Hi there, I am currently running linux-image-2.6.32-5-686 and I checked /var/log/kern.log instead of /var/log/Xorg.0.log for clues after another "white screen" (I am pretty tired of testing suspend, because the white screen always happens when I am right in the middle of work), and here it is. Finally some meaningful log output to back up the bug report:
May 27 09:15:29 voltaire kernel: [16440.384972] render error detected, EIR: 0x00000010 May 27 09:15:29 voltaire kernel: [16440.384979] page table error May 27 09:15:29 voltaire kernel: [16440.384981] PGTBL_ER: 0x00000010 May 27 09:15:29 voltaire kernel: [16440.384986] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking May 27 09:15:29 voltaire kernel: [16440.384997] render error detected, EIR: 0x00000010 May 27 09:15:29 voltaire kernel: [16440.385000] page table error May 27 09:15:29 voltaire kernel: [16440.385002] PGTBL_ER: 0x00000010 For almost an hour nothing is in there before that time and nothing happens after that until I shut the machine down. Thx, Malte Problem remains the same, computer is fine after normal boot, but the screen goes white after pm-suspend, wake up, and then some time after that. Here is some log output from the wakeup about an hour earlier: May 27 08:23:03 voltaire kernel: [13290.179679] i915 0000:00:02.0: PCI INT A disabled May 27 08:23:03 voltaire kernel: [13290.192162] i915 0000:00:02.0: power state changed by ACPI to D3 May 27 08:23:03 voltaire kernel: [13290.336063] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 May 27 08:23:03 voltaire kernel: [13290.360073] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3 May 27 08:23:03 voltaire kernel: [13290.384073] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 May 27 08:23:03 voltaire kernel: [13290.424066] ACPI: Preparing to enter system sleep state S3 May 27 08:23:03 voltaire kernel: [13290.596383] Disabling non-boot CPUs ... May 27 08:23:03 voltaire kernel: [13290.596500] Extended CMOS year: 2000 May 27 08:23:03 voltaire kernel: [13290.596500] Back to C! May 27 08:23:03 voltaire kernel: [13290.596500] CPU0: Thermal monitoring enabled (TM2) May 27 08:23:03 voltaire kernel: [13290.596500] Extended CMOS year: 2000 May 27 08:23:03 voltaire kernel: [13290.596500] Force enabled HPET at resume May 27 08:23:03 voltaire kernel: [13290.596500] ACPI: Waking up from system sleep state S3 May 27 08:23:03 voltaire kernel: [13291.088143] agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106) May 27 08:23:03 voltaire kernel: [13291.088167] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007) May 27 08:23:03 voltaire kernel: [13291.088186] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x80200000) May 27 08:23:03 voltaire kernel: [13291.088219] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80118001) May 27 08:23:03 voltaire kernel: [13291.088227] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x7070) May 27 08:23:03 voltaire kernel: [13291.088241] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) and then another couple of lines concerning the i915: May 27 08:23:03 voltaire kernel: [13291.255521] i915 0000:00:02.0: power state changed by ACPI to D0 May 27 08:23:03 voltaire kernel: [13291.255573] i915 0000:00:02.0: power state changed by ACPI to D0 May 27 08:23:03 voltaire kernel: [13291.255583] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 27 08:23:03 voltaire kernel: [13291.255589] i915 0000:00:02.0: setting latency timer to 64 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org