Here is the exact output: Processor : ARM926EJ-S rev 5 (v5l) BogoMIPS : 183.09 Features : swp half thumb fastmult edsp java CPU implementer : 0x41 CPU architecture: 5TEJ CPU variant : 0x0 CPU part : 0x926 CPU revision : 5 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format C Cache format : Harvard I size : 32768 I assoc : 4 I line length : 32 I sets : 256 D size : 32768 D assoc : 4 D line length : 32 D sets : 256
Hardware : Oxsemi NAS Revision : 0000 Serial : 00000752b8726800 2012/1/11 LoSpo <francesco.sposs...@gmail.com> > Maybe could be the same: i know that is a : > > *Oxford 810DSE* @367MHZ, 256 mb ram DDR2 > > quote: > "The Oxford OXE810DSE<http://www.plxtech.com/products/consumer/oxe810dse.asp> > is > a dual-channel version of the OXE810SE used in the Iomega Home Media > Network Hard Drive <http://www.smallnetbuilder.com/content/view/30720/75/>. > Both Oxford devices include an 367 MHz ARM926EJ-S processor with 32 Kbyte > caches & MMU and 128 Kbyte of on-chip SRAM. The only difference between > them is that the 810DSE includes a second SATA port and a RAID controller > supporting span, RAID 0 and 1." > > 2012/1/11 Rabeeh Khoury <rab...@solid-run.com> > >> ** >> On 01/09/2012 03:01 PM, LoSpo wrote: >> >> Hi, in your opinion is possible to install debian in my NAS: N2200 >> thecus?? >> >> The system tells me it is a "Linux N2200 2.6.24 arm5tejl (Marvell >> arm5tejl processor) GCC version 4.3.2. What debian/linux would I have to >> install on the NAS? >> >> -- >> ..::LoSpo::.. >> >> what does 'cat /proc/cpuinf' show? >> > > > > -- > ..::LoSpo::.. > -- ..::LoSpo::..