Hallo, seit einem Rechnerabsturz funktioniert meine TV-Karte nicht mehr
[EMAIL PROTECTED]:~$ xawtv This is xawtv-3.72, running on Linux/i686 (2.4.20) v4l: timeout (got SIGALRM), hardware/driver problems? ioctl: VIDIOCSYNC(0): Interrupted system call ioctl: VIDIOCMCAPTURE(0,fmt=4,size=48x32): Device or resource busy ioctl: VIDIOCMCAPTURE(0,fmt=1,size=48x32): Device or resource busy ioctl: VIDIOCMCAPTURE(0,fmt=7,size=48x32): Device or resource busy ioctl: VIDIOCMCAPTURE(0,fmt=13,size=48x32): Device or resource busy ioctl: VIDIOCMCAPTURE(0,fmt=15,size=48x32): Device or resource busy no way to get: 384x288 32 bit TrueColor (LE: bgr-) [EMAIL PROTECTED]:~$ a1:~# modprobe bttv Using /lib/modules/2.4.20/kernel/drivers/media/video/tuner.o insmod: a module named tuner already exists /lib/modules/2.4.20/kernel/drivers/media/video/bttv.o: post-install bttv failed /lib/modules/2.4.20/kernel/drivers/media/video/bttv.o: insmod bttv failed in /var/log/kern.log wir folgendes geloggt: Jun 26 22:28:03 a1 kernel: bttv: driver version 0.7.96 loaded Jun 26 22:28:03 a1 kernel: bttv: using 4 buffers with 2080k (8320k total) for capture Jun 26 22:28:03 a1 kernel: bttv: Host bridge is PCI device 1106:3099 Jun 26 22:28:03 a1 kernel: bttv: Bt8xx card found (0). Jun 26 22:28:03 a1 kernel: bttv0: Bt878 (rev 2) at 00:07.0, irq: 11, latency: 64, mmio: 0x9ddfc000 Jun 26 22:28:03 a1 kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb Jun 26 22:28:03 a1 kernel: bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected] Jun 26 22:28:03 a1 kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] Jun 26 22:28:03 a1 kernel: tuner: probing bt848 #0 i2c adapter [id=0x10005] Jun 26 22:28:03 a1 kernel: i2c-core.o: adapter bt848 #0 registered as adapter 1. Jun 26 22:28:03 a1 kernel: bttv: readee error Jun 26 22:28:03 a1 kernel: bttv0: Hauppauge eeprom: invalid Jun 26 22:28:03 a1 kernel: bttv0: Hauppauge eeprom: model=0, tuner= (4), radio=no Jun 26 22:28:03 a1 kernel: bttv0: using tuner=4 Jun 26 22:28:03 a1 kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found Jun 26 22:28:03 a1 kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found Jun 26 22:28:03 a1 kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found Jun 26 22:28:03 a1 kernel: bttv0: registered device video0 Jun 26 22:28:03 a1 kernel: bttv0: registered device vbi Kann das sein, dass der eeprom irgendwas abbekommen hat? (ich hab mal gehoert, dass man den vorher absichern sollte) Oder hat sonst jemand ne Idee? Gruss Achim -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
