Package: clamav-milter Version: 0.98.4+dfsg-0+deb7u2 Severity: normal Bug #760219 also applies to clamav-milter.
-- Package-specific info: --- configuration --- Checking configuration files in /etc/clamav Config file: clamd.conf ----------------------- LogFile = "/var/log/clamav/clamav.log" StatsHostID = "auto" StatsEnabled disabled StatsPEDisabled = "yes" StatsTimeout = "10" LogFileUnlock disabled LogFileMaxSize = "4294967295" LogTime = "yes" LogClean disabled LogSyslog disabled LogFacility = "LOG_LOCAL6" LogVerbose disabled LogRotate = "yes" ExtendedDetectionInfo = "yes" PidFile = "/var/run/clamav/clamd.pid" TemporaryDirectory disabled DatabaseDirectory = "/var/lib/clamav" OfficialDatabaseOnly disabled LocalSocket = "/var/run/clamav/clamd.ctl" LocalSocketGroup = "clamav" LocalSocketMode = "666" FixStaleSocket = "yes" TCPSocket disabled TCPAddr disabled MaxConnectionQueueLength = "15" StreamMaxLength = "26214400" StreamMinPort = "1024" StreamMaxPort = "2048" MaxThreads = "12" ReadTimeout = "180" CommandReadTimeout = "5" SendBufTimeout = "200" MaxQueue = "100" IdleTimeout = "30" ExcludePath disabled MaxDirectoryRecursion = "15" FollowDirectorySymlinks disabled FollowFileSymlinks disabled CrossFilesystems = "yes" SelfCheck = "3600" DisableCache disabled VirusEvent disabled ExitOnOOM disabled AllowAllMatchScan = "yes" Foreground disabled Debug disabled LeaveTemporaryFiles disabled User = "clamav" AllowSupplementaryGroups disabled Bytecode = "yes" BytecodeSecurity = "TrustSigned" BytecodeTimeout = "60000" BytecodeUnsigned disabled BytecodeMode = "Auto" DetectPUA disabled ExcludePUA disabled IncludePUA disabled AlgorithmicDetection = "yes" ScanPE = "yes" ScanELF = "yes" DetectBrokenExecutables disabled ScanMail = "yes" ScanPartialMessages disabled PhishingSignatures = "yes" PhishingScanURLs = "yes" PhishingAlwaysBlockCloak disabled PhishingAlwaysBlockSSLMismatch disabled PartitionIntersection disabled HeuristicScanPrecedence disabled StructuredDataDetection disabled StructuredMinCreditCardCount = "3" StructuredMinSSNCount = "3" StructuredSSNFormatNormal = "yes" StructuredSSNFormatStripped disabled ScanHTML = "yes" ScanOLE2 = "yes" OLE2BlockMacros disabled ScanPDF = "yes" ScanSWF = "yes" ScanArchive = "yes" ArchiveBlockEncrypted disabled ForceToDisk disabled MaxScanSize = "104857600" MaxFileSize = "26214400" MaxRecursion = "10" MaxFiles = "10000" MaxEmbeddedPE = "10485760" MaxHTMLNormalize = "10485760" MaxHTMLNoTags = "2097152" MaxScriptNormalize = "5242880" MaxZipTypeRcg = "1048576" MaxPartitions = "50" MaxIconsPE = "100" ScanOnAccess disabled OnAccessIncludePath disabled OnAccessExcludePath disabled OnAccessExcludeUID disabled OnAccessMaxFileSize = "5242880" DevACOnly disabled DevACDepth disabled DevPerformance disabled DevLiblog disabled DisableCertCheck disabled Config file: freshclam.conf --------------------------- StatsHostID disabled StatsEnabled disabled StatsTimeout disabled LogFileMaxSize = "4294967295" LogTime = "yes" LogSyslog disabled LogFacility = "LOG_LOCAL6" LogVerbose disabled LogRotate = "yes" PidFile = "/var/run/clamav/freshclam.pid" DatabaseDirectory = "/var/lib/clamav" Foreground disabled Debug disabled AllowSupplementaryGroups disabled UpdateLogFile = "/var/log/clamav/freshclam.log" DatabaseOwner = "clamav" Checks = "24" DNSDatabaseInfo = "current.cvd.clamav.net" DatabaseMirror = "db.local.clamav.net", "database.clamav.net" PrivateMirror disabled MaxAttempts = "5" ScriptedUpdates = "yes" TestDatabases = "yes" CompressLocalDatabase disabled ExtraDatabase disabled DatabaseCustomURL disabled HTTPProxyServer disabled HTTPProxyPort disabled HTTPProxyUsername disabled HTTPProxyPassword disabled HTTPUserAgent disabled NotifyClamd = "/etc/clamav/clamd.conf" OnUpdateExecute disabled OnErrorExecute disabled OnOutdatedExecute disabled LocalIPAddress disabled ConnectTimeout = "30" ReceiveTimeout = "30" SubmitDetectionStats disabled DetectionStatsCountry disabled DetectionStatsHostID disabled SafeBrowsing disabled Bytecode = "yes" Config file: clamav-milter.conf ------------------------------- LogFile = "/var/log/clamav/clamav-milter.log" LogFileUnlock disabled LogFileMaxSize = "1048576" LogTime = "yes" LogSyslog disabled LogFacility = "LOG_LOCAL6" LogVerbose disabled LogRotate = "yes" PidFile = "/var/run/clamav/clamav-milter.pid" TemporaryDirectory = "/tmp" FixStaleSocket = "yes" MaxThreads = "10" ReadTimeout = "120" Foreground disabled User = "clamav" AllowSupplementaryGroups = "yes" MaxFileSize = "26214400" ClamdSocket = "unix:/var/run/clamav/clamd.ctl" MilterSocket = "/var/run/clamav/clamav-milter.ctl" MilterSocketGroup = "clamav" MilterSocketMode = "666" LocalNet disabled OnClean = "Accept" OnInfected = "Quarantine" OnFail = "Defer" RejectMsg disabled AddHeader = "Replace" ReportHostname disabled VirusAction disabled Chroot disabled Whitelist disabled SkipAuthenticated disabled LogInfected = "Off" LogClean = "Off" SupportMultipleRecipients disabled Software settings ----------------- Version: 0.98.4 Optional features supported: MEMPOOL IPv6 FRESHCLAM_DNS_FIX AUTOIT_EA06 BZIP2 JIT Database information -------------------- Database directory: /var/lib/clamav daily.cvd: version 19318, sigs: 1094665, built on Mon Sep 1 10:00:50 2014 main.cvd: version 55, sigs: 2424225, built on Tue Sep 17 10:57:28 2013 bytecode.cvd: version 242, sigs: 46, built on Tue Jun 24 18:21:59 2014 Total number of signatures: 3518936 Platform information -------------------- uname: GNU/kFreeBSD 9.2-RELEASE-p9 FreeBSD 9.2-RELEASE-p9 #0 r262572+cc525fe: Thu Jul 3 14:22:45 P x86_64 OS: kfreebsd-gnu, ARCH: x86_64, CPU: x86_64 zlib version: 1.2.7 (1.2.7), compile flags: a9 Triple: x86_64-pc-kfreebsd-gnu CPU: generic, Little-endian platform id: 0x09214d4d0804070201040702 Build information ----------------- GNU C: 4.7.2 (4.7.2) GNU C++: 4.7.2 (4.7.2) CPPFLAGS: -D_FORTIFY_SOURCE=2 CFLAGS: -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE CXXFLAGS: LDFLAGS: -Wl,-z,relro Configure: '--build=x86_64-kfreebsd-gnu' '--prefix=/usr' '--includedir=/usr/include' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc' '--localstatedir=/var' '--libexecdir=/usr/lib/clamav' '--disable-maintainer-mode' '--disable-dependency-tracking' 'CFLAGS=-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall' 'CPPFLAGS=-D_FORTIFY_SOURCE=2' 'CXXFLAGS=-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall' 'LDFLAGS=-Wl,-z,relro' '--with-dbdir=/var/lib/clamav' '--sysconfdir=/etc/clamav' '--disable-clamav' '--disable-unrar' '--enable-milter' '--enable-dns-fix' '--with-gnu-ld' '--with-system-tommath' '--without-included-ltdl' '-with-system-llvm=/usr/bin/llvm-config' 'build_alias=x86_64-kfreebsd-gnu' sizeof(void*) = 8 Engine flevel: 77, dconf: 77 --- data dir --- total 90386 -rw-r--r-- 1 clamav clamav 74230 Aug 31 21:39 bytecode.cvd -rw-r--r-- 1 clamav clamav 27601161 Aug 31 21:39 daily.cvd -rw-r--r-- 1 clamav clamav 64720632 Aug 31 21:39 main.cvd -rw------- 1 clamav clamav 52 Aug 31 21:59 mirrors.dat -- System Information: Debian Release: 7.6 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: kfreebsd-amd64 (x86_64) Kernel: kFreeBSD 9.2-RELEASE-p9 Locale: LANG=en_CA.utf8, LC_CTYPE=en_CA.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages clamav-milter depends on: ii adduser 3.113+nmu3 ii clamav-base 0.98.4+dfsg-0+deb7u2 ii clamav-freshclam [clamav-data] 0.98.4+dfsg-0+deb7u2 ii debconf [debconf-2.0] 1.5.49 ii dpkg 1.16.15 ii libc0.1 2.13-38+deb7u4 ii libmilter1.0.1 8.14.4-4 ii libssl1.0.0 1.0.1e-2+deb7u12 ii logrotate 3.8.1-4 ii lsb-base 4.1+Debian8+deb7u1 ii procps 1:3.3.3-3 ii ucf 3.0025+nmu3 Versions of packages clamav-milter recommends: ii clamav-daemon 0.98.4+dfsg-0+deb7u2 Versions of packages clamav-milter suggests: ii clamav-docs 0.98.4+dfsg-0+deb7u2 pn daemon <none> -- Configuration Files: /etc/init.d/clamav-milter changed: PATH=/sbin:/bin:/usr/sbin:/usr/bin DAEMON=/usr/sbin/clamav-milter DESC="Sendmail milter plugin for ClamAV" NAME=clamav-milter CLAMAVCONF=/etc/clamav/clamav-milter.conf SUPERVISOR=/usr/bin/daemon SUPERVISORNAME=daemon SUPERVISORPIDFILE="/var/run/clamav/daemon-clamav-milter.pid" SUPERVISORARGS="--name=$NAME --respawn $DAEMON -F $SUPERVISORPIDFILE" [ -x "$DAEMON" ] || exit 0 to_lower() { word="$1" lcword=$(echo "$word" | tr A-Z a-z) echo "$lcword" } is_true() { var="$1" lcvar=$(to_lower "$var") [ 'true' = "$lcvar" ] || [ 'yes' = "$lcvar" ] || [ 1 = "$lcvar" ] return $? } is_false() { var="$1" lcvar=$(to_lower "$var") [ 'false' = "$lcvar" ] || [ 'no' = "$lcvar" ] || [ 0 = "$lcvar" ] return $? } ucf_cleanup() { # This only does something if I've fucked up before # Not entirely impossible :( configfile=$1 if [ `grep "$configfile" /var/lib/ucf/hashfile | wc -l` -gt 1 ]; then grep -v "$configfile" /var/lib/ucf/hashfile > /var/lib/ucf/hashfile.tmp grep "$configfile" /var/lib/ucf/hashfile | tail -n 1 >> /var/lib/ucf/hashfile.tmp mv /var/lib/ucf/hashfile.tmp /var/lib/ucf/hashfile fi } add_to_ucf() { configfile=$1 ucffile=$2 if ! grep -q "$configfile" /var/lib/ucf/hashfile; then md5sum $configfile >> /var/lib/ucf/hashfile cp $configfile $ucffile fi } ucf_upgrade_check() { configfile=$1 sourcefile=$2 ucffile=$3 if [ -f "$configfile" ]; then add_to_ucf $configfile $ucffile ucf --three-way --debconf-ok "$sourcefile" "$configfile" else [ -d /var/lib/ucf/cache ] || mkdir -p /var/lib/ucf/cache cp $sourcefile $configfile add_to_ucf $configfile $ucffile fi } slurp_config() { CLAMAVCONF="$1" if [ -e "$CLAMAVCONF" ]; then for variable in `egrep -v '^[[:space:]]*(#|$)' "$CLAMAVCONF" | awk '{print $1}'`; do case "$variable" in DatabaseMirror) if [ -z "$DatabaseMirror" ]; then for i in `grep ^$variable $CLAMAVCONF | awk '{print $2}'`; do value="$value $i" done else continue fi ;; DatabaseCustomURL) if [ -z "$DatabaseCustomURL" ]; then for i in `grep ^$variable $CLAMAVCONF | awk '{print $2}'`; do value="$value $i" done else continue fi ;; IncludePUA) if [ -z "$IncludePUA" ]; then for i in `grep ^$variable $CLAMAVCONF | awk '{print $2}'`; do value="$i $value" done else continue fi ;; ExcludePUA) if [ -z "$ExcludePUA" ]; then for i in `grep ^$variable $CLAMAVCONF | awk '{print $2}'`; do value="$i $value" done else continue fi ;; ExtraDatabase) if [ -z "$ExtraDatabase" ]; then for i in `grep ^$variable $CLAMAVCONF | awk '{print $2}'`; do value="$value $i" done else continue fi ;; VirusEvent|OnUpdateExecute|OnErrorExecute|RejectMsg) value=`grep ^$variable $CLAMAVCONF | head -n1 | sed -e s/$variable\ //` ;; *) value=`grep "^$variable[[:space:]]" $CLAMAVCONF | head -n1 | awk '{print $2}'` ;; esac if [ -z "$value" ]; then export "$variable"="true" elif [ "$value" != "$variable" ]; then export "$variable"="$value" else export "$variable"="true" fi unset value done fi } pathfind() { OLDIFS=”$IFS” IFS=: for p in $PATH; do if [ -x ”$p/$*” ]; then IFS=”$OLDIFS” return 0 fi done IFS=”$OLDIFS” return 1 } set_debconf_value() { prog=$1 name=$2 eval variable="\$${name}" if [ -n "$variable" ]; then db_set clamav-$prog/$name "$variable" || true fi } make_dir() { DIR=$1 if [ -d "$DIR" ]; then return 0; fi [ -n "$User" ] || User=clamav mkdir -p -m 0755 "$DIR" chown "$User" "$DIR" pathfind restorecon && restorecon "$DIR" } isdigit () { case $1 in [[:digit:]]*) ISDIGIT=1 ;; *) ISDIGIT=0 ;; esac } inputdigit () { ISDIGIT=0 while [ "$ISDIGIT" = '0' ]; do db_input "$1" "$2" || true if ! db_go; then return 30 fi db_get $2 || true isdigit $RET if [ "$ISDIGIT" = '0' ]; then db_input critical clamav-base/numinfo || true db_go fi done return 0 } StateGeneric() { PRIO=$1 QUESTION=$2 NEXT=$3 LAST=$4 db_input $PRIO $QUESTION || true if db_go; then STATE=$NEXT else STATE=$LAST fi } StateGenericDigit() { PRIO=$1 QUESTION=$2 NEXT=$3 LAST=$4 inputdigit $PRIO $QUESTION || true if db_go; then STATE=$NEXT else STATE=$LAST fi } .. /lib/lsb/init-functions [ -r /etc/default/clamav-milter ] && . /etc/default/clamav-milter if [ ! -f "$CLAMAVCONF" ]; then log_failure_msg "There is no configuration file for clamav-milter." log_failure_msg "Please either dpkg-reconfigure $DESC, or copy the example from" log_failure_msg "/usr/share/doc/clamav-milter/examples/ to $CLAMAVCONF and run" log_failure_msg "'/etc/init.d/clamav-milter start'" if [ "$1" = "status" ]; then # program or service status is unknown exit 4; else # program is not configured exit 6; fi fi slurp_config "$CLAMAVCONF" [ -n "$User" ] || User=clamav if [ -n "$Example" ]; then log_failure_msg "$DESC is not configured." log_failure_msg "Please edit $CLAMAVCONF and run '/etc/init.d/clamav-milter start'" if [ "$1" = "status" ]; then # program or service status is unknown exit 4; else # program is not configured exit 6; fi fi if is_true "$Foreground"; then if [ ! -x "$SUPERVISOR" ] ; then log_failure_msg "Foreground specified, but $SUPERVISOR not found" if [ "$1" = "status" ]; then # program or service status is unknown exit 4; else # program is not configured correctly exit 6; fi else RUN_SUPERVISED=1 fi fi if [ -z "$RUN_SUPERVISED" ]; then THEPIDFILE="$PidFile" THEDAEMON="$NAME" RELOAD="1" else THEPIDFILE="$SUPERVISORPIDFILE" THEDAEMON="$SUPERVISORNAME" RELOAD="0" fi if [ -z "$THEPIDFILE" ] then log_failure_msg "$NAME: Can not continue with PidFile not set" if [ "$1" = "status" ]; then # program or service status is unknown exit 4; else # program is not configured correctly exit 6; fi fi if [ -z "$MilterSocket" ] then log_failure_msg "$NAME: Can not continue with MilterSocket not set" if [ "$1" = "status" ]; then # program or service status is unknown exit 4; else # program is not configured correctly exit 6; fi fi if [ ! -f "$THEPIDFILE" ] then touch "$THEPIDFILE" chown $User "$THEPIDFILE" fi wait_for_socket() { local socket; socket="$1" local retries; retries=${2:-15} local sleeptime; sleeptime=${3:-1} while [ $retries -gt 0 ]; do retries=$(($retries - 1)) [ -S "$socket" ] && break sleep $sleeptime done test $retries -ne 0 } change_socket_group() { local socket; socket="$1" local group; group="$2" local retries; retries=${3:-15} local sleeptime; sleeptime=${4:-1} [ -n "$group" ] || return 0 if wait_for_socket "$socket" $retries $sleeptime; then chmod g+w "$SOCKET_PATH" chgrp "$SOCKET_RWGROUP" "$SOCKET_PATH" else log_warning_msg "Tried to change socket group, but socket did not appear." fi } case "$MilterSocket" in /*) SOCKET_PATH="$MilterSocket" SOCKET_TYPE="local" ;; *) SOCKET_PATH="${MilterSocket#*:}" SOCKET_TYPE="${MilterSocket%%:*}" ;; esac SOCKET_TYPE="${SOCKET_TYPE:-local}" SOCKET="${SOCKET_TYPE}:${SOCKET_PATH}" [ -n "$User" ] || User=clamav [ -n "$DataBaseDirectory" ] || DataBaseDirectory=/var/run/clamav make_dir "$DataBaseDirectory" if [ "${SOCKET_TYPE}" = "local" ]; then make_dir $(dirname "$SOCKET_PATH") chown $User $(dirname "$SOCKET_PATH") fi make_dir $(dirname "$THEPIDFILE") if [ ! -f "$THEPIDFILE" ] then # If clam is run under a different UID than milter then we need # to make sure the THEPIDFILE can be written or else we won't be # able to kill it. touch $THEPIDFILE chown $User $THEPIDFILE fi case "$1" in start) if [ -z "$RUN_SUPERVISED" ] ; then log_daemon_msg "Starting $DESC" "$NAME" start-stop-daemon --start --oknodo -c $User --exec $DAEMON --pidfile $THEPIDFILE -- --config-file=$CLAMAVCONF ret=$? else log_daemon_msg "Starting $DESC" "$NAME (supervised)" $SUPERVISOR $SUPERVISORARGS ret=$? fi # try 15*1 seconds to change the socket group change_socket_group "$SOCKET_PATH" "$SOCKET_RWGROUP" 15 1 log_end_msg $ret ;; stop) log_daemon_msg "Stopping $DESC" "$NAME" start-stop-daemon --stop --oknodo --pidfile $THEPIDFILE --retry TERM/30/KILL/5 log_end_msg $? [ -e "$SOCKET_PATH" ] && rm -f $SOCKET_PATH ;; force-reload | restart) $0 stop sleep 2 $0 start ;; status) start-stop-daemon --status --pidfile $THEPIDFILE # start-stop-daemon returns LSB compliant exit status codes ret="$?" if [ "$ret" = 0 ]; then if [ "$SOCKET_TYPE" = "local" ] && [ ! -S $SOCKET_PATH ] ; then log_failure_msg "$NAME is running but socket is missing" # service status is unknown exit 4 fi log_success_msg "$NAME is running" else log_failure_msg "$NAME is not running" exit "$ret" fi ;; *) log_action_msg "Usage: $0 {start|stop|restart|force-reload|status}" >&2 # invalid arguments exit 2 ;; esac exit 0 -- debconf information: clamav-milter/LogFile: /var/log/clamav/clamav-milter.log clamav-milter/ReadTimeout: 120 clamav-milter/AddGroups: clamav-milter/LogFileMaxSize: 1M clamav-milter/LogSyslog: false clamav-milter/MilterSocket: /var/run/clamav/clamav-milter.ctl clamav-milter/OnFail: Defer clamav-milter/LocalNet: clamav-milter/OnInfected: Quarantine clamav-milter/debconf: true clamav-milter/LogTime: true clamav-milter/RejectMsg: clamav-milter/TemporaryDirectory: /tmp clamav-milter/LogRotate: true clamav-milter/SupportMultipleRecipients: false clamav-milter/MilterSocketMode: 666 clamav-milter/User: clamav clamav-milter/LogFacility: LOG_LOCAL6 clamav-milter/ClamdSocket: unix:/var/run/clamav/clamd.ctl clamav-milter/MilterSocketGroup: clamav clamav-milter/LogInfected: Off clamav-milter/MaxFileSize: 25 clamav-milter/PidFile: /var/run/clamav/clamav-milter.pid clamav-milter/FixStaleSocket: true clamav-milter/LogClean: Off clamav-milter/Foreground: false clamav-milter/LogFileUnlock: false clamav-milter/AddHeader: Replace clamav-milter/Chroot: clamav-milter/LogVerbose: false clamav-milter/Whitelist: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org