIO %d\n",
+ __func__, DA850_MMCSD_WP_PIN);
gpio_direction_input(DA850_MMCSD_WP_PIN);
ret = da8xx_register_mmcsd0(&da850_mmc_config);
if (ret)
- pr_warning("da850_evm_init: mmcsd0 registration failed:"
- " %d\n", ret);
+ pr_warn("%s: MMCSD0 registration failed: %d\n",
+ __func__, ret);
ret = da850_wl12xx_init();
if (ret)
- pr_warning("da850_evm_init: wl12xx initialization"
- " failed: %d\n", ret);
+ pr_warn("%s: WL12xx initialization failed: %d\n",
+ __func__, ret);
}
davinci_serial_init(&da850_evm_uart_config);
@@ -1511,16 +1504,14 @@ static __init void da850_evm_init(void)
ret = davinci_cfg_reg_list(da850_evm_mcasp_pins);
if (ret)
- pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
- ret);
+ pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret);
da850_evm_snd_data.sram_pool = sram_get_gen_pool();
da8xx_register_mcasp(0, &da850_evm_snd_data);
ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
if (ret)
- pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
- ret);
+ pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret);
ret = da8xx_register_uio_pruss();
if (ret)
@@ -1530,51 +1521,44 @@ static __init void da850_evm_init(void)
/* Handle board specific muxing for LCD here */
ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
if (ret)
- pr_warning("da850_evm_init: evm specific lcd mux setup "
- "failed: %d\n", ret);
+ pr_warn("%s: EVM specific LCD mux setup failed: %d\n",
+ __func__, ret);
ret = da850_lcd_hw_init();
if (ret)
- pr_warning("da850_evm_init: lcd initialization failed: %d\n",
- ret);
+ pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
if (ret)
- pr_warning("da850_evm_init: lcdc registration failed: %d\n",
- ret);
+ pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);
ret = da8xx_register_rtc();
if (ret)
- pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
+ pr_warn("%s: RTC setup failed: %d\n", __func__, ret);
ret = da850_evm_init_cpufreq();
if (ret)
- pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
- ret);
+ pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret);
ret = da8xx_register_cpuidle();
if (ret)
- pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
- ret);
+ pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret);
ret = da850_register_pm(&da850_pm_device);
if (ret)
- pr_warning("da850_evm_init: suspend registration failed: %d\n",
- ret);
+ pr_warn("%s: suspend registration failed: %d\n", __func__, ret);
da850_vpif_init();
ret = da8xx_register_spi(1, da850evm_spi_info,
ARRAY_SIZE(da850evm_spi_info));
if (ret)
- pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
- ret);
+ pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret);
ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
if (ret)
- pr_warning("da850_evm_init: sata registration failed: %d\n",
- ret);
+ pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
da850_evm_setup_mac_addr();
}
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c
b/arch/arm/mach-davinci/board-omapl138-hawk.c
index dc1208e..d5a6bcd 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -48,8 +48,7 @@ static __init void omapl138_hawk_config_emac(void)
val &= ~BIT(8);
ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
if (ret) {
- pr_warning("%s: cpgmac/mii mux setup failed: %d\n",
- __func__, ret);
+ pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret);
return;
}
@@ -61,8 +60,7 @@ static __init void omapl138_hawk_config_emac(void)
ret = da8xx_register_emac();
if (ret)
- pr_warning("%s: emac registration failed: %d\n",
- __func__, ret);
+ pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
}
/*
@@ -147,15 +145,14 @@ static __init void omapl138_hawk_mmc_init(void)
ret = davinci_cfg_reg_list(hawk_mmcsd0_pins);
if (ret) {
- pr_warning("%s: MMC/SD0 mux setup failed: %d\n",
- __func__, ret);
+ pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret);
return;
}
ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN,
GPIOF_DIR_IN, "MMC CD");
if (ret < 0) {
- pr_warning("%s: can not open GPIO %d\n",
+ pr_warn("%s: can not open GPIO %d\n",
__func__, DA850_HAWK_MMCSD_CD_PIN);
return;
}
@@ -163,15 +160,14 @@ static __init void omapl138_hawk_mmc_init(void)
ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN,
GPIOF_DIR_IN, "MMC WP");
if (ret < 0) {
- pr_warning("%s: can not open GPIO %d\n",
+ pr_warn("%s: can not open GPIO %d\n",
__func__, DA850_HAWK_MMCSD_WP_PIN);
goto mmc_setup_wp_fail;
}
ret = da8xx_register_mmcsd0(&da850_mmc_config);
if (ret) {
- pr_warning("%s: MMC/SD0 registration failed: %d\n",
- __func__, ret);
+ pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret);
goto mmc_setup_mmcsd_fail;
}
@@ -250,8 +246,7 @@ static __init void omapl138_hawk_usb_init(void)
ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
if (ret) {
- pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
- __func__, ret);
+ pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
return;
}
@@ -280,8 +275,7 @@ static __init void omapl138_hawk_usb_init(void)
ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
if (ret) {
- pr_warning("%s: USB 1.1 registration failed: %d\n",
- __func__, ret);
+ pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
goto usb11_setup_fail;
}
@@ -307,8 +301,7 @@ static __init void omapl138_hawk_init(void)
ret = da850_register_edma(da850_edma_rsv);
if (ret)
- pr_warning("%s: EDMA registration failed: %d\n",
- __func__, ret);
+ pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
omapl138_hawk_mmc_init();
@@ -316,9 +309,8 @@ static __init void omapl138_hawk_init(void)
ret = da8xx_register_watchdog();
if (ret)
- pr_warning("omapl138_hawk_init: "
- "watchdog registration failed: %d\n",
- ret);
+ pr_warn("%s: watchdog registration failed: %d\n",
+ __func__, ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
--
1.7.9.4
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
