Package: pcmcia-cs
Version: 3.2.8-5
I recently did a sid update and now my madwifi cardbus card doesn't
work; modules not loaded. It seems the card subsystem doesn't see it.
I'm using kernel 2.6.12.4 with Yenta bridge.
This is the update step: pcmcia-cs 3.2.8-3 -> 3.2.8-5
The update also updated libc6: 2.3.5-6
In syslog I get these errors when pcmcia starts:
Sep 16 10:27:43 localhost kernel: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xfffff
Sep 16 10:27:43 localhost kernel: cs: memory probe
0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
Sep 16 10:27:43 localhost kernel: cs: memory probe
0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
If I load the madwifi modules manually I get:
kernel: cs: unable to map card memory!
cardctl eject seems to provoke the following:
kernel: PCMCIA: socket ed30782c: *** DANGER *** unable to remove socket
power
If I try to plug in a pcmcia card such as a Xircom modem (which I don't
normally use meaning I don't know if these error are new) I get a
similar effect but the following error is reported:
cardmgr[3310]: executing: 'modprobe -r memory_cs 2>&1'
Sep 16 15:28:48 localhost cardmgr[3310]: + FATAL: Module memory_cs not
found.
Also whatever card is inserted:
# cardctl status
Socket 0:
3.3V CardBus card
function 0: [ready]
# cardctl info
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255
Dick
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
