Nic wrote:
Ciao a tutti.Avevo postato alcuni giorni fa delle mail che
riguardavano problemi a una webcam integrata e una scheda usb per la
televisione digitale terrestre e acquisizione video.Da svariate prove
sono giunto alla conclusione che i driver delle due periferiche vanno
in conflitto impedendomi di usare una delle due.
Quindi mi piacerebbe che qualcuno molto più competente di me
confermasse la mia teoria.
Allora ho configurato la webcam che ha bus usb con questo
tutorial:http://paper0k.wordpress.com/2006/12/18/orbicam-finalmente-supportata/
mentre la scheda usb con
questo:http://www.2nrds.com/digital-tv-in-linux-with-em28xx-devices
Tutti e due i tutorial fnzionano e li ho provati prima con il kernel
2.6.18 di default di Etch poi anche con il 2.6.21 dei
backports,pensando che potesse risolvermi il problema.Ho provato anche
prima a configurare la webcam e poi la scheda ma allafine il risultato
è il medesimo e cioè che la webcam,pur avendo installato i suoi moduli
tramite i driver gspcav1 al caricamento ottengo questo risultato:
FATAL: Error inserting gspca
(/lib/modules/2.6.18-4-686/kernel/drivers/usb/media/gspca.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
mentre i driver della scheda Tv usb dal dmesg sono perfettamente attivi:
EEPROM ID= 0x9567eb1a
Vendor/Product ID= eb1a:e310
AC97 audio (5 sample rates)
500mA max power
Table at 0x04, strings=0x226a, 0x0000, 0x0000
tuner 1-0061: chip found @ 0xc2 (em28xx #0)
attach inform (default): detected I2C address c2
/usr/src/v4l/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback
tuner 0x61: Configuration acknowledged
/usr/src/v4l/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback
/usr/src/v4l/v4l-dvb-kernel/v4l/xc3028-tuner.c: attach request!
/usr/src/v4l/v4l-dvb-kernel/v4l/tuner-core.c: xc3028 tuner
successfully loaded
attach_inform: tvp5150 detected.
tvp5150 1-005c: tvp5150am1 detected.
Loading base firmware: xc3028_init0.i2c.fw
Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
xc3028-tuner.c: firmware 2.7
ANALOG TV REQUEST
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em2880-dvb.c: DVB Init
Loading base firmware: xc3028_8MHz_init0.i2c.fw
Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
xc3028-tuner.c: firmware 2.7
Sending extra call for Digital TV!
/usr/src/v4l/v4l-dvb-kernel/v4l/xc3028-tuner.c: attach request!
DVB: registering new adapter (em2880 DVB-T)
DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
em28xx #0: Found MSI DigiVox A/D
em28xx audio device (eb1a:e310): interface 1, class 1
Come potrete notare la scheda usb,tramite il driver em28xx,viene
riconosciuta con i device /dev/video0 e /dev/vbi0 che è poi quello che
usano anche i driver gspcav1 e camorama per la webcam.Naturalmente
nemmeno amsn riesce ad utilizzarla.
Quindi secondo voi mi devo rassegnare a non utilizzare una delle due
periferiche,oppure provando a creare un device supplementare?Oppure
una delle due può secondo voi adattarsi ad usare il driver
dell'altra.....ma come?
Grazie a tutti
Ho letto velocemente la mai e quindi forse c'entra ancora meno di nulla.
Sorry!
Io ho un problema quasi analogo: ho da una parte una webcam (logitech
5000 Pro) che va benissimo con il modulo uvc compilato e un ricevitore
tv card usb (Terratec Cinergy XS usb) che va benissimo con il modulo em28xx.
Il problema è che entrambe le periferiche non vanno, anzi, il modulo
em28xx non fa più andare la webcam... Per ora credo che sia un conflitto
tra i devices assegnati dai moduli (penso per entrambi /dev/video), ma
non so dirti molto di più se non di cercare nella mailing list di em28xx
e in quella di uvc-video, ché qualche mese fa avevo esposto lì il mio
problema, ma nessuno ha mai risposto. Magari trovi una spiegazione
convincente ed un metodo per risolvere (sia il tuo che il mio problema)!
enjoy, ;)
giopas
--
"The paradigm of competition is a race: by
rewarding the winner, we encourage everyone
to run faster. When capitalism really works
this way, it does a good job; but its defenders
are wrong in assuming it always works this way.
If the runners forget why the reward is offered
and become intent on winning, no matter how, they
may find other strategies--such as, attacking
other runners. If the runners get into a fist
fight, they will all finish late."
(GNU manifesto/R. Stallman)
--
Per REVOCARE l'iscrizione alla lista, inviare un email a
[EMAIL PROTECTED] con oggetto "unsubscribe". Per
problemi inviare un email in INGLESE a [EMAIL PROTECTED]
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]