Package: installation-reports Debian-installer-version: Netboot-CD of m86k Sarge downloaded 18.10.2004 from a debian mirror in Germany uname -a: Linux (none) 2.2.25-mac #1 Thu Mar 18 01:26:39 CET 2004 m68k unknown Date: 2004-11-13, installation needed 4-5 hours Method: Booted the Sarge Netboot-CD using kernel vmlinuz-2.25-mac and initrd.22 from the /cdrom directory. Kernel and ram disk were not from the netboot-cd but from S. Marenkas page. No network connection was used. Machine: Mac IIci, etherlink/nb (nic), graphic card "supermac", cache card, internal hard disk, connected to a SCSI-Tower including 2 CD drives, in one was the Netinstall CD Processor: 25 Mhz Memory: 32 MB Root Device: SCSI. Before installation: /dev/sdb4. After installation (disconnected the SCSI tower) /dev/sda4 Root Size/partition table: /dev/sda (hard disk) /dev/sda1: Apple_partition_map /dev/sda2: Apple_driver /dev/sda3: Apple_HFS /dev/sda4: Apple_UNIX_SVR2 (/) /dev/sda5: Apple_UNIX_SVR2 (swap)
Output of lspci and lspci -n: (typing this in the console when using the installer says "lspci: not found") Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [ ] Config network: [ ] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] I am not sure, see text Install base system: [OI I am not sure, see text Install boot loader: [?] IF I understand right, the boot loader on macs is Penguin which is already needed for the installation Reboot: [ ] Did this myself using the poweroff command Problems: The installation did not finish correctly, there was an error with mounting or unmountig partitions. However, I switched to console used the "poweroff" command to shut down the Mac and unmount everything. After that I was able to boot using Penguin into the installed Linux . I did not come to the part where to set the root password and create a user. When bootin in the new installed system the root password was nothing (just pressing the enter key). But when in the system, everything seems to be OK. Comments: I missed a man page for partman. When reading README.html of the Netbood CD the links to "tools" is wrong (it goes to \tools and not to \install\tools). The Mac graphic card runs in Linux without a problem. It is connected to pc monitor. Not having a mac monitor I did not remove it. After having some strange installation problems, I have the feeling that - the Linux root partition must be previous to the swap on the hard disk - the order of the boot parameter in Penguin does matter. Maybe I did not find this in the manual. With no in-depth Linux and Mac experience I have to say: The Debian installer is great! It was much harder to install MacOS on the machine than Debian Linux afterwards. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
