Also sprach Evgeni Golov <[EMAIL PROTECTED]> (Mon, 6 Feb 2006 19:05:29 +0100): > On Mon, 6 Feb 2006 13:04:00 +0100 > Michelle Konzack <[EMAIL PROTECTED]> wrote: > > > Am 2006-02-05 10:45:41, schrieb Jan Luehr: > > > > > Ja. So lange aber nur Sarge darauf laufen soll, müssen aber nicht > > > 200GB erkannt werden. Linux hat seine eigenen IDE Treiber. > > > > Aber der Controller kann z.B. pysikatlisch nicht mehr als 130 > > GByte... Be den Alten Mainboards ist die Warscheinlichkeit groß, das > > der Controller kapituliert. > > Tut er bei meinem PIII-500 nicht (Asus Board mit Intel-Controller). > Dementsprechend würd ich mal sagen: Glückssache.
Keine Gluecksache. Die 137.4 GB Grenze faellt mit dem ATA-6 Standard (das Protokoll), der 48 bit'iges LBA einfuehrt. Das ist ein Protokollwechsel/-erweiterung und hat maximal mit der Firmware/Revision des IDE Controllers zu tun. Datasheets zu dem Mainboard sollten das klaeren koennen -- ich vermute aber, dass es moeglich ist diese Festplatte zu betreiben. -------8<------- The old ATA standard describes how to address a sector on an IDE disk using 28 bits (8 bits for the sector, 4 for the head, 16 for the cylinder). This means that an IDE disk can have at most 2^28 addressable sectors With 512-byte sectors this is 2^37 bytes, that is, 137.4 GB. The ATA-6 standard includes a specification how to address past this 2^28 sector boundary. The new standard allows addressing of 2^48 sectors. There is support in recent Linux kernels that have incorporated Andre Hedrick's IDE patch, for example 2.4.18-pre7-ac3 and 2.5.3. -------8<-------- > > Greetings > > Michelle Konzack > > Ob du mal deine verdammte Schwanzverlängerung von Signatur > abschaltest? Find's zwar auch nervig bzw. zumindest deplatziert, dennoch, kannst du das in Zukunft bitte neutraler Formulieren? Schoenen Dank. > Gruß > Evgeni sl ritch