Package: linux-image-2.6.17-2-486
Version: 2.6.17-6
Severity: normal
hi. i'm getting a kernel panic when using a serial console. log should
be attached. seems to work fine when booting with a regular console.
(also had this problem with linux-image-2.6.17-1-486 version 2.6.17-5).
serial console with this setup does work using linux-image-2.6.16-2-486
2.6.16-17.
live well,
vagrant
Linux version 2.6.17-2-486 (Debian 2.6.17-6) ([EMAIL PROTECTED]) (gcc version
4.1.2 20060729 (prerelease) (Debian 4.1.1-10)) #1 Fri Aug 11 20:00:44 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffc0000 (usable)
BIOS-e820: 000000000ffc0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
255MB LOWMEM available.
DMI 2.3 present.
Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=vmlinuz ro initrd=initrd.img root=/dev/nfs
ip=dhcp console=ttyS0,38400 acpi=off apm=off
Local APIC disabled by BIOS -- you can enable it with "lapic"
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 801.901 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 253768k/261888k available (1452k kernel code, 7692k reserved, 558k
data, 228k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1605.74 BogoMIPS (lpj=3211480)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: Intel Pentium III (Coppermine) stepping 06
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 0k freed
checking if image is initramfs... it is
Freeing initrd memory: 2940k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=0
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xb00f2570
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x1e3d, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
PCI: Probing PCI hardware
PCI quirk: region 0400-043f claimed by PIIX4 ACPI
PCI quirk: region 0440-044f claimed by PIIX4 SMB
PIIX4 devres B PIO at 0060-0067
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:09: ioport range 0xcf8-0xcff has been reserved
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1155685123.292:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
Freeing unused kernel memory: 228k freed
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
FATAL: Error inserting fan
(/lib/modules/2.6.17-2-486/kernel/drivers/acpi/fan.ko): No such device
FATAL: Error inserting thermal
(/lib/modules/2.6.17-2-486/kernel/drivers/acpi/thermal.ko): No such device
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: Found IRQ 10 for device 0000:00:0c.0
PCI: Sharing IRQ 10 with 0000:00:0d.0
e100: eth0: e100_probe: addr 0xfebef000, irq 10, MAC addr 00:02:B3:35:F3:FA
PCI: Found IRQ 10 for device 0000:00:0d.0
PCI: Sharing IRQ 10 with 0000:00:0c.0
e100: eth1: e100_probe: addr 0xfebee000, irq 10, MAC addr 00:02:B3:35:F3:FB
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
PCI: Found IRQ 11 for device 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:10.0
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000ef80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/nfs-top ...
Done.
IP-Config: eth0 hardware address 00:02:b3:35:f3:fa mtu 1500 DHCP RARP
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
IP-Config: eth0 guessed broadcast address 10.1.3.255
IP-Config: eth0 guessed nameserver address 10.1.3.2
IP-Config: eth0 complete (from 10.1.3.2):
address: 10.1.3.253 broadcast: 10.1.3.255 netmask: 255.255.255.0
gateway: 0.0.0.0 dns0 : 10.1.3.2 dns1 : 0.0.0.0
domain : example.org
rootserver: 10.1.3.2 rootpath: /opt/ltsp/i386
filename : /ltsp/i386/pxelinux.0
Begin: Running /scripts/nfs-premount ...
Done.
Begin: Running /scripts/nfs-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...input: PC Speaker as
/class/input/input0
PCI: Found IRQ 5 for device 0000:00:0e.0
0000:00:0e.0: ttyS2 at I/O 0xeff0 (irq = 5) is a 16550A
0000:00:0e.0: ttyS3 at I/O 0xefe0 (irq = 5) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
PIIX4: neither IDE port enabled (BIOS)
Real Time Clock Driver v1.12ac
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
ts: Compaq touchscreen protocol output
mice: PS/2 mouse device common for all mice
BUG: unable to handle kernel NULL pointer dereference at virtual address
0000000c
printing eip:
b01f405b
*pde = 00000000
Oops: 0000 [#1]
Modules linked in: mousedev tsdev i2c_piix4 i2c_core evdev 8250_pnp rtc generic
piix ide_core parport_serial parport_pc parport 8250_pci pcspkr psmouse
serio_raw nfs lockd nfs_acl sunrpc uhci_hcd usbcore e100 mii processor
CPU: 0
EIP: 0060:[<b01f405b>] Not tainted VLI
EFLAGS: 00010206 (2.6.17-2-486 #1)
EIP is at uart_write_room+0x9/0x16
eax: bff6a000 ebx: 00000006 ecx: bf501f34 edx: 00000000
esi: bf52d000 edi: bf4f2800 ebp: 00000006 esp: bf501f18
ds: 007b es: 007b ss: 0068
Process S03udev (pid: 1659, threadinfo=bf500000 task=bfdc55c0)
Stack: b01e871c bf4f2800 bfd96d20 bfd01a54 00000000 bfdc55c0 b0112612 bf52d128
bf52d128 00000006 bf52d000 00000006 00000006 b01e65cc 00000006 080f6408
bfd96d20 b01e863c bf52d00c bf52d3d0 00000000 bfd01a54 bfd01a20 bfd96d20
Call Trace:
<b01e871c> write_chan+0xe0/0x292 <b0112612> default_wake_function+0x0/0xc
<b01e65cc> tty_write+0x143/0x1cb <b01e863c> write_chan+0x0/0x292
<b01e6ac4> redirected_tty_write+0x0/0x30 <b0145931> vfs_write+0xa4/0x144
<b0145e2f> sys_write+0x3e/0x65 <b0102977> syscall_call+0x7/0xb
Code: 00 00 74 13 8b 39 89 f0 88 04 17 8b 41 04 40 25 ff 0f 00 00 89 41 04 53
9d 5b 5e 5f c3 e9 bd fe ff ff 8b 80 6c 01 00 00 8b 50 10 <8b> 42 0c 2b 42 08 48
25 ff 0f 00 00 c3 8b 80 6c 01 00 00 8b 50
EIP: [<b01f405b>] uart_write_room+0x9/0x16 SS:ESP 0068:bf501f18
