dmesg消息:现在鼠标死了。usb 2.0的 Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-18etch3) ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Thu Apr 24 08:33:59 UTC 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000047fd0000 (usable) BIOS-e820: 0000000047fd0000 - 0000000047fde000 (ACPI data) BIOS-e820: 0000000047fde000 - 0000000048000000 (ACPI NVS) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 255MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 294864 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 65488 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f85d0 ACPI: RSDT (v001 A M I OEMRSDT 0x02000606 MSFT 0x00000097) @ 0x47fd0000 ACPI: FADT (v002 A M I OEMFACP 0x02000606 MSFT 0x00000097) @ 0x47fd0200 ACPI: MADT (v001 A M I OEMAPIC 0x02000606 MSFT 0x00000097) @ 0x47fd0390 ACPI: MCFG (v001 A M I OEMMCFG 0x02000606 MSFT 0x00000097) @ 0x47fd03f0 ACPI: BOOT (v001 A M I OEMBOOT 0x02000606 MSFT 0x00000097) @ 0x47fd0430 ACPI: OEMB (v001 A M I AMI_OEM 0x02000606 MSFT 0x00000097) @ 0x47fde040 ACPI: SSDT (v001 AMI CPU_CST 0x00000001 INTL 0x02002026) @ 0x47fd6d00 ACPI: DSDT (v001 AMJG_ AMJG_B32 0x00000b32 INTL 0x02002026) @ 0x00000000 ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 48000000:b6e00000) Detected 1700.233 MHz processor. Built 1 zonelists. Total pages: 294864 Kernel command line: root=/dev/hda4 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1161492k/1179456k available (1541k kernel code, 17084k reserved, 580k data, 196k init, 261952k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3404.02 BogoMIPS (lpj=6808041) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed ACPI: Core revision 20060707 CPU0: Intel(R) Celeron(R) M processor 1.70GHz stepping 08 Total of 1 processors activated (3404.02 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. Brought up 1 CPUs migration_cost=0 checking if image is initramfs... it is Freeing initrd memory: 4390k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: Power Resource [GFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 3 of device 0000:00:00.0 pnp: 00:07: ioport range 0xa00-0xa0f has been reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: fe100000-fe1fffff PREFETCH window: bdf00000-ddefffff PCI: Bus 3, cardbus bridge: 0000:02:01.0 IO window: 0000a000-0000a0ff IO window: 0000a400-0000a4ff PREFETCH window: 52000000-53ffffff MEM window: 54000000-55ffffff PCI: Bridge: 0000:00:14.4 IO window: a000-bfff MEM window: fe200000-feafffff PREFETCH window: ddf00000-dfefffff ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 177 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0xff set to 0x1 audit: initializing netlink socket (disabled) audit(1220951095.908:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185 ACPI: PCI interrupt for device 0000:00:14.6 disabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 196k freed ACPI: Transitioning device [FN00] to D3 ACPI: Transitioning device [FN00] to D3 ACPI: Fan [FN00] (off) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (42 C) input: AT Translated Set 2 keyboard as /class/input/input0 usbcore: registered new driver usbfs usbcore: registered new driver hub Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 177 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) 8139too Fast Ethernet driver 0.9.27 Time: acpi_pm clocksource has been installed. hda: HTS541060G9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ASUS SCB-2424A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 193 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 193, io mem 0xfebff000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 193 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.1: irq 193, io mem 0xfebfe000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 193 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:13.2: irq 193, io mem 0xfebfd000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 201 eth0: RealTek RTL8139 at 0xb800, 00:17:31:20:b5:81, IRQ 201 eth0: Identified 8139 chip type 'RTL-8100B/8139D' 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) hda: max request size: 512KiB hda: 117210240 sectors (60011 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 > hda4 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Linux agpgart interface v0.101 (c) Dave Jones piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device Yenta: CardBus bridge found at 0000:02:01.0 [1043:1187] input: PC Speaker as /class/input/input1 Real Time Clock Driver v1.12ac Yenta: ISA IRQ mask 0x06b8, PCI irq 177 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff cs: IO port probe 0xa000-0xbfff: clean. pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:02:01.1 [1180:0822] (rev 17) ACPI: PCI Interrupt 0000:02:01.1[C] -> GSI 18 (level, low) -> IRQ 209 mmc0: SDHCI at 0xfeaff800 irq 209 DMA PCI: Enabling device 0000:00:14.6 (0110 -> 0112) ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] irda_init() NET: Registered protocol family 23 MC'97 1 converters and GPIO not ready (0xff00) ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185 Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 input: SynPS/2 Synaptics TouchPad as /class/input/input2 ts: Compaq touchscreen protocol output EXT3 FS on hda4, internal journal loop: loaded (max 8 devices) device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED] pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.htmlfor details. SCSI subsystem initialized libata version 2.00 loaded. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [AC0] (on-line) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Power Button (CM) [PWRB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci_hcd 0000:00:13.0: wakeup usb 1-2: new low speed USB device using ohci_hcd and address 2 usb 1-2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: HID 413c:3010 as /class/input/input3 input: USB HID v1.10 Mouse [HID 413c:3010] on usb-0000:00:13.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! usb 1-2: USB disconnect, address 2 ohci_hcd 0000:00:13.0: IRQ INTR_SF lossage ohci_hcd 0000:00:13.0: bad entry 37786000
2008/9/8 zhihang wang <[EMAIL PROTECTED]> > 我的usb鼠标也经常用着用着死掉 > > 2008/9/8 zhihang wang <[EMAIL PROTECTED]> > >> 我是有线。等断网了,我把dmesg发出来。我不知道怎样判断问题。使用dmesg可以找到问题么? >> >> 2008/9/8 teng zhaozhi <[EMAIL PROTECTED]> >> >> 有线还是无线? >>> dmesg的最后10多行信息? >>> 你的硬件是什么? >>> >>> 这些我们要了解了才能给你这个作一些初步判断.... >>> >>> 2008/9/8 zhihang wang <[EMAIL PROTECTED]> >>> >>> 使用一段时间,大概1个多小时,网络就不通了,需要重新启动才可以。 >>>> 我的是debian 4.0 >>>> >>>> -- >>>> Best Regards >>>> zhihang wang >>>> >>> >>> >>> >>> -- >>> 滕召智 (Ben teng) >>> Tel: (010) 51660659 - 809 >>> Cell: 13381221392 >>> Fax: (010) 59792018 (0512) 62533261 >>> MSN: [EMAIL PROTECTED] >>> Skype: freet15 >>> >> >> >> >> -- >> Best Regards >> zhihang wang >> > > > > -- > Best Regards > zhihang wang > -- Best Regards zhihang wang