Package: src:linux Version: 3.2.41-2 Severity: important Dear Maintainer,
Before last upgrade to linux-image-3.2.0-4-amd64 I was able to reach 1280x1024 without problem. Now, the kernel seams to switch early in gfx mode and set the resolution to 1024x768. Xorg keeps the same resolution. Notice than the screen actual resolution is still 1280x1024, so that right and bottom border display garbage. I recompiled the kernel without the DRM_GMA3600 option of the GMA500 driver and it fixed the problem. My box being a shuttle XS35 I believe my actual chipset is GMA500 not 3600 so it looks like the bad chipset was detected. This may be related to #703506 recent fix? -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=5bf7b457-5914-451f-a005-289a6ce49f4d ro quiet splash ** Not tainted ** Kernel log: [ 3.411335] scsi2 : ahci [ 3.411534] scsi3 : ahci [ 3.411672] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 44 [ 3.411680] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 44 [ 3.411684] ata3: DUMMY [ 3.411687] ata4: DUMMY [ 3.731610] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.737635] ata1.00: ATA-8: SAMSUNG HM160HI, HH100-08, max UDMA7 [ 3.737642] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.743745] ata1.00: configured for UDMA/133 [ 3.743974] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HI HH10 PQ: 0 ANSI: 5 [ 4.011479] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 4.063468] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.064056] ata2.00: ATA-8: V4-CT064V4SSD2, S5FAMM22, max UDMA/100 [ 4.064062] ata2.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.064793] ata2.00: configured for UDMA/100 [ 4.064990] scsi 1:0:0:0: Direct-Access ATA V4-CT064V4SSD2 S5FA PQ: 0 ANSI: 5 [ 4.073994] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 4.074029] sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 4.074198] sd 0:0:0:0: [sda] Write Protect is off [ 4.074205] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.074246] sd 1:0:0:0: [sdb] Write Protect is off [ 4.074253] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.074274] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.074310] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.075251] sdb: sdb1 [ 4.075861] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.095363] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.095538] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 4.151611] sda: sda1 sda3 [ 4.152383] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.178994] usb 4-1: New USB device found, idVendor=1267, idProduct=0213 [ 4.179001] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.179006] usb 4-1: Product: PS/2+USB Mouse [ 4.202373] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input0 [ 4.202588] generic-usb 0003:1267:0213.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.2-1/input0 [ 4.202633] usbcore: registered new interface driver usbhid [ 4.202636] usbhid: USB HID core driver [ 4.419316] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 4.578814] usb 5-2: New USB device found, idVendor=0e6a, idProduct=030c [ 4.578821] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.578827] usb 5-2: Product: Truly Ergonomic Computer Keyboard [ 4.578831] usb 5-2: Manufacturer: TrulyErgonomic.com [ 4.585301] input: TrulyErgonomic.com Truly Ergonomic Computer Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input1 [ 4.585447] generic-usb 0003:0E6A:030C.0002: input,hidraw1: USB HID v1.10 Keyboard [TrulyErgonomic.com Truly Ergonomic Computer Keyboard] on usb-0000:00:1d.3-2/input0 [ 4.589953] input: TrulyErgonomic.com Truly Ergonomic Computer Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input2 [ 4.590089] generic-usb 0003:0E6A:030C.0003: input,hidraw2: USB HID v1.10 Device [TrulyErgonomic.com Truly Ergonomic Computer Keyboard] on usb-0000:00:1d.3-2/input1 [ 4.826936] Btrfs loaded [ 4.830520] device fsid edfd1fa0-05d5-46ad-8952-e238b0c3c09e devid 1 transid 18461 /dev/sdb1 [ 4.888115] PM: Starting manual resume from disk [ 4.888122] PM: Hibernation image partition 8:3 present [ 4.888125] PM: Looking for hibernation image. [ 4.888484] PM: Image not found (code -22) [ 4.888487] PM: Hibernation image not present or could not be loaded. [ 4.946613] kjournald starting. Commit interval 5 seconds [ 4.946698] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 7.094265] udevd[357]: starting version 175 [ 7.816605] iTCO_vendor_support: vendor-support=0 [ 7.832291] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 7.832308] ACPI: Power Button [PWRB] [ 7.832480] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 [ 7.832493] ACPI: Sleep Button [SLPB] [ 7.832646] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 7.832657] ACPI: Power Button [PWRF] [ 7.870394] coretemp coretemp.0: Unable to read TjMax from CPU 0 [ 7.870411] coretemp coretemp.0: Using relative temperature scale! [ 7.870443] coretemp coretemp.0: Unable to read TjMax from CPU 2 [ 7.870458] coretemp coretemp.0: Using relative temperature scale! [ 7.905712] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 7.905957] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460) [ 7.906126] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.192569] jmb38x_ms 0000:02:00.3: setting latency timer to 64 [ 8.688196] device fsid edfd1fa0-05d5-46ad-8952-e238b0c3c09e devid 1 transid 18461 /dev/sdb1 [ 9.007252] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 9.007305] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 9.071171] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 9.098748] HDMI status: Codec=1 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 9.099038] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 9.099269] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 9.099467] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 10.063953] Adding 3906556k swap on /dev/sda3. Priority:-1 extents:1 across:3906556k [ 10.606681] EXT3-fs (sda1): using internal journal [ 10.934080] loop: module loaded [ 11.794828] device fsid edfd1fa0-05d5-46ad-8952-e238b0c3c09e devid 1 transid 18461 /dev/sdb1 [ 11.795382] btrfs: use ssd allocation scheme [ 11.795386] btrfs: disk space caching is enabled [ 13.493687] jme 0000:02:00.5: irq 46 for MSI/MSI-X [ 13.493794] jme 0000:02:00.5: eth0: Link is down [ 13.516146] jme 0000:02:00.5: eth0: Link is down [ 13.518228] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.777398] RPC: Registered named UNIX socket transport module. [ 13.777405] RPC: Registered udp transport module. [ 13.777410] RPC: Registered tcp transport module. [ 13.777414] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.934277] FS-Cache: Loaded [ 14.043251] FS-Cache: Netfs 'nfs' registered for caching [ 14.104063] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 15.505597] jme 0000:02:00.5: eth0: Link is up at ANed: 100 Mbps, Full-Duplex, MDI [ 15.508440] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.678563] eth0: no IPv6 routers present ** Model information sys_vendor: To be filled by O.E.M. product_name: To be filled by O.E.M. product_version: To be filled by O.E.M. chassis_vendor: To Be Filled By O.E.M. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: 4.6.5 board_vendor: Shuttle Inc. board_name: XS35V3 board_version: To be filled by O.E.M. ** Loaded modules: nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer snd soundcore jmb38x_ms processor iTCO_wdt evdev coretemp memstick video button iTCO_vendor_support i2c_i801 ext3 mbcache jbd btrfs crc32c libcrc32c zlib_deflate usbhid hid sg sd_mod crc_t10dif ahci libahci libata scsi_mod thermal fan thermal_sys uhci_hcd sdhci_pci jme mii sdhci mmc_core ehci_hcd gma500_gfx usbcore usb_common i2c_algo_bit drm_kms_helper drm i2c_core ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller [8086:0bf3] (rev 03) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller [8086:0be2] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at dfd00000 (32-bit, non-prefetchable) [size=1M] Region 1: I/O ports at f100 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: gma500 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at dff00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: c0600000-c07fffff Prefetchable memory behind bridge: 00000000c0800000-00000000c09fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: dfe00000-dfefffff Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c0000000-c01fffff Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at f0a0 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at f080 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at f060 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at f040 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at dff05000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 44 Region 0: I/O ports at f0f0 [size=8] Region 1: I/O ports at f0e0 [size=4] Region 2: I/O ports at f0d0 [size=8] Region 3: I/O ports at f0c0 [size=4] Region 4: I/O ports at f020 [size=16] Region 5: Memory at dff04000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at f000 [size=32] Kernel driver in use: i801_smbus 02:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382] (rev 80) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at dfe07000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 02:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381] (rev 80) (prog-if 01) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Physical Slot: 1 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 18 Region 0: Memory at dfe06000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 02:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383] (rev 80) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at dfe05000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: jmb38x_ms 02:00.5 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 03) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4012] Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=16K] Region 2: I/O ports at e100 [size=128] Region 3: I/O ports at e000 [size=256] Capabilities: <access denied> Kernel driver in use: jme ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 1267:0213 Logic3 / SpectraVideo plc Bus 005 Device 002: ID 0e6a:030c Megawin Technology Co., Ltd -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=, LC_CTYPE=fr_FR.ISO8859-15@euro (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-4-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.36+wheezy.1 ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org