Package: r8168-dkms Severity: important Dear Maintainer, RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10) needs realtec module to work.
Dmesg output [ 712.855476] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 712.855507] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 712.860322] r8169 0000:05:00.0: irq 41 for MSI/MSI-X [ 712.860918] r8169 0000:05:00.0 eth0: RTL8168g/8111g at 0xffffc900189a2000, 08:9e:01:eb:92:86, XID 10900880 IRQ 41 [ 712.860930] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 712.952135] r8169 0000:05:00.0 eth0: link down [ 712.952178] r8169 0000:05:00.0 eth0: link down [ 712.952241] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 772.590148] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 772.590167] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 772.595097] r8169 0000:05:00.0: irq 41 for MSI/MSI-X [ 772.595762] r8169 0000:05:00.0 eth0: RTL8168g/8111g at 0xffffc900189bc000, 08:9e:01:eb:92:86, XID 10900880 IRQ 41 [ 772.595769] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 772.626794] r8169 0000:05:00.0 eth0: link down [ 772.626913] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 772.673532] r8169 0000:05:00.0 eth0: link down [ 772.673722] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Interface is up nad visible via ifconfig, but device is dead. What info I need to provide? -- System Information: Debian Release: jessie/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.14-0.towo.3-siduction-amd64 (SMP w/4 CPU cores; PREEMPT) Locale: LANG=pl_PL.utf8, LC_CTYPE=pl_PL.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
