Package: installation-reports
version: sarge
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20041114/
uname -a: Linux debian 2.6.8-1-386 #1 Thu Oct 7 02:21:16 EDT 2004 i586 GNU/Linux
Date: Mo Nov 15 11:35:53 CET 2004
Method: I installed debian from the netinstall-cd without a proxy
Machine: ???
Processor: Detected 501.194 MHz processor CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000 CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000 CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D processor stepping 0c
Memory: 317068k/327616k available (1329k kernel code, 9812k reserved, 723k data, 204k init, 0k highmem)
Root Device: /dev/hda1
Root Size/partition table: fdisk -l Disk /dev/hda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 23 184716 83 Linux /root /dev/hda4 24 7297 58428405 5 Extended /dev/hda5 470 7297 54845878+ 83 Linux /data /dev/hda6 24 197 1397592 83 Linux /usr /dev/hda7 198 269 578308+ 83 Linux /var /dev/hda8 270 295 208813+ 82 Linux swap /dev/hda9 296 308 104391 83 Linux /tmp /dev/hda10 309 469 1293201 83 Linux /home
Output of lspci: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 22) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 11) 0000:00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 30) 0000:00:08.0 USB Controller: NEC Corporation USB (rev 41) 0000:00:08.1 USB Controller: NEC Corporation USB (rev 41) 0000:00:08.2 USB Controller: NEC Corporation USB 2.0 (rev 02) 0000:00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) 0000:00:0b.0 SCSI storage controller: Adaptec AIC-7861 (rev 03) 0000:01:00.0 VGA compatible controller: S3 Inc. 86c368 [Trio 3D/2X] (rev 02)
lspci -n: 0000:00:00.0 0600: 1106:0598 (rev 04) 0000:00:01.0 0604: 1106:8598 0000:00:07.0 0601: 1106:0596 (rev 22) 0000:00:07.1 0101: 1106:0571 (rev 10) 0000:00:07.2 0c03: 1106:3038 (rev 11) 0000:00:07.3 0600: 1106:3050 (rev 30) 0000:00:08.0 0c03: 1033:0035 (rev 41) 0000:00:08.1 0c03: 1033:0035 (rev 41) 0000:00:08.2 0c03: 1033:00e0 (rev 02) 0000:00:09.0 0200: 10b7:9055 (rev 30) 0000:00:0b.0 0100: 9004:6178 (rev 03) 0000:01:00.0 0300: 5333:8a13 (rev 02)
Base System Installation Checklist:
Initial boot worked: [ok ] Configure network HW: [ok] Config network: [ok ] Detect CD: [ok ] Load installer modules: [ok ] Detect hard drives: [ok ] Partition hard drives: [ok ] Create file systems: [ok ] Mount partitions: [ok ] Install base system: [ok ] Install boot loader: [ok ] Reboot: [ok ]
Comments/Problems: I used only apt for installing packages and I had no problems with the installation of sarge. The translations of the d-i into german are ok. I could not find any mistakes or problems.
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
