Package: installation-reports
INSTALL REPORT
Debian-installer-version: sparc beta3 mini-iso
http://ftp.debian.org/debian/dists/unstable/main/installer-sparc/beta3/images/cdrom-mini.iso
uname -a: Linux dumbluck 2.4.24-sparc64-smp #1 SMP Fri Jan 30 19:06:19 EST 2004
sparc64 GNU/Linux
Date: 2004-03-21 08:00
Method: How did you install? mini-iso
What did you boot off? cdrom
If network install, from where? debian.oregonstate.edu
Proxied? no
Machine: Sun Ultra 2
Processor: 2 x 167 Mhz Ultrasparc I
Memory: 192 MB
Root Device: 9GB Scsi /dev/sda1
Root Size/partition table: 8.6 Gb
Output of lspci:
turbogx4 (cg6) framebuffer
Base System Installation Checklist:
Initial boot worked: [E ]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Same system as previous succesfull install except keyboard and monitor
rather than serial console, and previous failed except tgx4 rather
than creator framebuffer.
Hangs at "Setting up filesystems, please wait ..." and half a dozen
unimplemented instruction errors. (The latter are normal.) Alt-F2
allows me to get a busybox shell, languagechooser is running. Alt-F1
does not restore the display.
--
Blars Blarson [EMAIL PROTECTED]
http://www.blars.org/blars.html
With Microsoft, failure is not an option. It is a standard feature.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
