Добрый день! Недавно установил Debian stretch на новый ноут с i7 Skylake. Хотел настроить мониторинг частоты ядер процессора, но традиционный способ с cpufrequtils не работал, были доступны два governer: powersave и performance. После некоорго гугления, выяснил, что новыем intel ядра работют через intel_pstate драйвер. Вот вывод:
# cpupower -c 0 frequency-info analyzing CPU 0: driver: intel_pstate CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: Cannot determine or is not supported. hardware limits: 800 MHz - 3.50 GHz available cpufreq governors: performance powersave current policy: frequency should be within 800 MHz and 3.50 GHz. The governor "powersave" may decide which speed to use within this range. current CPU frequency: 800 MHz (asserted by call to hardware) boost state support: Supported: yes Active: yes То есть частота мониторится железом и никакой настройки не требуется. Я прав?