Настраиваю Pinnacle PCTV Pro. Не получается: xawtv падает в coredump. Предложения?
dmesg: Linux video capture interface: v1.00 bttv: driver version 0.9.12 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 17, latency: 32, mmio: 0xdc000000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init] bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes bttv0: using tuner=33 bttv0: i2c: checking for MSP34xx @ 0x80... found msp34xx: init: chip=MSP3410G-B11 +nicam +simple +radio bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found msp3410: daemon started tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic 16c54 (PV951),ta8874z tvaudio: found pic16c54 (PV951) @ 0x96 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok lspci: 01:09.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11) Subsystem: Pinnacle Systems Inc.: Unknown device 0012 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at dc000000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:09.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11) Subsystem: Pinnacle Systems Inc.: Unknown device 0012 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at dc001000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- xawtv: This is xawtv-3.72, running on Linux/i686 (2.6.4) visual: id=0x21 class=4 (TrueColor), depth=24 visual: id=0x22 class=5 (DirectColor), depth=24 visual: id=0x23 class=4 (TrueColor), depth=24 visual: id=0x24 class=4 (TrueColor), depth=24 visual: id=0x25 class=4 (TrueColor), depth=24 visual: id=0x26 class=4 (TrueColor), depth=24 visual: id=0x27 class=4 (TrueColor), depth=24 visual: id=0x28 class=4 (TrueColor), depth=24 visual: id=0x29 class=4 (TrueColor), depth=24 visual: id=0x2a class=5 (DirectColor), depth=24 visual: id=0x2b class=5 (DirectColor), depth=24 visual: id=0x2c class=5 (DirectColor), depth=24 visual: id=0x2d class=5 (DirectColor), depth=24 visual: id=0x2e class=5 (DirectColor), depth=24 visual: id=0x2f class=5 (DirectColor), depth=24 visual: id=0x30 class=5 (DirectColor), depth=24 check if the X-Server is local ... **** ok x11 socket: me=localhost, server=localhost main: dga extention... DGA version 2.0 main: xinerama extention... main: xvideo extention... Xvideo: 3 adaptors available. Xvideo: NV04 Video Overlay: input image, ports 78-78 Xvideo: NV05 Video Blitter: input image, ports 79-110 Xvideo: NVIDIA Video Interface Port: input video, ports 111-111 Xvideo: using port 111 for video XV_ENCODING get set, 0 -> 1 XV_COLORKEY get set, 0 -> 16777215 XV_AUTOPAINT_COLORKEY get set, 0 -> 1 XV_SET_DEFAULTS set, 0 -> 0 image format list for port 78 0x32595559 (YUY2) packed [ok] 0x32315659 (YV12) planar 0x59565955 (UYVY) packed 0x30323449 (I420) planar [ok] main: init main window... x11: color depth: 24 bits, 3 bytes - pixmap: 4 bytes x11: color masks: red=0x00ff0000 green=0x0000ff00 blue=0x000000ff x11: server byte order: little endian x11: client byte order: little endian main: install signal handlers... main thread [pid=1138] main: checking wm... wmhooks: gnome main: creating windows ... main: read config file ... main: checking for vidmode extention ... main: checking for lirc ... xawtv: could not connect to socket xawtv: No such file or directory lirc: no infrared remote support available main: checking for joystick ... main: checking for midi ... main: mapping main window ... xt: pointer show main: initialize hardware ... [pid=1138] segfault catched, aborting -- Best regards, Yury A. Yurevich Registered Linux User #276311 Debian 3.0r1 Woody kernel 2.6.3