Package: linux-image-2.6.16-2-686
Version: 2.6.16-18
Severity: important
Got a kernel-message to submit when doing "scsiadd -a 00 05 00"
to activate my Artec-Scanner at this address.
------------[ cut here ]------------
kernel BUG at drivers/scsi/aic7xxx/aic7xxx_osm.c:535!
invalid opcode: 0000 [#1]
Modules linked in: nfs nfsd exportfs lockd nfs_acl sunrpc button ac
battery ipt_multiport ipt_LOG ipt_MASQUERADE iptable_nat xt_tcpudp
xt_state ip6table_filter ip6_tables iptable_filter ip_tables x_tables
ip_nat_tftp ip_nat_snmp_basic ip_nat_pptp ip_nat_irc ip_nat_ftp
ip_nat_amanda ip_conntrack_tftp ip_conntrack_proto_sctp
ip_conntrack_pptp ip_conntrack_netlink ip_nat ip_conntrack_netbios_ns
ip_conntrack_irc ip_conntrack_ftp ip_conntrack_amanda ip_conntrack
nfnetlink ppp_deflate zlib_deflate bsd_comp ppp_async ppp_generic
wlan_wep ipv6 ext2 dm_snapshot dm_mirror dm_mod loop wm8775 evdev
cx25840 i810_audio tda9887 ac97_codec tuner v4l2_common shpchp
pci_hotplug sg sr_mod st ivtv snd_intel8x0 snd_ac97_codec snd_ac97_bus
intel_agp agpgart firmware_class hisax_fcpcipnp hisax_isac hisax
crc_ccitt snd_pcm snd_timer isdn i2c_algo_bit i2c_i801 psmouse ath_pci
ath_rate_sample wlan ath_hal v4l1_compat tveeprom rtc slhc serio_raw
pcspkr i2c_core parport_pc parport analog gameport videodev floppy
snd_page_alloc usblp snd_mpu401 snd_mpu401_uart snd_rawmidi
snd_seq_device snd soundcore ext3 jbd mbcache ide_cd cdrom ide_disk piix
generic ide_core uhci_hcd usbcore aic7xxx scsi_transport_spi scsi_mod
3c59x e100 mii thermal processor fan
CPU: 0
EIP: 0060:[<d08ca27e>] Tainted: P VLI
EFLAGS: 00010086 (2.6.16-2-686 #1)
EIP is at ahc_linux_target_alloc+0xff/0x219 [aic7xxx]
eax: 00000000 ebx: cfc71ad4 ecx: cfca8400 edx: 00000005
esi: cf226c00 edi: cfca8580 ebp: cfca8548 esp: caaffe18
ds: 007b es: 007b ss: 0068
Process scsiadd (pid: 6761, threadinfo=caafe000 task=ca8a1550)
Stack: <0>cf233800 00000246 41ca8414 00000007 cf236034 00000000 cf2c4800
cfca8400
cf2c4804 cfca8404 b01fbbaf cf2c4800 cfca8400 cf2c4804 cfca8404
d086ef57
cfca8400 00000005 00000000 cf2c48d0 cfca84b0 cf2c4800 cfca8414
00000286
Call Trace:
[<b01fbbaf>] transport_add_device+0xe/0x11
[<d086ef57>] scsi_alloc_target+0x1bd/0x238 [scsi_mod]
[<d086f8a6>] __scsi_scan_target+0x45/0x577 [scsi_mod]
[<b0150bd5>] generic_permission+0x8d/0xc5
[<b0150ee7>] permission+0x77/0xac
[<b013372e>] get_page_from_freelist+0x7e/0x29f
[<d086ff04>] scsi_scan_host_selected+0xc3/0xdc [scsi_mod]
[<d087178f>] proc_scsi_write+0x136/0x22f [scsi_mod]
[<b01468cc>] vfs_write+0xa3/0x13a
[<b014714e>] sys_write+0x3b/0x64
[<b0102915>] syscall_call+0x7/0xb
Code: b6 96 32 01 00 00 89 54 24 0c 8b 91 3c 01 00 00 74 0e 0f b6 86 33
01 00 00 83 c2 08 89 44 24 0c 9c 8f 44 24 04 fa 83 3b 00 74 08 <0f> 0b
17 02 58 fc 8c d0 8b 4c 24 40 31 c0 89 0b b9 43 00 00 00
After this the SCSI-system wasn't usable anymore.
Even unloading Module was not possible.
I had to reboot the system.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Versions of packages linux-image-2.6.16-2-686 depends on:
ii initramfs-tools [linux-initra 0.80 tools for generating an initramfs
ii module-init-tools 3.2.2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.16-2-686 recommends:
pn libc6-i686 <none> (no description available)
-- debconf information:
linux-image-2.6.16-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.16-2-686/preinst/bootloader-initrd-2.6.16-2-686: true
linux-image-2.6.16-2-686/postinst/old-system-map-link-2.6.16-2-686: true
linux-image-2.6.16-2-686/preinst/failed-to-move-modules-2.6.16-2-686:
linux-image-2.6.16-2-686/preinst/overwriting-modules-2.6.16-2-686: true
linux-image-2.6.16-2-686/postinst/old-dir-initrd-link-2.6.16-2-686: true
linux-image-2.6.16-2-686/postinst/depmod-error-initrd-2.6.16-2-686: false
linux-image-2.6.16-2-686/postinst/create-kimage-link-2.6.16-2-686: true
linux-image-2.6.16-2-686/postinst/bootloader-test-error-2.6.16-2-686:
linux-image-2.6.16-2-686/prerm/removing-running-kernel-2.6.16-2-686: true
linux-image-2.6.16-2-686/postinst/depmod-error-2.6.16-2-686: false
linux-image-2.6.16-2-686/preinst/abort-install-2.6.16-2-686:
linux-image-2.6.16-2-686/postinst/bootloader-error-2.6.16-2-686:
linux-image-2.6.16-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.16-2-686/preinst/abort-overwrite-2.6.16-2-686:
linux-image-2.6.16-2-686/prerm/would-invalidate-boot-loader-2.6.16-2-686: true
* linux-image-2.6.16-2-686/preinst/already-running-this-2.6.16-2-686:
linux-image-2.6.16-2-686/preinst/elilo-initrd-2.6.16-2-686: true
linux-image-2.6.16-2-686/postinst/really-run-bootloader-2.6.16-2-686: true
linux-image-2.6.16-2-686/preinst/initrd-2.6.16-2-686:
linux-image-2.6.16-2-686/postinst/old-initrd-link-2.6.16-2-686: true
linux-image-2.6.16-2-686/preinst/lilo-initrd-2.6.16-2-686: true
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
